Automatic leak tester for pipes, hoses, connectors, fittings and fuel tanks

Leak detector
Automatic leak tester for pipes, hoses, connectors, fittings and fuel tanks. This allows us to quickly and accurately
finding leaks in piping systems in minutes. TOGETHER
The possibility of using the device to test the intake system, Ź exhaust system test, cooling system test, car seal test, fuel tank system test, test of various connectors.
Power supply: 12V battery
Procedure:
1. Pour 20 ml of e.g. baby oil into the leak detector
2. Open the motor cover and hang the detector inside the cover
3. Disconnect the pipe you want to connect to the detector.
4. Connect the detector to the DC12V battery.
5. Turn on the power switch.
6. After 30 seconds, the pipe will fill with smoke.
7. You check for leaks.

The detector has protection if it exceeds the operating limit, e.g
Above 75 degrees, it automatically shuts off the power. In this case, stop working and return after the device cools down.
The set includes:

NE03010 tester with manometer and indicator
Power cable with alligator clips
Long smoke pipe
Hook (with compression nut)
Rubber connecting ends, black (8 pcs.)
Rubber closing ends, red (8 pcs.)
standard cone adapter
Universal adapter - air pump
Valve core key
Special EVAP connector
Test oil filler bottle
Hard rubber hose cap
Paper manual in English