Welding device mma mig mag multiweld fv 220m-c with accessories
Goods available only in e-shop
1 191,60€
Delivery: home 3-4wd
ADD TO BASKET
Available 1pc. MULTIWELD FV 220M-C
- EN 60974-1
MULTIWELD 220M-C is a compact single-phase welding machine that combines MIG/MAG, core wire and MMA welding processes. Thanks to the FV (flexible folds) power supply, it operates on a supply voltage between 85 and 265 V. With a precise 4-roll wire feed system and a reinforced construction with 2 handles for lifting and slinging, it is ideal for welding in the workshop and for quick troubleshooting on site.
MIG/MAG welding:
- steel wire: Ø 0.6 to 1.0 mm
- stainless steel wire: Ø 0.8 to 1.0 mm
- aluminum wire: Ø 0.8 and 1.0 mm
- core wire (opposite polarity): Ø 0.9 to 1.2 mm
MMA welding: basic and rutile electrodes (up to Ø 5 mm).
IP 23 classification for outdoor use.
Suitable for very long extension cords (100 m).
2 steel handles for easy handling.
Protected against overvoltage up to 400 V (PROTEC 400).
INTUITIVE
The display is readable even in bright light.
Simple user interface with ergonomic controls that allow the use of gloves.
Trigger mode selection: 2T or 4T.
Welding Guide: The tables help the user to adjust and fine-tune the voltage and filler wire diameter according to the thickness of the material to be welded.
INTEGRATED wire feeder
Compatible with rollers: Ø 200 / 300 mm
Wire feeder with 4 rollers for efficient wire feeding.
EURO burner connector for quick assembly/disassembly.
PRECOATING, PURE CO2
Pre-installed socket (36 V - 4.2 A) for gas heater in pure CO2 welding
(the heater is not included).
Compatible with US (Type A) and EURO electrical outlets (Type C/E/F).
In the set MIG25 - 3 m
Additional information
- EN 60974-1
MULTIWELD 220M-C is a compact single-phase welding machine that combines MIG/MAG, core wire and MMA welding processes. Thanks to the FV (flexible folds) power supply, it operates on a supply voltage between 85 and 265 V. With a precise 4-roll wire feed system and a reinforced construction with 2 handles for lifting and slinging, it is ideal for welding in the workshop and for quick troubleshooting on site.
MIG/MAG welding:
- steel wire: Ø 0.6 to 1.0 mm
- stainless steel wire: Ø 0.8 to 1.0 mm
- aluminum wire: Ø 0.8 and 1.0 mm
- core wire (opposite polarity): Ø 0.9 to 1.2 mm
MMA welding: basic and rutile electrodes (up to Ø 5 mm).
IP 23 classification for outdoor use.
Suitable for very long extension cords (100 m).
2 steel handles for easy handling.
Protected against overvoltage up to 400 V (PROTEC 400).
INTUITIVE
The display is readable even in bright light.
Simple user interface with ergonomic controls that allow the use of gloves.
Trigger mode selection: 2T or 4T.
Welding Guide: The tables help the user to adjust and fine-tune the voltage and filler wire diameter according to the thickness of the material to be welded.
INTEGRATED wire feeder
Compatible with rollers: Ø 200 / 300 mm
Wire feeder with 4 rollers for efficient wire feeding.
EURO burner connector for quick assembly/disassembly.
PRECOATING, PURE CO2
Pre-installed socket (36 V - 4.2 A) for gas heater in pure CO2 welding
(the heater is not included).
Compatible with US (Type A) and EURO electrical outlets (Type C/E/F).
In the set MIG25 - 3 m
Additional information
854,00€
ADD TO BASKET
Delivery: home 3-4wd
1 658,10€
ADD TO BASKET
Delivery: home 3-4wd
640,00€
735,60€
-13%
ADD TO BASKET
Delivery: home 3-4wd
201,10€
ADD TO BASKET
Delivery: home 3-4wd
468,40€
ADD TO BASKET
Delivery: home 3-4wd
308,10€
ADD TO BASKET
Delivery: home 3-4wd
767,90€
ADD TO BASKET
Delivery: home 7-9wd
854,00€
ADD TO BASKET
Delivery: home 3-4wd
1 658,10€
ADD TO BASKET
Delivery: home 3-4wd