tire repair kit, drill, stud, glue, strings 5 ​​pcs

manual:
1. remove the nail from the tire.
2. cover the drill with glue and insert it into the hole left by the nail according to the angle at which the nail entered the tire, so that the hole is well filled with the tire. glue and moisten its walls with it
3. insert the rope into the dot and cover the rope with glue
4. push the wing together with the rope into the pre-prepared hole
note: insert the rope so that the rope goes through the entire ply of the tire, but do not pull the entire rope into the tire
5. remove the wing and cut off the protruding ends of the rope with a knife
remember that this is a temporary solution and you should contact a tire repairer as rabbet as possible. do not use to repair side tire damage. the product is intended exclusively for the repair of tubeless tires.