Timing Belt / Set ROVER 25 I Hatchback (RF) 2.0 iDT (83kW / 113hp) 1999 - 2006
| Number of Teeth | 78 |
| Width | 24mm |
| Vehicle Identification Number (VIN) from | 471565 |
| Vehicle configuration line / variant | Ch.471565 > |
| for OE No. | MVF100040 |
| Number of Teeth | 112 |
| Width | 28mm |
| Vehicle Identification Number (VIN) to | 471564 |
| Driven units | Camshaft |
| Vehicle configuration line / variant | Ch. >471564 |
| for OE No. | LHN10029 |
| Number of Teeth | 78 |
| Width | 22mm |
| Vehicle Identification Number (VIN) to | 471564 |
| Vehicle configuration line / variant | Ch. >471564 |
| for OE No. | MVF10001 |
$11,90
$13,90
-15%
ADD TO BASKET
| Number of Teeth | 112 |
| Length | 1, 067mm |
| Width | 28mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) to | YD 471564 |
$12,10
$14,20
-15%
ADD TO BASKET
| Number of Teeth | 78 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.13kg |
| Width | 24mm |
| Tooth Pitch | 9.525mm |
| Driven units | Injection pump |
| Vehicle Identification Number (VIN) from | YD471565 |
| More information » | |
$16,80
$19,80
-16%
ADD TO BASKET
| Number of Teeth | 78 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.134kg |
| Width | 22mm |
| Tooth Pitch | 9.525mm |
| Driven units | Injection pump |
| Vehicle Identification Number (VIN) to | YD471564 |
| More information » | |
$17,80
$20,90
-15%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Colour | black |
| Number of Teeth | 78 |
| Width | 24mm |
| Tooth Pitch | 9.525mm |
| Length | 743mm |
| Driven units | Injection pump |
| Article number of the recommended special tool | GAT4406A |
| More information » | |
$18,30
$21,50
-15%
ADD TO BASKET
| Number of Teeth | 112 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.202kg |
| Width | 28mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) to | YD471564 |
| More information » | |
$21,20
$24,90
-15%
ADD TO BASKET
| Belt Pulley Ø | 60mm |
| Height 1 | 26mm |
| Height 2 | 32mm |
| Weight | 0.5kg |
| Vehicle Identification Number (VIN) from | 471565 |
| Vehicle configuration line / variant | Ch.471565 > |
| for OE No. | LHP100940 |
| More information » | |
$21,40
$25,10
-15%
ADD TO BASKET
| Number of Teeth | 112 |
| Length | 1, 067mm |
| Width | 30mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) from | YD 471565 |
$21,50
$25,30
-16%
ADD TO BASKET
| Ø | 60mm |
| Width | 26mm |
| Tensioner Pulley Actuation | Manual |
| Engine no. from | 8368 |
| Driven units | Injection pump |
| Vehicle Equipment | for vehicles with air conditioning |
$21,70
$25,50
-15%
ADD TO BASKET
| Number of Teeth | 112 |
| Width | 30mm |
| Vehicle Identification Number (VIN) from | 471565 |
| Driven units | Camshaft |
| Vehicle configuration line / variant | Ch.471565 > |
| for OE No. | LHN100760 |
| Belt Pulley Ø | 60mm |
| Height 1 | 26mm |
| Height 2 | 32mm |
| Weight | 0.4kg |
| Vehicle Identification Number (VIN) to | 471564 |
| Vehicle configuration line / variant | Ch. >471564 |
| for OE No. | LHP100550 |
| More information » | |
$23,80
$28,00
-15%
ADD TO BASKET
| Outer Diameter 1 | 60mm |
| Width 1 | 35mm |
| Vehicle Identification Number (VIN) | [YD 471564;], [YD 471565;] |
$24,20
$28,50
-16%
ADD TO BASKET
| Outer Diameter 1 | 60mm |
| Width 1 | 34mm |
| Vehicle Identification Number (VIN) | [YD 471064;], [YD 471565;] |
$26,50
$31,20
-16%
ADD TO BASKET
| Number of Teeth | 112 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.2kg |
| Width | 30mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) from | YD471565 |
| More information » | |
$27,10
$31,90
-16%
ADD TO BASKET
| Ø | 60mm |
| Width | 34mm |
| Vehicle Identification Number (VIN) from | YD471565 |
| Engine no. up to | 8367 |
| Fitting Position | Right |
| Vehicle Equipment | for vehicles with air conditioning |
$29,20
$34,30
-15%
ADD TO BASKET
