Timing belt and water pump kit OPEL KADETT E Hatchback (T85) 1.3 N (C08, C48, D08, D48) (44kW / 60hp) 1984 - 1993
| Number of Teeth | 104 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.114kg |
| Width | 15mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft |
| More information » | |
$3,20
$3,80
-16%
ADD TO BASKET
| Number of Teeth | 104 |
| Width | 17mm |
$4,00
$4,60
-14%
ADD TO BASKET
| Number of Teeth | 104 |
| Length | 991mm |
| Width | 15mm |
| Tooth Pitch | 9.525mm |
$4,90
$5,70
-15%
ADD TO BASKET
| Width | 15mm |
| Number of Teeth | 104 |
| Belts | with trapezoidal tooth profile |
| Weight | 0.106kg |
| Observe service information | |
$5,30
$6,20
-15%
ADD TO BASKET
| Number of Teeth | 104 |
| Width | 15mm |
| Driven units | Camshaft |
| Vehicle configuration line / variant | CR |
| Article number of the recommended special tool | STT-1 |
| Tensile Cord Material | Fiberglass |
| Belt Material | Polychloroprene (Neoprene) |
| Colour | black |
| Number of Teeth | 104 |
| Width | 15mm |
| Tooth Pitch | 9.525mm |
| Length | 991mm |
| Driven units | Camshaft |
| More information » | |
| Number of Teeth | 104 |
| Width | 17mm |
| Driven units | Camshaft |
| Vehicle configuration line / variant | CR |
| Weight | 0.34kg |
| Ø | 59mm |
| Tensioner Pulley Actuation | Automatic |
| Width | 30mm |
$7,10
$8,40
-16%
ADD TO BASKET
| Width | 19mm |
| Outer Diameter | 59mm |
| Supplementary Article/Supplementary Info | with fastening/mounting material |
| Tensioner Pulley Actuation | Automatic |
| Supplementary Article/Info 2 | with screw |
$14,40
$16,90
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with gasket/seal |
| Number of Teeth | 19 |
$14,90
$17,50
-15%
ADD TO BASKET
| Operating Mode | Mechanical |
| Number of Teeth | 19 |
| Supplementary Article/Supplementary Info | with gasket/seal |
| Belt Pulley Ø | 56.2mm |
$16,90
$19,80
-15%
ADD TO BASKET
| Number of Teeth | 19 |
| Operating Mode | Mechanical |
| Supplementary Article/Supplementary Info | do not use sealant |
| Supplementary Article/Info 2 | with seal ring |
| Number of blades/vanes | 8 |
| Water Pump Pulley Ø | 60mm |
| Impeller Ø | 55mm |
| Water Pump Type | for timing belt drive |
| Water pump impeller material | Grey Cast Iron |
| Construction Year from | 01.1985 |
| More information » | |
$20,00
$23,60
-16%
ADD TO BASKET
| Width 1 | 30mm |
| Outer Diameter 1 | 59mm |
$21,80
$25,70
-16%
ADD TO BASKET
| Operating Mode | Mechanical |
| Supplementary Article/Supplementary Info | with gasket/seal |
| Number of Teeth | 19 |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
