Battery charger PRAKTIK CHARGER 8 LCD, voltage for charging: 6/12 V IDEAL 10/180, current for charging: 8A, voltage Power: 230V, type battery: AGM/EFB/GEL/MF/WET

smart portable charger 6- and 12-voldiste acid-, gel-, AGM-, MF-, EFB-batteries for charging. Input 230V, The charging voltage 6/12V, Charging current 2/8A.
EAN code:
5903991103475

Technical parameetrid
PRAKTIK CHARGER 8  on electronic charger 6- and 12-voldiste pliihappeakude (tavaakud on cars and on other vehicles) for charging:

suitable for
wet  (fluid - acidic)
GEL  (gel)
MF  (maintenance-free)
AGM  (klaaskiudmatiga)
EFB  (start-stopp-system vehicles)
Alaldil on  mikroprotsessori juhtimissüsteem , which ensures automated väljalülitumise after battery nõutava voltage saavutamist and charging automated jätkamise after battery pingelangust.

each kord, kui charger in lülitatakse, määrab this automatically  viimati salvestatud parameetrid  (helpful korduval when using and voolukatkestuse korral).

Külmlaadimise function  : optimizes charging very at low at temperatures (low temperature may negatiivselt mõjutada battery components keemilist struktuuri).

Laadimisprotsess
9-etapiline laadimisprotsess  ensures battery optimal laadimistingimused. automatic juhtimissüsteem reguleerib all 9 laadimisetappi, et battery properly to charge: 

1. pitch – diagnostics  – analyzes batteries and checks, kas this suudab against võtta charging current; prevents damaged battery charging.
2. pitch – repair charging  – madalpinge batteries laaditakse algselt low with current, but elevated voltage; very tühjenenud batteries can restore töökorda and this ensures battery with longer tööea, this pitch jäetakse vahele, kui battery on minimaalselt tühjenenud and in a good condition.
3. ETAPP – soft start  – inverter increases järk-järgult charging current, up to will be achieved set Charging current.
4. pitch – PULSELAADIMINE  – batteries laetakse impulssvooluga (impulsi kõikumised on direct current AC in the range of).
5. ETAPP – KONDITSEERIMINE  – ettevalmistav etapp hulgilaadimise etapis for charging.
6. pitch – HULKLAADIMINE  – charging konstantse power value prior seadistatud pingeni (14,4÷14,7V).
7. pitch – ABSORPTSIOONILAADIMINE  – after battery nõutava state of charge level saavutamist lülitub this pideva voltage (CV) laadimisele and laadimisprotsess lõppeb.
8. pitch – HINDAMISE diagnostics  – battery voltage automatic jälgimine after charging lõppemist.
9. ETAPP – HOOLDUSLAAD  – batteries hooldav (floating) and It's condition jälgiv etapp; jätkab if necessary charging reduced with current.

füüsikalised parameetrid
device is equipped with protection polarity Short Circuit, overload and vastupidise polarity against.

charger core on  IP65 kaitseaste  (splashes- and dust proof).

power parameetrid
230 V one phase  toiteallikas . device is equipped with sockets.

equipment
Tarne contains device with cables. Toitejuhtme length on 160cm, polaarkaablite length 110cm.


Nimitoitepinge
230V; 50Hz (1ph)
Power
110W
safety level
IP65
Kaalud
665 g
Üldmõõtmed length x width x height
212x100x60 mm
Packing dimesions P x L x K
68x145x280mm
The charging voltage
6/12V
Charging current
2A (6V) / 2/8A (12V)
battery nimimaht Ah 15h (min/max)
1,2-80Ah (6V), 10-180Ah (12V), hooldustasu up to 300Ah