| Width | 34mm |
| Outer Diameter | 60mm |
| Weight | 0.415kg |
$30,20
$35,50
-15%
ADD TO BASKET
| Ø | 60mm |
| Width | 34mm |
| Tensioner Pulley Actuation | Manual |
| Vehicle Identification Number (VIN) from | YD471565 |
| Engine no. up to | 5048 |
| Fitting Position | Left |
| Driven units | Camshaft |
| Vehicle Equipment | for vehicles without air conditioning |
| More information » | |
$30,60
$36,00
-15%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Colour | black |
| Number of Teeth | 112 |
| Width | 30mm |
| Tooth Pitch | 9.525mm |
| Length | 1, 067mm |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT4406A |
| More information » | |
$37,90
$44,50
-15%
ADD TO BASKET
| Packaging length | 26.5cm |
| Packaging width | 16.5cm |
| Packaging height | 7cm |
| Weight | 0.66kg |
| Number of Teeth | 78 |
| Width | 24mm |
| Driven units | Injection pump |
| Vehicle Identification Number (VIN) from | YD471565 |
| Engine no. from | 8368 |
| More information » | |
$39,80
$46,80
-15%
ADD TO BASKET
| Packaging length | 26.5cm |
| Packaging width | 16.5cm |
| Packaging height | 7cm |
| Weight | 0.562kg |
| Number of Teeth | 78 |
| Width | 22mm |
| Driven units | Injection pump |
| Vehicle Identification Number (VIN) to | YD471564 |
| More information » | |
$40,10
$47,20
-16%
ADD TO BASKET
| Packaging length | 26.5cm |
| Packaging width | 16.5cm |
| Packaging height | 9.5cm |
| Weight | 1.068kg |
| Number of Teeth | 112 |
| Width | 28mm |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) to | YD471564 |
| More information » | |
$73,10
$86,00
-16%
ADD TO BASKET
| Packaging length | 26.5cm |
| Packaging width | 16.5cm |
| Packaging height | 9.5cm |
| Weight | 1.15kg |
| Number of Teeth | 112 |
| Width | 30mm |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) from | YD471565 |
| Engine no. from | 8368 |
| More information » | |
$79,70
$93,70
-15%
ADD TO BASKET
| Number of track rollers | 2 |
| Number of belts | 2 |
| Width 1 | 30mm |
| Width 2 | 24mm |
| Number of Teeth | 112 |
| Number of Teeth 2 | 78 |
$101,00
$118,90
-16%
ADD TO BASKET
| Weight | 1.5kg |
| Vehicle configuration line / variant | Ch. >471564 # Ch. > |
| Number of Teeth | 112 |
| Width | 28mm |
| Length | 1, 067mm |
| Number of Teeth 1 | 78 |
| Width 1 | 22mm |
| Length 1 | 743mm |
| Number of belts | 2 |
| 2 Belts | |
| Rollers contained | 3 |
| More information » | |
$105,80
$124,50
-16%
ADD TO BASKET
| Driven units | Camshaft, Injection pump, Camshaft, Injection pump |
| Vehicle Equipment | for vehicles without air conditioning, for vehicles with air conditioning |
| Engine no. from | 5049, 8368 |
| Article number of the recommended special tool | GAT4406A, GAT4406A |
| Block Separation | |
$117,00
$137,60
-15%
ADD TO BASKET
| Packaging length | 26.5cm |
| Packaging width | 16.5cm |
| Packaging height | 9.5cm |
| Weight | 1.572kg |
| 2 Belts | |
| Width 2 | 24mm |
| Number of Teeth 2 | 78 |
| Width 1 | 30mm |
| Number of Teeth 1 | 112 |
| Driven units | Camshaft, Injection pump |
| Vehicle Identification Number (VIN) from | YD471565 |
| Engine no. from | 8368 |
| More information » | |
$120,60
$141,90
-16%
ADD TO BASKET
| Weight | 1.6kg |
| Vehicle configuration line / variant | Ch.471565 > # Ch.47 |
| Number of Teeth | 112 |
| Width | 30mm |
| Length | 1, 067mm |
| Number of Teeth 1 | 78 |
| Width 1 | 24mm |
| Length 1 | 743mm |
| Number of belts | 2 |
| 2 Belts | |
| Rollers contained | 3 |
| More information » | |
$131,70
$155,00
-16%
ADD TO BASKET
| Colour | black |
| Number of Teeth 1 | 112 |
| Number of Teeth 2 | 78 |
| Width 1 | 30mm |
| Width 2 | 24mm |
| Belts | with rounded tooth profile |
| Engine no. from | 8368 |
| Vehicle Equipment | for vehicles with air conditioning |
| More information » | |
$153,90
$181,10
-16%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
