Crankshaft Seal / Set ROVER 75 (RJ) 1.8 (88kW / 120hp) 1999 - 2005
| Fitting Position | Drive Axle, Front |
| Height 1 | 7mm |
| Outer Diameter 1 | 40mm |
| Inner Diameter 1 | 30mm |
| Material | FPM (fluoride rubber) |
| Swirl Type | Right-hand Twist |
| Dust Cover | with dust lip |
| Quantity required | 2 |
| More information » | |
$2,50
$2,90
-14%
ADD TO BASKET
| Inner Diameter | 30mm |
| Outer Diameter | 40mm |
| Height | 7mm |
| Radial Shaft Seal Design | ASW |
| Swirl Type | Right-hand Twist |
| Material | FPM (fluoride rubber) |
| Dust Cover | with dust lip |
| Colour | black |
| Fitting Position | frontal sided |
| Quantity required | 2 |
| More information » | |
$2,60
$3,00
-14%
ADD TO BASKET
| Height | 7mm |
| Outer Diameter | 40mm |
| Inner Diameter | 30mm |
| Material | FPM (fluoride rubber) |
| Radial Shaft Seal Design | 827S RD W |
| Swirl Type | Right-hand Twist |
| Fitting Position | Front |
| Quantity required | 2 |
| More information » | |
| Height | 7mm |
| Outer Diameter | 40mm |
| Inner Diameter | 30mm |
| Material | FPM (fluoride rubber) |
| Radial Shaft Seal Design | 827S LD W |
| Swirl Type | Left-hand Twist |
| Fitting Position | Rear |
| Quantity required | 2 |
| More information » | |
| Inner Diameter | 30mm |
| Outer Diameter | 40mm |
| Height | 7mm |
| Quantity required | 2 |
| Engine Code | 18 K4F |
| Block Separation | |
| Fitting Position | frontal sided |
| More information » | |
$4,30
$5,00
-15%
ADD TO BASKET
| Inner Diameter | 27mm |
| Outer Diameter | 39.5mm |
| Height | 7mm |
| Fitting Position | frontal sided |
| Engine Code | 18 K4F |
$4,50
$5,30
-16%
ADD TO BASKET
| Height 1 | 7mm |
| Outer Diameter 1 | 40mm |
| Inner Diameter 1 | 30mm |
| Material | FPM (fluoride rubber) |
| Swirl Type | Left-hand Twist |
| Dust Cover | with dust lip |
| Fitting Position | Rear |
| More information » | |
$5,10
$6,00
-16%
ADD TO BASKET
| Inner Diameter | 30mm |
| Outer Diameter | 40mm |
| Height | 7mm |
| Radial Shaft Seal Design | ASW |
| Swirl Type | Left-hand Twist |
| Material | FPM (fluoride rubber) |
| Dust Cover | with dust lip |
| Fitting Position | transmission sided |
| Quantity required | 2 |
| More information » | |
$5,10
$6,00
-16%
ADD TO BASKET
| Fitting Position | transmission sided |
| Inner Diameter | 30mm |
| Outer Diameter | 40mm |
| Height | 7mm |
| Quantity required | 2 |
| Engine Code | 18 K4F |
$6,00
$7,00
-15%
ADD TO BASKET
| Height | 7mm |
| Outer Diameter | 39.5mm |
| Inner Diameter | 27.5mm |
| Material | FPM (fluoride rubber) |
| Radial Shaft Seal Design | 827S RD |
| Swirl Type | Right-hand Twist |
| Fitting Position | frontal sided |
| Engine Code | 18 K4F |
| More information » | |
| Fitting Position | transmission sided |
| Height | 7.5mm |
| Outer Diameter | 125.5mm |
| Outer Diameter 1 | 116mm |
| Inner Diameter | 79mm |
| Material | NBR (nitrile butadiene rubber) |
| Inner Diameter | 79mm |
| Outer Diameter | 116mm, 125.5mm |
| Height | 7.5mm |
| Fitting Position | transmission sided |
| Engine Code | 18 K4F |
$8,70
$10,20
-15%
ADD TO BASKET
| Fitting Position | Pulley side |
$10,00
$11,70
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
