glue elastsetele for connections, 20ml, light brown

contact glue on one-component glue, which is based orgaanilistes lahustites lahustatud polükloropreenil. it is characterized by very strong nn "fast grip" võimaldab therefore elements fast ühendamist. this ühendab durable and flexible connection mitmesuguseid in household kasutatavaid materials and autotööstuse elemente, millega nad together puutuvad: vibration, for example car upholstery. due to sobivale viskoossusele saab it to use vertikaalsetel on surfaces (this no jookse alla). glue on durable for water and kõrgematele temperatuuridele, therefore saab it to use also wooden elements servade protection moisture eest. product Doesn't contain kahjulikku tolueeni and tsükloheksaani.
Features:
• flexible
• fast grip
• Waterproof
• no jookse vertikaalsetelt surfaces off
• durable muutuvatele temperatuuridele
• durable ilmastikutingimustele
• for use inside and outside
• Doesn't contain tolueeni neither tsükloheksaani

application
materials: leather, rubber, felt, wood, hard PVC, ABS, melamiin, textile, metals
Rakendusnäited:
• rubber seals kokkupanek
• helikindlate elements and akustiliste paneelide installation
• vineerribade liimimine puitlaastplaatide äärtele and kõveratele
• wooden elements and plywood protection moisture eest
• sticky autopolster
• carpets kleepimine
• polsterduskangaste sidumine different aluspindadega

surface making
glued surfaces peaksid be:
• clean
clean glued surfaces nii, et neil no oleks dirt neither saastumist (dust, grease). glued elements liimimistugevuse for repairing rub neid lightly sandpaper, then remove thoroughly from dust and wash technical rasvaärastusvahendiga 
• dry
dry cleaned surfaces.
TINGIMUSED
• dry and warm environment speeds up, at the same time kui low temperature slows down solvent evaporation (comfortable temperature on over 18oC)

use
1. Apply both surface glue and jagage this evenly.
o Apply glue lühikarvalise brush or hammaslabidaga.
2. wait solvents evaporation (at temperature 18 ° C - approximately 10 minutes)
o glue black be Touch dry.
o big pooridega or especially imavat material saab again with adhesive to cover (after esimese layer kuivatamist).
3. push glued elements heavily kinni
o connection quality määrab pressure, not time. Painduvaid osi saab koputada haamriga. bigger elements ühendamisel is recommended to use klambreid or presse (minimum pressure peaks be 0,5 N / mm2)
o after vajutamist pole parandamine any more possible.

advice and MÄRKUSED
• use product well ventilated place. Süttivus and big koguses lahustiaurude eraldumine piirab Product field of application
kohalikud and kohapealsed remonditööd. don't use vaipkatte . glue.
• wash tools and värskeid stains lahustiga, for example gasoline (before using) Check solvent effect aluspinnale).
• glue not suitable for PP, PE, teflonist and polüstüreenist elements for bonding. soft PVC and kunstnaha in gluing may to emerge deformatsioonid, therefore It is recommended teha test nähtamatus place.

Technical specifications
bottom: polükloropreenkumm + resin additive
synthetic
glue paint: merevaigukollane
Vuugivärv: merevaigukollane
Consistency: liquid
density: 0,89 g / cm3
open time: 10 min.
full kõvenemisaeg: 12 hours
temperature resistance: -30C up to  +80C
viscosity (25oC): 2400 mPas
consumption (ühekordse pealekandmisega): 200-300 g / m2

HOIUSTAMINE
• to keep densely CLOSED anumas at temperature 5 ° C up to 25 ° C.
• to protect moisture and from cold.
• glue you can to keep with other toodetega.
• Kõlblikkusaeg and tootepartii number, which paiknevad pipe paindel or It's end kleebisel.