inverter poolautomaatne welding mig/mag, min current when welding: 30A, max current when welding: 280A, Power: 10,2kW, voltage Power: 400V, przystosowany when welding aluminium, synergia

Goods available only in e-shop

1 129,80€
Delivery: home 3-4wd
ADD TO BASKET
Products ID: 723960
Partnumber: TMIG285P
Available 1pc. Sünergiline inverter-poolautomaatne welding machine, which is intended to for aluminum and It's sulamite, stainless steel, carbon- and vähelegeeritud steel for welding and zinc plated leaves kõvajoodisega for welding. Keevitusvool 30-280 A.
Input 400V. welding wire diameter 0,8-1,2mm. 4-rulliline traadisöötur.

TECNOMIG 285 PULSE SYNERGIC on inverter-sünergiline poolautomaatne keevitusmasin, which is intended for zinc plated leaves MIG/MAG and MMA kaarkeevituseks and kõvajoodisjootmiseks. device is intended for professional and industrial for use.

device has three MIG / MAG keevitusrežiimi: MANUAL MIG, PULSE MIG, DUAL PULSE MIG.

TECNOMIG 285 PULSE SYNERGIC is used for aluminum and It's sulamite, stainless steel, carbon- and vähelegeeritud steel for welding and zinc plated leaves kõvajoodisjootmiseks. Keevitamine happens inertgaasis, aktiivgaasis or segus, depending on juhtpaneelil chosen programmist.

due to MIG-pulsatsiooni kasutamisele increases welded for element controlled soojushulk. not depending on keevitusasendist is possible saada right keevisõmblus and to reduce splashes quantity.

Nii MIG and also MIG PULS meetodi puhul on meil possibility valida inside handle oleva knob functions SPOT mode (punktkeevitus), 2-stepped, S4-stepped (pühendatud for aluminum for welding), 4-stepped (nupulukk) vahel. long keevisõmbluste .),

clear and easy to use digital Control panel võimaldab exactly to adjust keevitusparameetreid, for example:

keevituseelne gaasivoolu aja adjusting
keevitusvoolu / baasvoolu adjusting two impulsiga
induktiivsuse adjusting
Sisendvoolu control S4-sammul
topeltimpulsi tippvoolu adjusting
tasakaalu adjusting topeltimpulsiga
impulsi sageduse adjusting topeltimpulsiga
punktkeevitusaja control
keevitusjärgne tagasipõlemisaeg and voltage control
keevitusjärgne gaasivoolu aja adjusting


Füüsikalised parameetrid
device has ventilaatorjahutussüsteem, which increases significantly It's efficacy.

device is equipped with ülekoormuskaitsega, which increases It's reliability.

power parameetrid
Kolmefaasiline toiteallikas 3x400V

device is equipped with sockets.

equipment
Tarne contains device with professionaalse MIG 25 keevitushoidikuga length 3 meters relvastatud aluminum, elektroodikaablit length 3 meters, maanduskaablit length 3 meters, rollers sööturile 1,0-1,2 . aluminium and 0,8-1, 0 steel.


FÜÜSIKALISED PARAMEETRID
Traadipooli dimensions 15 kg
Kaitseaste IP 21S
Device/set weight 46/48 kg
Üldmõõtmed length x width x height 900x320x720 mm
Technical KIRJELDUSED
Power 10,2 kW
Tühikäigupinge 75 V
maximum current 280 A.
power tööl 100% 220 A.
power tööl 60% 280 A.
Alumiiniumtraadi diameter 0,8 - 1,2 mm
Jootetraadi diameter 0,8 mm
Isevarjestava wire diameter on 0,8 - 1,2 mm
steel wire diameter 0,8 - 1,2 mm
stainless steel wire diameter 0,8 - 1,2 mm
Keevituselektroodi diameter 1,6 - 4,0 mm
Keevitusvoolu adjustment range 30 - 280 A
power PARAMEETRID
C20A protection against Electric surchages
power supply nimipinge 3x400 V; 50 Hz (3 Phase)