drill bits
Goods available only in e-shop
L1: 286mm, L2: 165mm, morse taper no. 3, drilling depth: 6 x ø, point angle 118°, helix angle 20-30°, tolerance h8 HSS DIN345, ground, highly efficient standard drill w. Morse taper, for steel ˂900N/mm² , cast steel and cast iron - alloyed and unalloyed, highly secure against fracture, cut chisel edge, length of the chisel edge is reduced to 1/10 of the diameter: good centring when starting to dri...
51,80€
62,50€
-18%
ADD TO BASKET
Available 2pc.
52,00€
ADD TO BASKET
Available 1pc. * 7 HSSmetal drill bits - fully ground - split point Ø 3-3,5-4-4,5-5-6-8 mm* 4 Extra masonry with carbide tip drill bits Ø 4-5-6-8 mm* 3 Tile drill bits with special carbide tip Ø 5-6-8 mm* 2 Diamond drill bits for ceram Ø 6-8 mm* 4 Brad point wood drill bits Ø 3-4-5-6 mm
52,30€
ADD TO BASKET
Available 1pc. HSS-TiN kiirlõiketeras. Tipunurk 130º topeltnurgaga tiputeritus spiraalinurk 20-30º. DIN. TiN- coating. steel valuterase malmi stainless steel hardened steel for aluminum bronze messingi etc for drilling. KS TOOLS Werkzeuge - Maschinen GmbH is one of the leading manufacturers of tools and industrial products. The company was founded in 1992 and its head office is located in Heusenstamm, the compan...
52,40€
ADD TO BASKET
Available 1pc. Single, high-clearance fluting ensures high-performance for deep and through-drilling in all types of wood.COATING_TREATEMENTUncoatedDIAMETER_MM28HEIGHT35LENGTH470LENGTH_ATTRIBUTELongSHANKHEXAWIDTH35
52,40€
ADD TO BASKET
Available 3pc. COATING_TREATEMENTUncoatedLENGTH_ATTRIBUTEStandardMATERIALHSSSHANKRoundTIP118⁰
52,40€
ADD TO BASKET
length: 360/460mm, abrasion-proof chrome vanadium steel, taper tap: exact and non-splintering drilling, Lewis-spiral: optimum chip clearance, hardened head and major cutting edge: high endurance, hexacon shank. suitable for soft wood, hard wood, glue wood, solid wood and beams ø26mm
52,60€
63,50€
-18%
ADD TO BASKET
length: 360/460mm, abrasion-proof chrome vanadium steel, taper tap: exact and non-splintering drilling, Lewis-spiral: optimum chip clearance, hardened head and major cutting edge: high endurance, hexacon shank. suitable for soft wood, hard wood, glue wood, solid wood and beams ø28mm
52,60€
63,50€
-18%
ADD TO BASKET
L1: 296mm, L2: 175mm, morse taper no. 3, drilling depth: 6 x ø, point angle 118°, helix angle 20-30°, tolerance h8 HSS DIN345, ground, highly efficient standard drill w. Morse taper, for steel ˂900N/mm² , cast steel and cast iron - alloyed and unalloyed, highly secure against fracture, cut chisel edge, length of the chisel edge is reduced to 1/10 of the diameter: good centring when starting to dri...
52,60€
63,50€
-18%
ADD TO BASKET
Available 2pc.
52,70€
ADD TO BASKET
Available 2pc. Overall Length (L) 600 Cutting Length (l) 550DIAMETER_MM22LENGTH_MM600SHANKSDS+TIP2 Cut
53,40€
ADD TO BASKET
Available 1pc. COATING_TREATEMENTFUSIOLENGTH_ATTRIBUTEStandardMATERIALHSSSHANKRoundTIP135⁰
53,40€
ADD TO BASKET
Kasutusotstarve (material):woodKasutusotstarve (material):metaldrill bit diameter [mm]:2.5drill bit diameter [mm]:3drill bit diameter [mm]:3.5drill bit diameter [mm]:4drill bit diameter [mm]:5drill bit diameter [mm]:5.5drill bit diameter [mm]:6drill bit diameter [mm]:7drill bit diameter [mm]:8drill bit diameter [mm]:10 Robert Bosch GmbH on tehnoloogial põhinev ettevõtte, mis asutati Robert Boschi ...
53,40€
ADD TO BASKET
taper and countersinker, ø1: 6.3mm, ø2: 25.0mm, ø3: 10.0mm, L1: 71mm, 3 cutting edges HSS ø6.3-25mm
53,50€
64,50€
-18%
ADD TO BASKET
L1: 291mm, L2: 170mm, morse taper no. 3, drilling depth: 6 x ø, point angle 118°, helix angle 20-30°, tolerance h8 HSS DIN345, ground, highly efficient standard drill w. Morse taper, for steel ˂900N/mm² , cast steel and cast iron - alloyed and unalloyed, highly secure against fracture, cut chisel edge, length of the chisel edge is reduced to 1/10 of the diameter: good centring when starting to dri...
53,50€
64,50€
-18%
ADD TO BASKET
L1: 296mm, L2: 175mm, morse taper no. 3, drilling depth: 6 x ø, point angle 118°, helix angle 20-30°, tolerance h8 HSS DIN345, ground, highly efficient standard drill w. Morse taper, for steel ˂900N/mm² , cast steel and cast iron - alloyed and unalloyed, highly secure against fracture, cut chisel edge, length of the chisel edge is reduced to 1/10 of the diameter: good centring when starting to dri...
53,50€
64,50€
-18%
ADD TO BASKET
Available 1pc. DIN 338 Typ NRight hand cuttingRelieved cone has a ground pointCutting edge has thinning point130° pointed angle20 - 30° spiral angleHigh heat hardness constancyFor heavy loadingGold coated surfaceHigh performance cobalt steelIdeally usably in high and low alloyed steel up to 1, 100 N/mm² tensile, compensation steel and stainless steel, rustproof and acid steady steel and warm and cold forged stee...
