Co2 / argon reducer 230v with rotameter and heater

Available 3pc. The CO2 / Argon reducer with rotameter and heater is designed to reduce the technical gas outlet pressure to the required working pressure.

Characteristic:
professional cylinder reducer designed for gases: CO2 - carbon dioxide, ARGON and mixtures of these gases
the reducer is equipped with: manometer, rotameter, adjustment screw, safety valve and heater
the high-pressure manometer shows the pressure of the technical gas remaining in the cylinder
adjustment screw is used to adjust the flow of shielding gas when welding using methods such as TIG, MIG, MAG
the rotameter shows the gas flow value
the reducing valve maintains a constant outlet pressure value regardless of the inlet pressure value
the safety valve protects against exceeding the maximum pressure in the outlet chamber
the preheater prevents the reducer from freezing when the technical gas consumption increases
230V power supply, the device is equipped with a power plug

Inlet pressure (Mpa) 20
Thread at inlet L 21.8x1/14
At the outlet, screw G 1/4
Hose end 6.3 mm
Throughput (l/min) 25
Gas type Argon/carbon dioxide
Manometer diameter 50 mm
Overall dimensions: length x width x height
165x180x155 mm