Tec2000 diesel injector cleaner 375ml additive for cleaning injectors

TEC 2000 Diesel Injector Cleaner is a special preparation that is used for thorough cleaning of both the injector tips and the entire injector nozzles. It is characterized by high power and efficiency (the presence of many strong lubricants in the composition). TEC 2000 Diesel Injector Cleaner is a product designed for maintenance of diesel engine injectors. Thanks to its innovative formula, it is perfect for removing contaminants from poor quality fuels , as well as other contaminants that accumulate in injector nozzles, including carbon deposits. Regular use of the product protects the injectors from both overflowing fuel and complete clogging and thus costly repairs. TEC 2000 Diesel Injector Cleaner has been tested by several independent agencies, who have confirmed its effectiveness and properties in reducing harmful emissions . The product reduces black smoke from exhaust gases. The product is available in a jar with a volume of 375 ml. The product is recommended for use both in professional car workshops and at home.
use the TEC2000 8mm kit in addition. Product ID 1180092

STEP 01
Disconnect the supply and return fuel lines from the strip

02. STEP
Instead of the factory hoses, connect the injector cleaning machine maintenance prepositions and place the free ends in the can with TEC 2000 diesel injection cleaner

STEP 03
Start the engine, from now on let the engine run on the TEC 2000 DIC, one can or 375 ml is enough for about 20 minutes of work.

STEP 04
When the can is empty, turn off the engine

STEP 05
Disconnecting service cables

STEP 06
Connect the factory wires
Note 1: However, if the effect is partial or if the nozzles are particularly heavily contaminated, it is recommended to repeat the entire operation. Note 2: If none of the above options can be applied, insert the end of the suction tube from the vehicle's fuel pump into the can of TEC 2000 Diesel Injector Cleaner, while the "return to tank" tube should also be inserted into the can. The motor should run until the can is almost empty. For better results on high mileage engines, we recommend extending the procedure for an additional 20 minutes with an additional 375ml can of TEC 2000 Diesel Injection Cleaner.

STEP 07
Run the engine at idle for about 20 minutes.