Sensors SEAT ALTEA XL (5P5, 5P8) 1.4 16V (63kW / 86hp) 2006 - 2015
Previous 1 2 3 ... 14 15 16 17 Next
| Warranty | 5 years warranty |
| Engine Code | BXW |
| Construction Year to | 07.2009 |
30,60€
35,90€
-15%
ADD TO BASKET
30,60€
36,00€
-15%
ADD TO BASKET
| Measuring Range from | 10kPa |
| Measuring Range to | 117kPa |
| Supplementary Article/Info 2 | with integrated air temperature sensor |
| Engine Code | BXW |
30,70€
36,20€
-16%
ADD TO BASKET
| Fitting Position | Rear, Front |
| Length | 33.5mm |
| Width | 45mm |
| Height | 47mm |
| Colour | black |
| Shape | angled |
| Sensor Type | Ultrasonic Sensor |
| Supplementary Article/Supplementary Info | with seal |
| Number of connectors | 3 |
| Chemical Properties | Over-paintable |
| Housing Colour | black |
| Weight | 0.04kg |
| More information » | |
31,00€
36,50€
-16%
ADD TO BASKET
| Plug Type | Blade Terminal |
| Connector Shape | oval |
| Number of connectors | 3 |
31,10€
36,50€
-15%
ADD TO BASKET
| Lambda Sensor | Unheated, Diagnostic Probe |
| Number of pins | 4-pin connector |
| Connector Shape | D Shape |
| Socket colour | black |
| Cable Length | 920mm |
| Engine Code | BXW, CGGB |
| Exhaust System | after catalytic converter |
| More information » | |
31,10€
36,60€
-16%
ADD TO BASKET
| Cable Length | 480mm |
| Lambda Sensor | Planar probe, Heated, Diagnostic Probe |
| Fitting Position | after catalytic converter |
31,40€
36,90€
-15%
ADD TO BASKET
| Resistor | 9Ohm |
| Conductor Number | 4conductor |
| Length | 721mm |
| Number of circuits | 4 |
| Cable Length | 721mm |
| Lambda Sensor | Heated |
32,60€
38,30€
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Supplementary Article/Supplementary Info | with seal |
| Length | 6cm |
| Construction Year to | 12.2012 |
33,10€
38,90€
-15%
ADD TO BASKET
| Voltage | 12V |
| Corresponds to the original part in colour | black |
| Sensor Type | Hall Sensor |
| Number of pins | 3-pin connector |
| Supplementary Article/Info 2 | without cable |
| Assy./disassy. by qualified personnel required! | |
| Engine Code | BXW |
| More information » | |
33,20€
ADD TO BASKET
| Cable Length | 513mm |
| Lambda Sensor | Finger probe, Heated, Regulating Probe |
| Fitting Position | before catalytic converter |
| Engine Code | BXW |
34,20€
40,20€
-15%
ADD TO BASKET
| Sensor Type | Ultrasonic Sensor |
| Supplementary Article/Supplementary Info | with seal |
| Shape | angled |
| Chemical Properties | Paintable |
| Rated Voltage | 12V |
| Number of connectors | 3 |
| Colour | black |
| SVHC | No SVHC present! |
| Construction Year to | 04.2010 |
| Fitting Position | Front |
| More information » | |
34,90€
41,00€
-15%
ADD TO BASKET
| Lambda Sensor | Heated, Diagnostic Probe |
| External Thread Size | M18 x 1,5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 570mm |
| Weight | 0.106kg |
35,20€
41,40€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
35,80€
42,10€
-15%
ADD TO BASKET
| Length | 29.53Inch |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| Lambda Sensor | Lambda Sensor |
| Specification | Isolated Ground, Planar Type, Zirconia Type |
| Available as universal article as well, see article no. | OS-15P |
| Engine Code | BXW, CGGB |
| for OE No. | 04C906262D, 06E906265E, 06E906265P |
| Exhaust System | after catalytic converter |
| More information » | |
35,90€
42,20€
-15%
ADD TO BASKET
| Number of connectors | 3 |
| Plug Type | Blade Terminal |
| Connector Shape | oval |
| Weight | 0.1kg |
36,60€
43,00€
-15%
ADD TO BASKET
| Colour | black |
| Supplementary Article/Supplementary Info | with seal |
| Number of pins | 3-pin connector |
| Connector Shape | D Shape |
| Num. of holes | 3 |
36,80€
43,30€
-16%
ADD TO BASKET
| Lambda Sensor | Diagnostic Probe, Heated |
| Voltage | 12V |
| Length | 595mm |
| Number of circuits | 4 |
| Weight | 0.13kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| More information » | |
37,30€
43,80€
-15%
ADD TO BASKET
| Surface | primed |
| Supplementary Article/Info 2 | with plug |
| Number of pins | 3-pin connector |
