Autokaitsme power tester

Autokaitsme tester
working range 12-48V 0-20A AC / DC
fast and täpseks voolutestimiseks
fuse box easy connection

Testeriga can measure pinget common Slotted kaitsmetega kaitsmekarbis. it is perfect passenger cars and light commercial vehicles pingeprobleemide for detecting. it is characterized by fast mõõtmisaeg and high accuracy, in addition it is very easy to use.


Testrit may to use only motor vehicles voltage measuring.
measurement ajal may kaitsmeplaat kuumeneda. Puudutada saab it alles after jahtumist.
don't exceed tester maximum load: 20A / 32V max 10 seconds.
before tester ühendamist or disconnecting switch süütelüliti  out.
don't demonteerige testerit neither muutke It's vooluahelat.
Tester peaks be moisture eest kaitstud.
don't use force testpistiku for pulling.
don't use testrit, kui this doesn't work normally or on damaged.
keep testerit for children unreachable.

specification
Mõõtepiirkond: 0,1A ~ 19,9A
maximum load: 20A / 32V DC max 10 seconds
measurement accuracy: ± (2% lugemist + 2 numbrit)
Kaitsme type: standard
Toiteallikas: 3V, CR2032 battery or samaväärne

Kasutamistingimused: temperature: 00C ~ 400C, suhteline õhuniiskus <75%
Säilitamistingimused: temperature: -100C ~ 400C, suhteline õhuniiskus <80%

 use

switch süütelülitist car Input out.
remove testeriga kaasasolev terakaitsme kaitsmekork. then remove car protection testitavast vooluringist and sisestage this tester kaitsmepistikusse. this ensures praeguse protection correct level. (Testeriga contains olev kaitsmepinge: 20A / 32V, standard).
Sisestage tester plug car kaitsmepessa.
if necessary saab sõidukit toita süütelukuga, nii et car vooluringis oleks power. then switch tester in (libistades toitelüliti to the position "ON").
Mõõtke sõidukis pinget, praegused väärtused kuvatakse tester ekraanil.
each ajal you can vajutada nuppu, et lülitada in LED-light (tester akupinge may mõjutada lighting eredust. Kui LED light diode on hämar, vahetage battery new against).
after measurement completion switch tester out.
Kui Device displeile ilmub Symbol, discharges Device battery and this tuleks immediately out to change.
battery for changing remove akukaane screws, remove akukate and asendage used battery new the same type battery, veendudes, et polarity oleks correct. then place akukate backward oma to the area and Turn screws kinni.

attention
before battery cap removal switch device out and be sure that, et this oleks AC power open connected.