53,60€
ADD TO BASKET
Available 1pc. Overall Length (L) 60 Cutting Length (l2) 30 Internal Diameter (i) 27COATING_TREATEMENTUncoatedDIAMETER_MM35LENGTH_ATTRIBUTEShortMATERIALHSSSHANKWeldon
53,70€
ADD TO BASKET
THUNDERWEB konstruktsiooni is characterized by conical core, which pakseneb drill blade rear pc direction. THUNDERWEB core on even most kitsamas place paksem kui standard drill blade core. Paraboolne südamiku cross-section. big südamiku thickness. Tööosa väljutab kuumad laastud quickly and hajutab soojust better, pikendades lifetime. 135° lõhistipp - precise alustamine, drill blade no liigu kohalt...
53,80€
ADD TO BASKET
ø1: 4.0mm, ø2: 20.0mm, steps: 9 (90° ─ 2mm), ø3: 8.0mm, L1: 75mm, The CBN ground and spiral flutes: quiet running and high cutting performance, optimized chip flow protects the cutting edges and reduces built-up edges and cold weld marks: even long non-breaking chips will be removed easily, cone makes it easier to withdraw the tool from the materialHSS-TiAlNTiAlN-coating: wear resistant titanium a...
54,30€
65,50€
-18%
ADD TO BASKET
L1: 291mm, L2: 170mm, morse taper no. 3, drilling depth: 6 x ø, point angle 118°, helix angle 20-30°, tolerance h8 HSS DIN345, ground, highly efficient standard drill w. Morse taper, for steel ˂900N/mm² , cast steel and cast iron - alloyed and unalloyed, highly secure against fracture, cut chisel edge, length of the chisel edge is reduced to 1/10 of the diameter: good centring when starting to dri...
54,30€
65,50€
-18%
ADD TO BASKET
Available 3pc. DIAMETER_MM8HEIGHT15LENGTH150TIPDiamondWIDTH50
54,50€
ADD TO BASKET
set contains: SHOCKWAVE™ screwdriver adapters: 25 x 25 mm long 1 x PH1 / 2 x PH2, 1 x PZ1 / 3 x PZ2, 2 x TX10 / 2 x TX15 / 3 x TX20 / 2 x TX25 / 2 x TX30 / 1 x TX40 / 1 x TX50, 1 x hex 4 mm / 1 x hex 5 mm, 1 x SL 0,6 x 4,5 / 1 x SL 0,8 x 5,5 / 1 x SL 1,2 x 6,5. 8 x 50 mm long 1 x PH2, 1 x PZ1 / 1 x PZ2, 1 x TX10 / 1 x TX15 / 1 x TX20 / 1 x TX25 / 1 x TX30. 1 magnetiline bitihoidja length 60 mm. 1 ...
54,90€
ADD TO BASKET
in plastic box HSS-COB5 cobalt universal metal drill bits home- and pisitöökojas for use. set contains measuring 1.0-1.5-2-2.5-3-3.5-4-4.5-5-5.5-6-6.5-7-7.5-8-8.5-9-9.5-10 mm. JBM journey began in 1983, as they started manufacturing cylinders. Today, JBM manufactures half a million autocomponents every day and almost every vehicle manufactured in the wordl has a piece of JBM. JBM firmly believes t...
54,90€
ADD TO BASKET
Available 1pc. 5x110mm; 6x110mm; 6x160mm; 7x110mm; 7x160mm; 8x110mm; 8x160mm; 10x160mm; 12x160mm; 14x160mm; 16x210mm; 1xPIIK 250mm; 1xMEISEL 20x250mm
55,10€
60,30€
-9%
ADD TO BASKET
Shockwave Impact Duty™ kruvikeeramisotsakud: 25 x length 25 mm 1 x PH1 / 2 x PH2, 1 x PZ1 / 3 x PZ2, 2 x TX10 / 2 x TX15 / 3 x TX20 / 2 x TX25 / 2 x TX30 / 1 x TX40 / 1 x TX50, 1 x 4 mm hex / 1 x 5 mm hex, 1 x rabbet 0,6 x 4,5 / 1 x rabbet 0,8 x 5,5 / 1 x rabbet 1,2 x 6,5. 8 x length 50 mm 1 x PH2, 1 x PZ1 / 1 x PZ2, 1 x TX10 / 1 x TX15 / 1 x TX20 / 1 x TX25 / 1 x TX30. 1 x 60 mm long magnetized b...
55,30€
ADD TO BASKET
Available 1pc. Overall Length (L) 60 Cutting Length (l2) 30 Internal Diameter (i) 40COATING_TREATEMENTUncoatedDIAMETER_MM48LENGTH_ATTRIBUTEShortMATERIALHSSSHANKWeldon
55,40€
81,80€
-33%
ADD TO BASKET
55,50€
ADD TO BASKET
Brand HOLZSTAR
55,60€
ADD TO BASKET
Available 1pc. HSS Fully Ground Point angle 118˚ Split point1 / 1,5 / 2 / 2,5 / 3 / 3,5 / 4 / 4,5 / 5 / 5,5 / 6 / 6,5 / 7 / 7,5 / 8 / 8,5 / 9 / 9,5 / 10 / 10,5 / 11 / 11,5 / 12 / 12,5 / 13mmAPPLICATIONMetalCOATING_TREATEMENTUncoatedHEIGHT55LENGTH200LENGTH_ATTRIBUTEStandardMATERIALHSSSHANKRoundTIP118⁰WIDTH108
55,80€
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
