SMART CHARGER 15 LCD 12/24V
Goods available only in e-shop
106,30€
Delivery: home 3-4wd
ADD TO BASKET
Intelligent rectifier for charging WEL/GEL/MF/AGM batteries. 9-step charging process. LCD display. Power supply 230V. Charging voltage 12V/24V. Charging current 15A.
Rated supply voltage
220÷240V, 50Hz
Power
250W
Level of security
IP20
Libra
0.95 kg
Overall dimensions: length x width x height
115x200x60 mm
Packaging dimensions: length x width x height
120x100x240 mm
Charging voltage
12V/24V
Charging current
8A (12/24V) / 15A (12/24V)
Rated battery capacity Ah 15h (min/max)
1.2-350Ah
Charging process
The 9-step charging process ensures optimal battery charging conditions. The automatic control system will adjust each of the 9 charging stages to properly charge the battery:
STEP 1 - Diagnostic - analyzes the battery and checks whether it can accept the charging current; prevents charging of a damaged battery
STAGE 2 - Recovery charge - low voltage batteries are initially charged with a low current, but with an increased voltage; very discharged batteries can be restored to a usable state and this ensures a longer battery life, this step is skipped if the battery is minimally discharged and in good condition.
STEP 3 - Soft start - the rectifier gradually increases the charging current until the set charging current is reached
STEP 4 - Pulse charge - the battery is charged with a pulsed current (pulse fluctuations take place in the DC current range)
STAGE 5 - Reconditioning - preparatory stage for charging in the bulk charge stage
STEP 6 - Bulk charge – charging with a constant current to the previously set voltage (14.4÷14.7V)
STEP 7 - Absorption charge - after reaching the required battery charge level, it will change to constant voltage (CV) charging and the charging process will end
STEP 8 - Evaluation diagnostic - automatic monitoring of battery voltage after charging
STAGE 9 - Maintenance charge – the stage supporting the battery (float) and monitoring its condition; resumes charging at reduced current if necessary.
Rated supply voltage
220÷240V, 50Hz
Power
250W
Level of security
IP20
Libra
0.95 kg
Overall dimensions: length x width x height
115x200x60 mm
Packaging dimensions: length x width x height
120x100x240 mm
Charging voltage
12V/24V
Charging current
8A (12/24V) / 15A (12/24V)
Rated battery capacity Ah 15h (min/max)
1.2-350Ah
Charging process
The 9-step charging process ensures optimal battery charging conditions. The automatic control system will adjust each of the 9 charging stages to properly charge the battery:
STEP 1 - Diagnostic - analyzes the battery and checks whether it can accept the charging current; prevents charging of a damaged battery
STAGE 2 - Recovery charge - low voltage batteries are initially charged with a low current, but with an increased voltage; very discharged batteries can be restored to a usable state and this ensures a longer battery life, this step is skipped if the battery is minimally discharged and in good condition.
STEP 3 - Soft start - the rectifier gradually increases the charging current until the set charging current is reached
STEP 4 - Pulse charge - the battery is charged with a pulsed current (pulse fluctuations take place in the DC current range)
STAGE 5 - Reconditioning - preparatory stage for charging in the bulk charge stage
STEP 6 - Bulk charge – charging with a constant current to the previously set voltage (14.4÷14.7V)
STEP 7 - Absorption charge - after reaching the required battery charge level, it will change to constant voltage (CV) charging and the charging process will end
STEP 8 - Evaluation diagnostic - automatic monitoring of battery voltage after charging
STAGE 9 - Maintenance charge – the stage supporting the battery (float) and monitoring its condition; resumes charging at reduced current if necessary.
231,40€
277,70€
-17%
ADD TO BASKET
Delivery: home 3-4wd
31,30€
ADD TO BASKET
Delivery: home 3-4wd
153,80€
184,50€
-17%
ADD TO BASKET
Delivery: home 3-4wd
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
