Sensor / Probe RENAULT MEGANE III Hatchback (BZ0/1_, B3_) 2.0 TCe 220 (162kW / 220hp) 2008 - ...
Previous 1 2 3 Next
| Number of pins | 2-pin connector |
27,00€
31,70€
-15%
ADD TO BASKET
| Thread Size | M18x1.5 |
| Total Length | 370mm |
| Weight | 0.12kg |
| Conductor Number | 4conductor |
| Warranty | 3 years warranty |
| Lambda Sensor | Regulating Probe |
| Exhaust System | before catalytic converter |
| More information » | |
28,30€
33,30€
-16%
ADD TO BASKET
| Ø | 12.6mm |
| Weight | 0.02kg |
| Construction Year to | 09.2015 |
| Alternatively | |
30,30€
35,60€
-15%
ADD TO BASKET
| Lambda Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-SK-000 |
31,00€
36,40€
-15%
ADD TO BASKET
| Number of connectors | 2 |
| Weight | 0.05kg |
31,10€
36,60€
-16%
ADD TO BASKET
| Length | 340mm |
| Conductor Number | 4conductor |
| Number of circuits | 4 |
| Resistor | 9Ohm |
| Cable Length | 340mm |
| Lambda Sensor | Heated |
32,90€
38,70€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | F4R 874 |
| Construction Year to | 04.2014 |
| Lambda Sensor | Regulating Probe |
35,20€
41,40€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
35,80€
42,10€
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Supplementary Article/Supplementary Info | with squeeze connector, with shrink squeeze connector |
| Lambda Sensor | Finger probe, Heated, Thread pre-greased, Regulating Probe |
| Number of pins | 4-pin connector |
| for OE No. | V99760001 |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Length | 350mm |
| Exhaust System | after catalytic converter |
| Engine Code | F4R 874 |
| Construction Year to | 04.2014 |
| More information » | |
38,00€
44,70€
-15%
ADD TO BASKET
| Cable Length | 350mm |
| Conductor Number | 4conductor |
| Supplementary Article/Info 2 | with fastening material |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Regulating Probe, Diagnostic Probe |
| Available as universal article as well, see article no. | 1.998.235 |
| Number of circuits | 4 |
| Engine Code | F4R 874, F4R874, F4R874 |
| Construction Year to | 03.2014 |
| Fitting Position | before catalytic converter, after catalytic converter |
| Quantity required | 1, 1 |
| Block Separation | |
| More information » | |
40,70€
47,90€
-16%
ADD TO BASKET
| Quality | OE |
| for manufacturer | DENSO |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| Weight | 93g |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Lambda Sensor, Regulating Probe |
| Gross Weight | 140g |
| Engine no. up to | 140414 |
| for OE No. | 8200771294 |
| Exhaust System | for pre-catalytic converter |
| More information » | |
41,40€
48,70€
-15%
ADD TO BASKET
| Measuring Range from | 20kPa |
| Measuring Range to | 300kPa |
| Supplementary Article/Info 2 | without integrated air temperature sensor |
43,80€
51,50€
-15%
ADD TO BASKET
| Cable Length | 335mm |
| Lambda Sensor | Planar probe, Heated, Regulating Probe, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
44,30€
52,10€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Total Length | 370mm |
| Available as universal article as well, see article no. | 0258986602 |
| Recommended change interval | 250,000km |
| Lambda Sensor | Regulating Probe, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
| More information » | |
49,80€
58,60€
-16%
ADD TO BASKET
| Cable Length | 350mm |
| Conductor Number | 4conductor |
| Supplementary Article/Info 2 | with fastening material |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Regulating Probe, Diagnostic Probe |
| Available as universal article as well, see article no. | 10.8235 |
| Number of circuits | 4 |
| Engine Code | F4R 874, F4R874, F4R874 |
| Construction Year to | 03.2014 |
| Fitting Position | before catalytic converter, after catalytic converter |
| Quantity required | 1, 1 |
| Block Separation | |
| More information » | |
50,00€
58,80€
-15%
ADD TO BASKET
| Quality | OE |
| for manufacturer | DENSO |
| Thread Size | M18x1.5 |
| Cable Length | 400mm |
| Number of pins | 4-pin connector |
| Weight | 82g |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Lambda Sensor, Regulating Probe |
| Gross Weight | 115g |
| Engine no. up to | 140414 |
| for OE No. | 8200771294 |
| Exhaust System | for pre-catalytic converter |
| More information » | |
51,20€
60,20€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160,000km |
| Connector/Clamp | Connector may need adjustment |
| Lambda Sensor | Regulating Probe, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
56,50€
60,50€
-7%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Total Length | 370mm |
| Number of pins | 4-pin connector |
| Lambda Sensor | Planar probe, Thread pre-greased, Regulating Probe, Diagnostic Probe |
| Weight | 0.093kg |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
| More information » | |
65,00€
76,40€
-15%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
