semi-automatic welding tecno mig 202 led mig/tig/mma synergic

Available 1pc. Microprocessor controlled inverter semi-automatic welding machine for MIG-MAG, brazing, FLUX, TIG Lift and MMA welding. Welding current 200A (TIG/MIG), 160A (MMA). Power supply 230V. Welding wire diameter. 0.6-1.0 mm. 2-roll wire feeder. Synergy


Technical parameters
TECNOMIG 202 LED is an inverter synergic semi-automatic welding machine designed for arc welding using MIG/MAG, TIG LIFT, MMA and FLUX methods. The device is designed for very different applications: from maintenance work to car body repair.

TECNOMIG 202 is used for welding galvanized sheets, stainless steel, carbon and low alloy steel and aluminum. Welding is carried out in the shield with inert gas, active gas or a mixture, and with opposite polarity without gas.

With the MIG/MAG method, we can choose between the operation of the button function in the handle in 2T mode (without button lock)/4T (button lock for long welds)

The clear LED display allows precise adjustment of the device even in very strong lighting.

With the MMA method, it is possible to turn on the VRD (VOLTAGE REDUCTION Device) function - it reduces the no-load voltage on the electrode to a safe value. Provides protection against electric shock when working in a humid environment.

Physical parameters
The device has a fan cooling system, which significantly increases its efficiency.

The device is equipped with overload protection, which increases its reliability.

Power parameters
Single-phase power supply.

The device is equipped with a plug.

Equipment
The delivery includes the device with a 3-meter welding torch MIG 15, a 2.5-meter ground cable and a 2.5-meter electrode cable.


The current is taken from the network 34A
Mains protection 25 A slow blow (type C)
Nominal supply voltage 230V; 50Hz (1ph)
Power 6.2 kW
Open circuit voltage 74 May
Maximum current 200 A - 60%
Operating current 100% 155 A (MIG/TIG) / 124 A (MMA)
Operating current 60% 200 A (MIG/TIG) / 160 A (MMA)
Aluminum wire diameter 0.8 - 1.0 mm
Solder wire diameter 0.8 mm
The diameter of the self-shielding wire is 0.8 - 1.0 mm
Steel wire diameter 0.6 - 1.0 mm
Stainless steel wire diameter 0.6 - 1.0 mm
The diameter of the welding electrode is 1.6 - 4.0 mm
Welding current adjustment range 50-200 A (MIG) / 10-160 A (MMA) / 10-200 A (TIG)
Wire spool size D200 (2kg and 5kg)
Security level IP21S
Weight of the device/set 10/14 kg
Overall dimensions: length x width x height 455x170x300 mm
Package dimensions: length x width x height 500x280x330 mm