electric main switch 12v 139x96x52mm
$320,90
$385,10
-17%
Arrives in 4-5wd
ADD TO BASKET
manual control option, led indicator light, 2x10mm bolt, similar to 1790-7702, but standard is/has a switch instead of a pulse switch. 500a, ip66, (switch 2155)
139x96x52mm
ml-rbs remote control battery switch with manual control automatic release - 12v
7713
500A magnetic latching switch provides high current switching under load, manually or from remote locations
a manual override button provides an additional level of security, allowing control with or without power and providing a locked off option for maintenance
led output for remote indication of switch status - requires optional led
3∕ 8"-16 tin plated copper bolts for maximum conductivity and corrosion resistance
7∕ 8" (22mm) pin length fits multiple cable terminals
marking pits for circuit identification
silver alloy contacts ensure high reliability when switching live loads
auto release ml series remote battery switch with spst switching offers 500a switching and features of current ml remote battery switches but can be operated with spst or spdt switch for applications where normally open relay is desired
technical data
control circuit voltage 10.1 to 16.5 v dc
control circuit connectiontinned wires
- available on retail units
deutsch dtm / amphenol atm
- supplied on bulk supplies tinned wire
nominal voltage 12v dc
coil function automatic release provides 500A switching and features of current ml remote battery switches, but can be controlled with a spst or spdt switch for applications where normally open relays are desired. automatic release
installation #10
ampere operating current 8ma when off
13th if it is
amperage operating current when changing state <7a (40 ms)
terminal stud torque 140 in (15.82 Nm)
the maximum current of a continuous rating switch is designed to control for an indefinite period of time. 500 years
intermittent rated maximum current that the switch must carry for a minimum specified period of time. 700a (5 min)
cranking speed is commonly associated with cranking current, which is the current required by the starter circuit before starting the engine. the starting current varies significantly during the starting cycle. initially, a large current increase is required to overcome motor inertia and compression. this surge can be two to four times the average cranking current. as the engine rotates, the pistons experience peaks and valleys as they go through the compression and exhaust cycles. the operating current rating is used to size batteries, cables and battery switches. 1450 AD
minimum working temperature -10°c
maximum working temperature 60°c
cable size meets ratings 2x (4/0)
direct current switching 300a @ 12v dc10,000 cycles
master control switch option yes
mechanical durability 100,000 cycles
terminal ring diameter clearance 1.18 in. (29.97 mm)
terminal pin length 0.875 inch (22.23 mm)
terminal pin size 3/8" - 16 (m10)
weight 2.07 lb (0.94 kg)
blue sea systems was founded in 1992 with a commitment to create innovative, high quality marine electronics products to improve the safety, ease and reliability of boating. blue sea systems employees are active boaters who apply their passion to designing, developing and building products that enhance the boating experience www.bluesea.com
blue sea systems is a recognized leader in the design and manufacture of marine and specialty vehicle electrical systems, including circuit protection, battery switches, busbars, power distribution panels and battery chargers.
www.bluesea.com
139x96x52mm
ml-rbs remote control battery switch with manual control automatic release - 12v
7713
500A magnetic latching switch provides high current switching under load, manually or from remote locations
a manual override button provides an additional level of security, allowing control with or without power and providing a locked off option for maintenance
led output for remote indication of switch status - requires optional led
3∕ 8"-16 tin plated copper bolts for maximum conductivity and corrosion resistance
7∕ 8" (22mm) pin length fits multiple cable terminals
marking pits for circuit identification
silver alloy contacts ensure high reliability when switching live loads
auto release ml series remote battery switch with spst switching offers 500a switching and features of current ml remote battery switches but can be operated with spst or spdt switch for applications where normally open relay is desired
technical data
control circuit voltage 10.1 to 16.5 v dc
control circuit connectiontinned wires
- available on retail units
deutsch dtm / amphenol atm
- supplied on bulk supplies tinned wire
nominal voltage 12v dc
coil function automatic release provides 500A switching and features of current ml remote battery switches, but can be controlled with a spst or spdt switch for applications where normally open relays are desired. automatic release
installation #10
ampere operating current 8ma when off
13th if it is
amperage operating current when changing state <7a (40 ms)
terminal stud torque 140 in (15.82 Nm)
the maximum current of a continuous rating switch is designed to control for an indefinite period of time. 500 years
intermittent rated maximum current that the switch must carry for a minimum specified period of time. 700a (5 min)
cranking speed is commonly associated with cranking current, which is the current required by the starter circuit before starting the engine. the starting current varies significantly during the starting cycle. initially, a large current increase is required to overcome motor inertia and compression. this surge can be two to four times the average cranking current. as the engine rotates, the pistons experience peaks and valleys as they go through the compression and exhaust cycles. the operating current rating is used to size batteries, cables and battery switches. 1450 AD
minimum working temperature -10°c
maximum working temperature 60°c
cable size meets ratings 2x (4/0)
direct current switching 300a @ 12v dc10,000 cycles
master control switch option yes
mechanical durability 100,000 cycles
terminal ring diameter clearance 1.18 in. (29.97 mm)
terminal pin length 0.875 inch (22.23 mm)
terminal pin size 3/8" - 16 (m10)
weight 2.07 lb (0.94 kg)
Blue Sea
blue sea systems was founded in 1992 with a commitment to create innovative, high quality marine electronics products to improve the safety, ease and reliability of boating. blue sea systems employees are active boaters who apply their passion to designing, developing and building products that enhance the boating experience www.bluesea.com
blue sea systems is a recognized leader in the design and manufacture of marine and specialty vehicle electrical systems, including circuit protection, battery switches, busbars, power distribution panels and battery chargers.
www.bluesea.com
Delivery method
DHL Express
Fast Delivery (Shipping discount for order starting from 700 € or $)
Fast Delivery (Shipping discount for order starting from 700 € or $)
$29,00
Delivery date 2025-06-13
Postal office
To the nearest Postal office
To the nearest Postal office
$18,40
Delivery date 2025-06-25
To nearest Postal office
Economy (Max 2kg ,60cm)
Economy (Max 2kg ,60cm)
$8,70
Delivery date 2025-06-25
Courier International
To Home or Office (Shipping discount for order starting from 700 € or $)
To Home or Office (Shipping discount for order starting from 700 € or $)
$38,90
Delivery date 2025-06-25
$40,20
ADD TO BASKET
Arrives in 3-4wd
$89,70
$104,90
-15%
ADD TO BASKET
Arrives in 3-4wd
Car Electrical System: Overview, Components, and Maintenance
The car's electrical system is one of the most complex and important parts of a modern vehicle, responsible for starting the engine, lighting, and many other functions. The smooth operation of the electrical system ensures the vehicle's performance, safety, and comfort. Knowing this system helps you understand how the different parts of the car work and how to prevent or solve potential problems.
Basic functions of a car's electrical system
Energy generation and storage:
... More...
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
