Welding device easymig 160 digital 3 in 1 very light 10kg + accessories

Available 1pc. EASYMIG 160
EASYMIG 160 is a semi-automatic welding device that combines MIG/MAG, flux-cored wire and
MMA welding processes. Thanks to its user-friendly interface and digital display, there is tension
and wire feed speed settings are quick and easy to set and adjust. Its ultra-lightweight design makes it so
extremely easy to move around the workplace. EASYMIG 160 is recommended for welding steel,
stainless steel and aluminum.
- EN 60974-1

EASYMIG 160 is a semi-automatic welding machine that combines MIG/MAG, flux-cored wire and MMA welding processes. Thanks to the user-friendly interface and digital display, the voltage and wire feed speed settings are quick and easy to set and adjust. Its ultra-lightweight design makes it extremely easy to move around the job site. EASYMIG 160 is recommended for welding steel, stainless steel and aluminium.

Extremely light and portable
• Weighs 10.1 kg
• Ergonomic handle

Integrated wire feeder
• ø 100 (1 kg) wire rolls
• ø 200 (5 kg) wire rolls
• Two-roll wire feed motor
• Included rolls:
Steel: 0.8
Without gas: 0.9

MIG/MAG torch
• Supplied with detachable flashlight (150 A - 2.20 m)
working with steel
• EURO flashlight for quick assembly/disassembly

Includes
• Ground clamp
(cable 1.6 m / 16 mm²)
• Electrode holder
(cable 1.6 m / 16 mm²)

Features NO GAS, ready to weld
EASYMIG 160 is a semi-automatic welding machine that combines MIG/MAG, flux-cored wire and MMA welding processes. Thanks to the user-friendly interface and digital display, the voltage and wire feed speed settings are quick and easy to set and adjust. Its ultra-lightweight design makes it extremely easy to move around the job site. EASYMIG 160 is recommended for welding steel, stainless steel and aluminium.

• Accessory box
- Contact tip (0.9 mm)
- Gas nozzle
- Contact end wrench
- Gas pipe (1 m)
- Gas pipe clamp (x2)

GAS NOT ready for welding
This process enables:
• Welding with flux-cored wire (requires polarity reversal).
• Enables welding in outdoor conditions (wind does not affect).
• Greater portability due to the absence of gas cylinders.
• Ideal for outdoor work on thin metal sheets.

Easy to set up
1. Adjust arc dynamics manually (MIG/MAG)
2. Select a wire feed speed between 3 and 10 m/min (MIG/MAG)
Select electrode (MMA)
3. Set the voltage between 15-22 V (MIG/MAG)

Simplified display
Two color LEDs:
• Thermal protection warning LED
• Power On LED

MIG/MAG - MMA
• Wire diameter
Ø 0.6 mm - 0.8 mm
• Electrode
Ø 1.6 mm - 3.2 mm

Polarity reversal cable
• For gasless welding.
230V
40x20x33

Made in China
Additional information