infrastructural slot for charging, with actuator lock phoenix contact 1pc.

Available 1pc. charx connect modular, infrastructure charging socket, square, basic, set, with square protective cover, for charging electric vehicles (ev) with alternating current (ac), type 2, iec 62196-2, 32 a / 480 v (ac), without single-core wires, locking drive: 12 v, 4-pos., mounting on the back panel, m5 thread, body: black, phoenix contact

infrastructure charging sockets with protective cover for charging electric vehicles (ev) with alternating current (ac), compatible with type 2 infrastructure plugs. for installation in e-mobility (evse) charging stations

product family charx connect modular
application for charging electric vehicles (ev) with alternating current (ac)
compatible with infrastructure charging connectors
design (infrastructure loading slot) square
design (protective cover) square
design (protective cap) circular
type basic
rate
design with a square protective cover
Compatibility The square version of the main protective cover included in this kit is not compatible with the shutter. choose a premium and/or a set with a round protective cover.
verified logo phoenix contact logo
charging standard type 2
loading mode mode 3, case b
data management status
revision of the article 07

signal transmission type pulse width modulation
note on connection method connection via spade connection, detachable and re-connectable
charging current type ac 3-phase
charging power rating 22 kw
charging capacity max. 26.6 sq
charging current max. 32 years
power contact
number 5 (l1, l2, l3, n, pe)
nominal voltage 480 v ac
rated current 32 a
signal contact
number 2 (cp, pp)
nominal voltage 30 v ac
nominal current 2 a
locking drive
working voltage 12 v
note the number of positions 4-pos.
locking drive position top center
locking drive
working voltage 12 v
note the number of positions 4-pos.
locking drive position top center
possible motor power supply range 9 v ... 16 v
maximum voltage for lock detection 30 v
typical motor current for locking 0.2 a
motor reverse current max. 1 year
max delay time with reverse current 1000 ms
recommended adaptation time 600 ms
stop time after entry or exit path 3 s
service life entry cycles > 10000 charging cycles
lock detection done
mechanical emergency release available
ambient temperature (operation) -30 °c ... 50 °c
cable length 0.5 m
cable structure 4 x 0.5 mm²

infrastructure charging slot
dimensional drawing
width 75 mm
height 91.71 mm
depth 87.95 mm
protective cover
dimensional drawing
width 85 mm
height 93.7 mm
depth 32.5 mm
borehole dimensions
dimensional drawing
width 60 mm
height 60 mm
protective cap
width 64 mm
height 57 mm
depth 24 mm

color (body) black (9005)
color (protective cover) black (9005)
material (body) plastic
material (protective cover) plastic
material (contact surface) silver

cable type without single core wires
one wire, cross-section 6.00 mm²
single core wires for locking the actuator
cable length 0.5 m
cable construction 4 x 0.5 mm²
one wire, material pvc
single wire, colored bu/rd, bu/gn, bu/ye, bu/bn
outer cable diameter 1.60 mm ±0.20 mm
cable resistance ≤ 37.1 ω/m

cover movement type self-locking
mechanical data
insertion/withdrawal cycles > 10000
insertion force < 100 n
extraction force < 100 n

environmental conditions
degree of protection (infrastructure charging socket) ip44 (with socket)
degree of protection (protective coating) ip54
ambient temperature (operation) -30 °c ... 50 °c
ambient temperature (storage/transport) -40 °c ... 80 °c
altitude 5000 m (above sea level)

standards
standards/rules iec 62196-2

installation type infrastructure charging slot mounting on the back panel (possible front tilt angle from 0 to 90 degrees)
installation type protective cover attachment to the back panel
mounting hole diameter 7.00 mm (ø)
mounting screws with m5 thread
the screws included in the delivery set are missing

item number 1164417
packaging unit 1 pc
minimum order quantity 1 pc
product key xwadc
gtin 4063151176075
piece weight (including packaging) 541 g
piece weight (without packaging) 541.7

Delivery method