welding device manual digital modular 400 xt

Available 1pc. Manual welding device designed for welding low carbon steel, stainless steel and galvanized sheets with a maximum thickness of 2+2 mm. Power supply 400V, maximum power 13kW. Continuous and impulse work (for flexible sheets), choice of welding thickness

Manual welding device designed for welding low carbon steel, stainless steel and galvanized sheets with a maximum thickness of 2+2 mm.

Two-phase power supply.

Designed primarily for car body repair.

Microprocessor control.

All welding settings are available from the control panel.

Automatic setting of welding time and current depending on the thickness of the welded material.

Ability to manually set the time and thickness of the welded sheets.

Choice between continuous and pulse mode (for flexible sheets, with galvanized, oxidized coating or color traces).

Arm pressure adjustable from 40 to 120 kg (handle L = 120 mm).

The handle is made of heat insulating material.

Overload protection.

Equipped with a set of shoulders and electrodes L=120mm.

Power supply protection 16A
Nominal supply voltage 400V; 50Hz (2ph)
Power 13 kW
Rated power 2.3 kW 50%
Security level IP 20
Weight 10.3 kg
Overall dimensions: length x width x height 440x100x185 mm
Duty cycle 1.5%
Open secondary voltage 2.5V
Maximum sheet thickness for double-sided welding 2 + 2 mm
Maximum welding current 6300A