Ceramic surface protection 9h 50ml

The set includes paint protection fluid, 2 applicator pads and a microfiber cloth for polishing
Excellent restorative effect
Very good scratch resistance
Water repellent and easy to clean
Durable protection against weather, UV radiation and mechanical influences.

Quantity: per vehicle (mid-size passenger car) approx. 25 ml

Instructions for use for the set, which consists of:
1 x 50 ml Chamäleon Ceramic shield 9H protection
1 x microfiber cloth
2 x application sponges

Processing conditions:
5 °C to 30 °C and 30% to 80% relative humidity. Ensure adequate ventilation.
Processing instructions:
Do not use on heated surfaces. Do not use in direct sunlight. Please note that the product black be used in a clean environment. Drying depends on the prevailing humidity.

Pretreatment:
Attention: Before applying Ceramic shield 9H protection, it is very important to clean the surface very thoroughly to ensure effective and durable protection. Dirt, impurities, polishing residues
and wax, as well as fat and grease films, black be completely removed.

Surfaces to be treated black be dust-free and dry during application. Ceramic shield H9 is recommended to be applied to hard-to-reach areas before applying to larger surfaces.
 Shake the Ceramic shield 9H bottle very well before use.
 Put a few drops of Ceramic shield 9H protection on the sponge. We recommend pressing the applicator sponge onto the opening of the bottle and quickly inverting so that the sponge absorbs only a small amount.
 Apply a very thin layer of Ceramic shield 9H protection and spread it evenly over the surface. To ensure a very homogeneous result, it is necessary to apply this product without laboratory marks.
 After a drying time of 3 minutes at 20-25°C, polish to a now dry mat, film with a microfibre cloth and buff in circular motions until you achieve an even, streak-free glossy finish.

Drying time:
After drying for about 3 minutes at 20-25°C, thoroughly polish the ceramic 9H protection.
A higher processing temperature will reduce the drying time.
During the first 8 hours of drying, the sealed surface should not come into contact with water or excessive moisture, as this would damage the protective function.
After full curing, Ceramic Shield 9H protection can only be removed by polishing.

Multiple use:
To achieve a higher protective function or to improve the regenerative effect, it is possible to apply Ceramic shield 9H protection several times. In this case, follow the intermediate drying time of approx. 20-30 minutes after removing the excess.

Care instructions:
By sealing with Ceramic shield 9H protection, painted surfaces are durable and effectively protected.
To ensure a long-lasting protective function, subsequent paint care black always be carried out gently.
We recommend washing the car only with water and car shampoo, using a microfiber cloth or a soft sponge.

Life Expectancy:
Depending on the workload, the frequency and intensity of car care/car wash, the effect of UV radiation and the effects of the weather, the life span is from one to several years.