semi-automatic welding practitioner mig 200 synergic
Goods available only in e-shop
365,70€
Delivery: home 3-4wd
ADD TO BASKET
Available 1pc. Inverter semi-automatic welding device for MIG-MAG, MMA and FLUX welding. Welding current 200A. Power supply 230V. The diameter of the welding wire is 0.6-0.8mm. 2-roll wire feeder
Technical parameters
PRAKTIK MIG 200 SYNERGIC is a synergic inverter semi-automatic welding device designed for arc welding using MIG/MAG, TIG LIFT, FLUX and MMA methods. The device is designed for very different applications: from maintenance work to car body repair.
PRAKTIK MIG 200 SYNERGIC is used for welding carbon and low-alloy steels and aluminum. Welding is carried out in the shield with inert gas, active gas or a mixture, and with opposite polarity without gas.
A clear and easy-to-use control panel allows you to choose one of three synergistic programs:
CO 2 / 0.8
Ar+CO 2 / 0.8
FLUX
The device is equipped with inductance adjustment.
Physical parameters
The device has a fan cooling system, which significantly increases its efficiency.
The device is equipped with overload protection, which increases its reliability.
Power parameters
Single-phase 230V power supply.
The device is equipped with a plug.
Equipment
The delivery includes a device with a direct MIG welding torch, a 2-meter ground cable and a 2-meter electrode cable.
Mains protection C25A
Nominal supply voltage 230V; 50Hz (1ph)
Power 5.5 kW
Open circuit voltage 43 May
Operating current 100% 130 A
Operating current 60% 200 A (MIG) / 180 A (MMA)
The diameter of the self-shielding wire is 0.8 - 0.9
Steel wire diameter 0.6 - 0.8
Stainless steel wire diameter 0.6 - 0.8
Welding electrode diameter 1.6 - 4.0
Welding current adjustment range 30-200 A
Wire coil size 5 kg
Security level IP21S
Weights 15 kg
Overall dimensions: length x width x height 470x225x335 mm
Package dimensions: length x width x height 570x245x355 mm
Technical parameters
PRAKTIK MIG 200 SYNERGIC is a synergic inverter semi-automatic welding device designed for arc welding using MIG/MAG, TIG LIFT, FLUX and MMA methods. The device is designed for very different applications: from maintenance work to car body repair.
PRAKTIK MIG 200 SYNERGIC is used for welding carbon and low-alloy steels and aluminum. Welding is carried out in the shield with inert gas, active gas or a mixture, and with opposite polarity without gas.
A clear and easy-to-use control panel allows you to choose one of three synergistic programs:
CO 2 / 0.8
Ar+CO 2 / 0.8
FLUX
The device is equipped with inductance adjustment.
Physical parameters
The device has a fan cooling system, which significantly increases its efficiency.
The device is equipped with overload protection, which increases its reliability.
Power parameters
Single-phase 230V power supply.
The device is equipped with a plug.
Equipment
The delivery includes a device with a direct MIG welding torch, a 2-meter ground cable and a 2-meter electrode cable.
Mains protection C25A
Nominal supply voltage 230V; 50Hz (1ph)
Power 5.5 kW
Open circuit voltage 43 May
Operating current 100% 130 A
Operating current 60% 200 A (MIG) / 180 A (MMA)
The diameter of the self-shielding wire is 0.8 - 0.9
Steel wire diameter 0.6 - 0.8
Stainless steel wire diameter 0.6 - 0.8
Welding electrode diameter 1.6 - 4.0
Welding current adjustment range 30-200 A
Wire coil size 5 kg
Security level IP21S
Weights 15 kg
Overall dimensions: length x width x height 470x225x335 mm
Package dimensions: length x width x height 570x245x355 mm
737,80€
ADD TO BASKET
Delivery: home 3-4wd
854,00€
ADD TO BASKET
Delivery: home 3-4wd
1 658,10€
ADD TO BASKET
Delivery: home 3-4wd
640,00€
735,60€
-13%
ADD TO BASKET
Delivery: home 3-4wd
201,10€
ADD TO BASKET
Delivery: home 3-4wd
468,40€
ADD TO BASKET
Delivery: home 3-4wd
308,10€
ADD TO BASKET
Delivery: home 3-4wd
714,50€
ADD TO BASKET
Delivery: home 3-4wd
737,80€
ADD TO BASKET
Delivery: home 3-4wd
854,00€
ADD TO BASKET
Delivery: home 3-4wd
1 658,10€
ADD TO BASKET
Delivery: home 3-4wd