Timing belt and water pump kit ROVER 25 I Hatchback (RF) 2.0 iDT (83kW / 113hp) 1999 - 2006
Previous 1 2 Next
| Number of Teeth | 78 |
| Width | 24mm |
| Vehicle Identification Number (VIN) from | 471565 |
| Vehicle configuration line / variant | Ch.471565 > |
| for OE No. | MVF100040 |
| Number of Teeth | 112 |
| Width | 28mm |
| Vehicle Identification Number (VIN) to | 471564 |
| Driven units | Camshaft |
| Vehicle configuration line / variant | Ch. >471564 |
| for OE No. | LHN10029 |
| Number of Teeth | 78 |
| Width | 22mm |
| Vehicle Identification Number (VIN) to | 471564 |
| Vehicle configuration line / variant | Ch. >471564 |
| for OE No. | MVF10001 |
$11,90
$13,90
-15%
ADD TO BASKET
| Number of Teeth | 112 |
| Length | 1, 067mm |
| Width | 28mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) to | YD 471564 |
$12,10
$14,20
-15%
ADD TO BASKET
$15,10
$17,80
-16%
ADD TO BASKET
| Operating Mode | Mechanical |
| Supplementary Article/Supplementary Info | with gasket/seal |
$16,10
$18,90
-15%
ADD TO BASKET
| Operating Mode | Mechanical |
| Water Pump Type | for V-ribbed belt use |
| Water pump impeller material | Steel |
| Supplementary Article/Supplementary Info | with gasket/seal |
$16,30
$19,10
-15%
ADD TO BASKET
| Number of Teeth | 78 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.13kg |
| Width | 24mm |
| Tooth Pitch | 9.525mm |
| Driven units | Injection pump |
| Vehicle Identification Number (VIN) from | YD471565 |
| More information » | |
$16,80
$19,80
-16%
ADD TO BASKET
| Number of Teeth | 78 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.134kg |
| Width | 22mm |
| Tooth Pitch | 9.525mm |
| Driven units | Injection pump |
| Vehicle Identification Number (VIN) to | YD471564 |
| More information » | |
$17,80
$20,90
-15%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Colour | black |
| Number of Teeth | 78 |
| Width | 24mm |
| Tooth Pitch | 9.525mm |
| Length | 743mm |
| Driven units | Injection pump |
| Article number of the recommended special tool | GAT4406A |
| More information » | |
$18,30
$21,50
-15%
ADD TO BASKET
| Operating Mode | Mechanical |
| Supplementary Article/Supplementary Info | with gasket/seal |
| Impeller Ø | 85.5mm |
| Vehicle configuration line / variant | PV |
| for OE No. | PEB102420 |
$19,80
$23,30
-16%
ADD TO BASKET
| Number of Teeth | 112 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.202kg |
| Width | 28mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) to | YD471564 |
| More information » | |
$21,20
$24,90
-15%
ADD TO BASKET
| Belt Pulley Ø | 60mm |
| Height 1 | 26mm |
| Height 2 | 32mm |
| Weight | 0.5kg |
| Vehicle Identification Number (VIN) from | 471565 |
| Vehicle configuration line / variant | Ch.471565 > |
| for OE No. | LHP100940 |
| More information » | |
$21,40
$25,10
-15%
ADD TO BASKET
| Number of Teeth | 112 |
| Length | 1, 067mm |
| Width | 30mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) from | YD 471565 |
$21,50
$25,30
-16%
ADD TO BASKET
| Ø | 60mm |
| Width | 26mm |
| Tensioner Pulley Actuation | Manual |
| Engine no. from | 8368 |
| Driven units | Injection pump |
| Vehicle Equipment | for vehicles with air conditioning |
$21,70
$25,50
-15%
ADD TO BASKET
| Number of Teeth | 112 |
| Width | 30mm |
| Vehicle Identification Number (VIN) from | 471565 |
| Driven units | Camshaft |
| Vehicle configuration line / variant | Ch.471565 > |
| for OE No. | LHN100760 |
| Belt Pulley Ø | 60mm |
| Height 1 | 26mm |
| Height 2 | 32mm |
| Weight | 0.4kg |
| Vehicle Identification Number (VIN) to | 471564 |
| Vehicle configuration line / variant | Ch. >471564 |
| for OE No. | LHP100550 |
| More information » | |
$23,80
$28,00
-15%
ADD TO BASKET
| Outer Diameter 1 | 60mm |
| Width 1 | 35mm |
| Vehicle Identification Number (VIN) | [YD 471564;], [YD 471565;] |
$24,20
$28,50
-16%
ADD TO BASKET
| New Part |
| Outer Diameter 1 | 60mm |
| Width 1 | 34mm |
| Vehicle Identification Number (VIN) | [YD 471064;], [YD 471565;] |
$26,50
$31,20
-16%
ADD TO BASKET
| Number of Teeth | 112 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.2kg |
| Width | 30mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) from | YD471565 |
| More information » | |
$27,10
$31,90
-16%
ADD TO BASKET
| Operating Mode | Mechanical |
| Supplementary Article/Supplementary Info | with gasket/seal, do not use sealant |
| Number of blades/vanes | 6 |
| Impeller Ø | 66mm |
| Water pump impeller material | Metal |
$27,20
$32,00
-16%
ADD TO BASKET
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Number of blades/vanes | 6 |
| Weight | 0.648kg |
| Supplementary Article/Supplementary Info | with gaskets/seals |
$28,90
$34,00
-16%
ADD TO BASKET
| Ø | 60mm |
| Width | 34mm |
| Vehicle Identification Number (VIN) from | YD471565 |
| Engine no. up to | 8367 |
| Fitting Position | Right |
| Vehicle Equipment | for vehicles with air conditioning |
$29,20
$34,30
-15%
ADD TO BASKET
| Width | 34mm |
| Outer Diameter | 60mm |
| Weight | 0.415kg |
$30,20
$35,50
-15%
ADD TO BASKET
| Ø | 60mm |
| Width | 34mm |
| Tensioner Pulley Actuation | Manual |
| Vehicle Identification Number (VIN) from | YD471565 |
| Engine no. up to | 5048 |
| Fitting Position | Left |
| Driven units | Camshaft |
| Vehicle Equipment | for vehicles without air conditioning |
| More information » | |
$30,60
$36,00
-15%
ADD TO BASKET
| Weight | 0.7kg |
$33,10
$38,90
-15%
ADD TO BASKET
| Water Pump Type | for V-ribbed belt use |
| Water pump impeller material | Sheet Steel |
| Supplementary Article/Supplementary Info | with gaskets/seals |
$35,60
$41,80
-15%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Colour | black |
| Number of Teeth | 112 |
| Width | 30mm |
| Tooth Pitch | 9.525mm |
| Length | 1, 067mm |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT4406A |
| More information » | |
$37,90
$44,50
-15%
ADD TO BASKET
| Packaging length | 26.5cm |
| Packaging width | 16.5cm |
| Packaging height | 7cm |
| Weight | 0.66kg |
| Number of Teeth | 78 |
| Width | 24mm |
| Driven units | Injection pump |
| Vehicle Identification Number (VIN) from | YD471565 |
| Engine no. from | 8368 |
| More information » | |
$39,80
$46,80
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
