thread tap
Goods available only in e-shop
Previous 1 2 3 ... 9 10 11 12 Next
length: 20/125mm, 35° right hand spiral flutes for bottoming, G: cylindrical pipe thread DIN228, Rp: Whitworth pipe thread DIN2999, thread angle 60°, 11 threads/inch, overflow shank, core hole ø19mm. DIN5156, ground, high speed steel w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for steel 1000N/mm², stainless steel and brass, also for cast ir...
60,60€
78,40€
-23%
ADD TO BASKET
Available 1pc.
60,90€
64,80€
-7%
ADD TO BASKET
length: 25/140mm, for bottoming, overflow shank, C: 35° right-hand spiral flutes, 2-3 threads chamfer, DIN ISO 13, thread angle 60°, thread core hole ø19.5mm, tolerance ISO2 6H. DIN371, ground, cobalt alloyed (5%) and vaporised heavy-duty high-speed steel, max. 1000N/mm², thread is cut in one operation, vaporisation: evaporation of a non-metallic oxide film, acts as a separating layer and reduces ...
65,20€
84,30€
-23%
ADD TO BASKET
length: 20/120mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø16.5mm. DIN374, ground, high speed steel w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for steel 1000N/mm², stainless steel and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H HSSE Co5...
66,00€
85,30€
-23%
ADD TO BASKET
length: 20/120mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø17mm. DIN374, ground, high speed steel w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for steel 1000N/mm², stainless steel and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H HSSE Co5 M...
66,00€
85,30€
-23%
ADD TO BASKET
length: 20/125mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø16mm. DIN374, ground, high speed steel w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for steel 1000N/mm², stainless steel and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H HSSE Co5 M...
66,00€
85,30€
-23%
ADD TO BASKET
Available 1pc.
66,50€
127,50€
-48%
ADD TO BASKET
Available 1pc.
68,30€
72,60€
-6%
ADD TO BASKET
length: 30/140mm, for through threads, DIN ISO 13, thread angle 60°, B: 4-5 threads chamfer, overflow shank, progressive tap, thread core hole ø17.5mm, tolerance ISO2 6H. DIN371, ground, high speed steel with 5% cobalt content, max. 1000N/mm² HSSE Co5 M20x2.5
68,30€
88,30€
-23%
ADD TO BASKET
Available 2pc.
69,10€
73,60€
-7%
ADD TO BASKET
Available 2pc.
69,10€
73,60€
-7%
ADD TO BASKET
length: 30/160mm, for bottoming, overflow shank, C: 35° right-hand spiral flutes, 2-3 threads chamfer, DIN ISO 13, thread angle 60°, thread core hole ø21mm, tolerance ISO2 6H HSSE Co5 DIN371, ground, high speed steel with 5% cobalt content, max. 1000N/mm² M24x3.0
71,20€
93,30€
-24%
ADD TO BASKET
length: 20/125mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø18.5mm. DIN374, ground, high speed steel w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for steel 1000N/mm², stainless steel and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H HSSE Co5...
74,20€
97,20€
-24%
ADD TO BASKET
length: 20/125mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø19mm. DIN374, ground, high speed steel w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for steel 1000N/mm², stainless steel and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H HSSE Co5 M...
74,20€
97,20€
-24%
ADD TO BASKET
length: 20/140mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø18mm. DIN374, ground, high speed steel w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for steel 1000N/mm², stainless steel and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H HSSE Co5 M...
74,20€
97,20€
-24%
ADD TO BASKET
Available 1pc.
74,80€
79,50€
-6%
ADD TO BASKET
Available 1pc. excellently virnastatavad integraallukustusega ülitugevad joints DIN 352 tolerants according to standard ISO 2/6H to the right cutting contains on pre-, center- and järellõikurid läbivale and mitteläbivale for thread from behind grinded with teeth not coated pealispind powerful kiirteras 1 pre-, center- and järellõikur koon spaces paint: silver Materjal1: high-quality kiirteras Packing width mm: ...
76,90€
ADD TO BASKET
3pc set: taper tap (6-8 thread chamfer) - second tap (4-5 thread chamfer) - final tap (2-3 thread chamfer), length: 40/95mm, thread angle 60°, core hole ø15.5mm, tolerance ISO2 6H HSS DIN352, ground, high speed steel, max 800N/mm² M18x2.5
77,20€
101,20€
-24%
ADD TO BASKET
Available 1pc. M14 x 1,5 and M16 x 1,5
77,40€
ADD TO BASKET
80,30€
83,60€
-4%
ADD TO BASKET
Available 1pc.
80,50€
85,60€
-6%
ADD TO BASKET
3pc set: taper tap (6-8 thread chamfer) - second tap (4-5 thread chamfer) - final tap (2-3 thread chamfer), length: 40/95mm, thread angle 60°, core hole ø17.5mm, tolerance ISO2 6H HSS DIN352, ground, high speed steel, max 800N/mm² M20x2.5
81,00€
106,20€
-24%
ADD TO BASKET
2pcs HSS-G DIN2181 Mf26x2.0
81,00€
106,20€
-24%
ADD TO BASKET
G1/2"x14, length: 18/125mm, for blind holes spiral flute 45°,max depth 2.5 x ø, C chamfer: 2-3 teeth, DIN 5156 HSS-E PM HSS-E PM: powder metallurgy steel, steam tempered G1/2"x14
87,80€
115,10€
-24%
ADD TO BASKET
length: 22/140mm, 35° right hand spiral flutes for bottoming, G: cylindrical pipe thread DIN228, Rp: Whitworth pipe thread DIN2999, thread angle 60°, 11 threads/inch, overflow shank, core hole ø24.5mm. DIN5156, ground, high speed steel w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for steel 1000N/mm², stainless steel and brass, also for cast ...
89,40€
117,10€
-24%
ADD TO BASKET
Available 1pc. High strength hingeDIN 352Tolerance according to ISO 2 / 6HRight hand cuttingIncludes second and bottom tapFor running and blind hole threadsWith hard metal centreSurface without discolourationHigh performance high speed steelEach size includes 1x second and bottom tapIdeally usably in high and low alloyed steel up to 800 N/mm² stability, cast iron and NE metals. Technical Dataweight in g: 620gMai...
93,80€
ADD TO BASKET
Available 2pc.
104,60€
111,30€
-7%
ADD TO BASKET
Available 1pc. DIN 352Tolerance according to ISO 2 / 6HRight hand cuttingIncludes second and bottom tapFor running and blind hole threadsWith hard metal centre Surface without discolourationHigh performance high speed steelIdeally usably in high and low alloyed steel up to 800 N/mm² stability, cast iron and NE metals. Technical Dataindividual second tap: 331.0338individual bottom tap: 331.0358individual taper ta...
105,70€
ADD TO BASKET
3pc set: taper tap (6-8 thread chamfer) - second tap (4-5 thread chamfer) - final tap (2-3 thread chamfer), length: 40/100mm, thread angle 60°, core hole ø19.5mm, tolerance ISO2 6H HSS DIN352, ground, high speed steel, max 800N/mm² M22x2.5
106,80€
139,90€
-24%
ADD TO BASKET
length: 22/140mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø22.5mm. DIN374, ground, high speed steel w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for steel 1000N/mm², stainless steel and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H HSSE Co5...
107,50€
140,90€
-24%
ADD TO BASKET