semi-automatic welding mig/mag, min welding current: 30a, max welding current: 200a, power name: 6.2kw, voltage: 230v, welding method: flux / mig-mag / mma

Professional inverter welding semi-automatic device for MIG-MAG welding, FLUX welding without shielding gas with welding wire and MMA welding with coated electrode. Welding current 200A Power supply 230V. Welding wire diameter 0.6-1.0mm.

Technical parameters
PRAKTIK MIG 211 MMA DIGITAL is an inverter semi-automatic welding device designed for arc welding using MIG/MAG, MMA and FLUX methods. The device is designed for very different applications: from maintenance work to car body repair.

PRAKTIK MIG 211 is used for welding carbon and low-alloy steels and aluminum. Welding is carried out in the shield with inert gas, active gas or a mixture, and with opposite polarity without gas.

The device is equipped with inductance adjustment.

Physical parameters
The device has a fan cooling system, which significantly increases its efficiency.

The device is equipped with overload protection, which increases its reliability.

Power parameters
Single-phase 230V power supply.

The device is equipped with a plug.

Equipment
The delivery includes the device with a 3-meter welding torch MIG 15, a 2-meter ground cable and a 2-meter electrode cable.

Mains protection C20A
Nominal supply voltage 230V; 50Hz (1ph)
Power 6.2 kW
Open circuit voltage 43V
Operating current 100% 130 A
Operating current 60% 200 A (MIG) / 180 A (MMA)
Aluminum wire diameter 0.8 - 1.0 mm
The diameter of the self-shielding wire is 0.8 - 1.2 mm
Steel wire diameter 0.6 - 1.0 mm
Stainless steel wire diameter 0.6 - 1.0 mm
The diameter of the welding electrode is 1.6 - 4.0 mm
Welding current adjustment range 30-200 A (MIG) / 30-180 A (MMA)
Wire spool size D100 (0.45 kg and 1 kg), D200 (2 kg and 5 kg)
Security level IP 21S