mills
Goods available only in e-shop
Previous 1 2 3 ... 8 9 10 11 Next
with diamnond coating hole saw " Ceramic " for angle grinderholes to make nurklihvijagaKeraamilistele- and graniitplaatidele, ahjupottidele, looduskivimiteleAugufreesi servad on coated high value tööstusteemantitega, whereby saab muretult and exactly to bore through also most kõvematest materialspackingsuspension packinglook Product video
38,60€
ADD TO BASKET
39,10€
ADD TO BASKET
39,30€
ADD TO BASKET
39,30€
ADD TO BASKET
with end toothing, L1: 65mm, L2: 25mm, shank (ø2): 6mm TC ─ A (ZYA) DIN8033, high-performance tungsten carbide rotary burrs: maximum cutting edge stability, high tenacity of the cutting edge, cross toothing: higher cutting capacity compared with the simple toothing, especially for difficult to cut materials, suitable for e.g. high-alloy steels, non-rusting steels, acid-resistant steels, heat-resis...
40,60€
47,60€
-15%
ADD TO BASKET
L1: 65mm, L2: 25mm, shank (ø2): 6mm TC ─ F (RBF) DIN8033, high-performance tungsten carbide rotary burrs: maximum cutting edge stability, high tenacity of the cutting edge, cross toothing: higher cutting capacity compared with the simple toothing, especially for difficult to cut materials, suitable for e.g. high-alloy steels, non-rusting steels, acid-resistant steels, heat-resistant steels, die ca...
40,60€
47,60€
-15%
ADD TO BASKET
Available 3pc.
40,70€
ADD TO BASKET
Available 1pc. Highest cutting edge stability Improved cutting performance due to staggered tooth system Suitable for a wide range of applications Surface without discolouration High performances steel with hard metal To that filleted, edges break, plasters, welded seams and area preparation.Usably in high alloyed, steel rustproof, acid and heat resistant, cast and plastics. Technical Data diameter D1: 12.0mm d...
41,20€
ADD TO BASKET
w/o end toothing, L1: 65mm, L2: 25mm, shank (ø2): 6mm TC ─ A (ZYA) DIN8033, high-performance tungsten carbide rotary burrs: maximum cutting edge stability, high tenacity of the cutting edge, cross toothing: higher cutting capacity compared with the simple toothing, especially for difficult to cut materials, suitable for e.g. high-alloy steels, non-rusting steels, acid-resistant steels, heat-resist...
41,50€
48,60€
-15%
ADD TO BASKET
42,00€
ADD TO BASKET
42,10€
ADD TO BASKET
42,10€
ADD TO BASKET
Available 2pc.
42,20€
ADD TO BASKET
L1: 67mm, L2: 22mm, shank (ø2): 6mm TC ─ E (TRE) DIN8033, high-performance tungsten carbide rotary burrs: maximum cutting edge stability, high tenacity of the cutting edge, cross toothing: higher cutting capacity compared with the simple toothing, especially for difficult to cut materials, suitable for e.g. high-alloy steels, non-rusting steels, acid-resistant steels, heat-resistant steels, die ca...
42,30€
49,60€
-15%
ADD TO BASKET
L1: 65mm, L2: 25mm, shank (ø2): 6mm TC Alu DIN8033, high-performance tungsten carbide rotary burrs with coarse aluminium toothing, suitable for non-ferrous metals, aluminium, brass, copper, zinc, diecasts and plastics, for deburring, break edges, trimming, surface processing ø12mm
42,30€
49,60€
-15%
ADD TO BASKET
42,80€
ADD TO BASKET
Available 3pc. Max 1030 r/min Freesi depth 85mm Segmendi dimesions 3.5x10x24 mm 12mm six point shank YATO is a China branch of the group TOYA S.A, which is a listed firm in Poland. YATO is a best cost-performance Europe brand of professional hand tools all over the world, with a warehouse of 4000 m2 in Shanghai, consists of more than $8 millions stocks covering over 4000 items, including general hand tools, spec...
42,90€
ADD TO BASKET
L1: 65mm, L2: 25mm, shank (ø2): 6mm TC ─ C (WCR) DIN8033, high-performance tungsten carbide rotary burrs: maximum cutting edge stability, high tenacity of the cutting edge, cross toothing: higher cutting capacity compared with the simple toothing, especially for difficult to cut materials, suitable for e.g. high-alloy steels, non-rusting steels, acid-resistant steels, heat-resistant steels, die ca...