| Supplementary Article/Supplementary Info | with shrink squeeze connector, with cable set, with seal |
| Fitting Position | Front, Rear |
| Length | 33.5mm |
| Width | 45mm |
| Height | 47mm |
| Colour | black |
| Shape | angled |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Over-paintable |
| Housing Colour | black |
| Weight | 0.076kg |
| for OE No. | 3D0 998 275 A |
| Quantity required | 4 |
| Engine Code | BXW |
| Vehicle Identification Number (VIN) to | 5P-8-032 700 |
| More information » | |
38,10€
44,80€
-15%
ADD TO BASKET
| Fitting Position | Right Rear |
| Lambda Sensor | Heated |
38,90€
45,70€
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with cable set, with shrink squeeze connector, with seal |
| Supplementary Article/Info 2 | with plug |
| Fitting Position | both sides |
| Colour | black |
| Shape | angled |
| Sensor Type | Ultrasonic Sensor |
| Surface | primed |
| Number of pins | 3-pin connector |
| Chemical Properties | Paintable |
| Weight | 0.048kg |
| Number of sensors | 1 |
| Construction Year from | 03.2009 |
| More information » | |
39,40€
46,40€
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Connector Shape | D Shape |
| for OE No. | 03C 906 262 T |
| Weight | 0.131kg |
| Thread Size | M18 x 1,5 |
| Number of circuits | 4 |
| Socket colour | brown |
| Total Length | 400mm |
| Number of pins | 4-pin connector |
| Number of connectors | 4 |
| Lambda Sensor | Regulating Probe, Thread pre-greased |
| Exhaust System | before catalytic converter |
| Fitting Position | Exhaust Manifold |
| More information » | |
39,90€
47,00€
-16%
ADD TO BASKET
| Sensor Type | Ultrasonic Sensor |
| Fitting Position | Front, Rear, outer, inner, Left, Right |
| Chemical Properties | Paintable |
| Length | 31mm |
| Width | 22mm |
| Height | 35.9mm |
| Number of pins | 3-pin connector |
| Ø | 15.5mm |
| Weight | 0.026kg |
| Construction Year to | 05.2013 |
| More information » | |
40,60€
47,70€
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Thread Size | M18 x 1,5 |
| Cable Length | 600mm |
| Conductor Number | 4conductor |
| Connector Shape | D Shape |
| Length | 520mm |
| Number of pins | 4-pin connector |
| Number of connectors | 4 |
| Housing Colour | black |
| Lambda Sensor | Heated, Thread pre-greased |
| Weight | 0.12kg |
| More information » | |
41,00€
48,30€
-16%
ADD TO BASKET
| Number of pins | 10-pin connector |
| Colour | black |
| Material | Plastic |
41,40€
48,60€
-15%
ADD TO BASKET
| Sensor Type | Ultrasonic Sensor |
| Fitting Position | Front, Rear, outer, inner, Left, Right |
| Chemical Properties | Paintable |
| Length | 41mm |
| Width | 22mm |
| Height | 26.3mm |
| Number of pins | 3-pin connector |
| Ø | 15.5mm |
| Weight | 0.03kg |
| Construction Year to | 05.2013 |
| More information » | |
41,60€
49,00€
-16%
ADD TO BASKET
42,70€
50,20€
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Chemical Properties | Paintable |
| Mounting Type | Plugged |
| Socket colour | black |
| Shape | angled |
| Supplementary Article/Supplementary Info | with fastening ring |
| Shaft form | round |
| Assy./disassy. by qualified personnel required! | |
| Construction Year from | 03.2009 |
| Quantity required | 4 |
| Fitting Position | both sides, Front |
| for PR number | 7X2 |
| Vehicle Identification Number (VIN) from | 5P_9_500 001 |
| More information » | |
43,00€
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Weight | 0.142kg |
| Number of circuits | 4 |
| Connector Shape | D Shape |
| Thread Size | M18 x 1,5 |
| for OE No. | 036 906 262 AA |
| Socket colour | brown |
| Length | 520mm |
| Number of pins | 4-pin connector |
| Number of connectors | 4 |
| Housing Colour | brown |
| Lambda Sensor | Regulating Probe, Thread pre-greased |
| Exhaust System | before catalytic converter |
| Engine Code | BXW, CGGB |
| Fitting Position | Front |
| More information » | |
43,70€
51,40€
-15%
ADD TO BASKET
| Voltage | 12V |
| Number of connectors | 10 |
| Observe service information | |
43,80€
51,50€
-15%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
