IDEAL mikroprotsessoriga inverter poolautomaatne welding MIG/MAG, FLUX, MMA, TIG

Available 3pc. Mikroprotsessoriga controlled inverter poolautomaatne welding machine MIG-MAG, FLUX, MMA, TIG for welding and zinc plated leaves jootmiseks. Keevitusvool 250A. 230V Input. welding wire diameter 0,6-1,2 mm. 4 with roller traadisöötur. Sünergia.

SKU: EXMIG250PFC
EAN: 5903991100061
description
Technical specifications
Allalaaditavad failid
Technical kirjeldused
EXPERT MIG 250 4X4 PFC on inverteri sünergiline poolautomaatne welding machine, which is intended to kaarkeevitamiseks MIG / MAG, TIG LIFT, MMA and FLUX. device are created very erinevateks rakendusteks: starting from hooldusest up to car body remondini.

EXPERT MIG 250 is used zinc plated leaves kõvajoodisega for welding, stainless steel, carbon and with little alloyed steel and for aluminum for welding. Keevitamine happens inertgaasis, aktiivgaasis or segus and vastupidises polaarsuses without gaasita.

Keevitusparameetrite saving function eases different materjalidega work, without et peaksite gas and traati vahetades device lähtestama.

due to 4-rullilise traadisööturi kasutamisele black device very well effect 5 meters pikkuste keevitushoidikutega.

device is equipped with funktsioonidega: 2-positions, 4-positions and punktkeevitus. Meil on also possibility to adjust: keevitusinduktiivsus, keevituspinge korrigeerimine, gas before, gas after, wire läbipõlemine and soft starting.

device has by hand režiim and 21 sünergilist MIG / MAG programs with võimalusega to adjust:

gas before welding
gas after welding
wire instructions
wire läbipõlemine
punktkeevitusaeg
katkestused punktkeevitamisel

Füüsilised parameetrid
device has fan cooling system, which increases significantly It's efficacy.

device is equipped with overload-, over- and alapingekaitsega, et to work with generaatoriga (+/- 15%), which increases It's reliability.

PFC (Power Factor Correction) - suurenenud võimsustegur, 30% smaller Power consumption võrgust.

power parameetrid
one phase Input 230V.

device is equipped with toitepistikuga.

equipment
Tarne contains device, which has 3 meters long MIG 24 keevituspüstol and 3 meters long maandusjuhe.

FÜÜSIKALISED PARAMETRID
Traatpooli dimensions 15 kg
Kaitseaste IP 23
Device / set weight 27/32 kg
Üldmõõtmed length x width x height 760x320x580 mm
Technical KIRJELDUSED
Power 7,8 kW
maximum current 250 A.
current tööl 100% 195 A.
current tööl 60% 250 A
Alumiiniumtraadi diameter 1,0 - 1,2 mm
Jootetraadi diameter 0,8 mm
Isekindla wire diameter on 0,8 - 1,2 mm
steel wire diameter 0,6 - 1,2 mm
stainless steel wire diameter 0,6 - 1,2 mm
Keevituselektroodi diameter 1,6 - 6 mm
Keevitusvoolu reguleerimisetapid Reguleerimata
Keevitusvoolu adjustment range 40–250 A (MIG / MAG) / 10–250 A (MMA / TIG)
VÕIMU PARAMETRID
25 A protection against Electric surchages
Nimipinge 230 V; 50Hz (1ph)