43,20€
50,60€
-15%
ADD TO BASKET
Available 2pc. Highest cutting edge stabilityImproved cutting performance due to staggered tooth systemSuitable for a wide range of applicationsSurface without discolourationHigh performances steel with hard metal To that filleted, edges break, plasters, welded seams and area preparation.Usably in high alloyed, steel rustproof, acid and heat resistant, cast and plastics. Technical Datadiameter D1: 12.0mmdiameter...
43,60€
ADD TO BASKET
w/o end toothing, L1: 65mm, L2: 25mm, shank (ø2): 6mm TC ─ A (ZYA) DIN8033, high-performance tungsten carbide rotary burrs: maximum cutting edge stability, high tenacity of the cutting edge, cross toothing: higher cutting capacity compared with the simple toothing, especially for difficult to cut materials, suitable for e.g. high-alloy steels, non-rusting steels, acid-resistant steels, heat-resist...
44,90€
52,60€
-15%
ADD TO BASKET
L1: 70mm, L2: 25mm, shank (ø2): 6mm TC ─ G (SPG) DIN8033, high-performance tungsten carbide rotary burrs: maximum cutting edge stability, high tenacity of the cutting edge, cross toothing: higher cutting capacity compared with the simple toothing, especially for difficult to cut materials, suitable for e.g. high-alloy steels, non-rusting steels, acid-resistant steels, heat-resistant steels, die ca...
44,90€
52,60€
-15%
ADD TO BASKET
L1: 77mm, L2: 32mm, shank (ø2): 6mm TC ─ L (KEL) DIN8033, high-performance tungsten carbide rotary burrs: maximum cutting edge stability, high tenacity of the cutting edge, cross toothing: higher cutting capacity compared with the simple toothing, especially for difficult to cut materials, suitable for e.g. high-alloy steels, non-rusting steels, acid-resistant steels, heat-resistant steels, die ca...
44,90€
52,60€
-15%
ADD TO BASKET
L1: 58mm, L2: 13mm, shank (ø2): 6mm TC ─ N (WKN) DIN8033, high-performance tungsten carbide rotary burrs: maximum cutting edge stability, high tenacity of the cutting edge, cross toothing: higher cutting capacity compared with the simple toothing, especially for difficult to cut materials, suitable for e.g. high-alloy steels, non-rusting steels, acid-resistant steels, heat-resistant steels, die ca...
44,90€
52,60€
-15%
ADD TO BASKET
Available 1pc. Highest cutting edge stability Improved cutting performance due to staggered tooth system With face gearing Suitable for a wide range of applications Surface without discolouration High performances steel with hard metal To that filleted, edges break, plasters, welded seams and area preparation.Usably in high alloyed, steel rustproof, acid and heat resistant, cast and plastics. Technical Data dia...
45,40€
ADD TO BASKET
Overall Length (L) 67COATING_TREATEMENTUncoatedDIAMETER_MM25MATERIALHSSE5SHANKRound
45,90€
ADD TO BASKET
Diameter (D) mm 13/13/13/13 Total length (L2) mm 56 / 56 / 56 / 56 Freehand router bit set, 4-piece for removing and machining various shapes in a variety of materials Suitable for use in wood and non-ferrous metals as well as iron Cylindrical shank system designed for use with drill drivers at speeds of 1000 to 2000 rpm Robert Bosch GmbH on tehnoloogial põhinev ettevõtte, mis asutati Robert Bosch...
46,00€
ADD TO BASKET
L1: 65mm, L2: 25mm, shank (ø2): 6mm TC Alu ─ C (WCR) DIN8033, high-performance tungsten carbide rotary burrs with coarse aluminium toothing, suitable for non-ferrous metals, aluminium, brass, copper, zinc, diecasts and plastics, for deburring, break edges, trimming, surface processing ø12mm
46,60€
54,60€
-15%
ADD TO BASKET
L1: 65mm, L2: 25mm, shank (ø2): 6mm TC ─ C (WCR) DIN8033, high-performance tungsten carbide rotary burrs: maximum cutting edge stability, high tenacity of the cutting edge, cross toothing: higher cutting capacity compared with the simple toothing, especially for difficult to cut materials, suitable for e.g. high-alloy steels, non-rusting steels, acid-resistant steels, heat-resistant steels, die ca...
46,60€
54,60€
-15%
ADD TO BASKET
47,00€
ADD TO BASKET
Available 3pc.
47,40€
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
