Sensors SKODA KODIAQ I (NS6, NS7, NV7) 2.0 TSI 4x4 (132kW / 180hp) 2016 - ...
Previous 1 2 3 ... 9 10 11 12 Next
| Fitting Position | Rear |
| Colour | black |
| Sensor Type | Ultrasonic Sensor |
| Number of pins | 3-pin connector |
| Chemical Properties | Over-paintable |
| Connector Shape | oval |
$41,30
$48,60
-16%
ADD TO BASKET
| Guarantee | 3 years guarantee |
| New Part | |
| Used part return not required | |
| Weight | 0.23kg |
| Always compare old and new part (in particular OE No.) | |
$42,30
$49,80
-16%
ADD TO BASKET
| Length | 70mm |
| Width | 50mm |
| Height | 25mm |
| Weight | 0.02kg |
$42,40
$49,90
-16%
ADD TO BASKET
| Fuel Type | Diesel |
| for OE No. | 06L906054E |
$44,90
$52,80
-15%
ADD TO BASKET
| Vehicle Equipment | for vehicles with tyre-pressure monitoring system |
$46,60
$54,80
-15%
ADD TO BASKET
| Number of pins | 4-pin connector |
| Supplementary Article/Info 2 | with integrated air temperature sensor |
$46,70
$54,90
-15%
ADD TO BASKET
$47,30
$55,70
-16%
ADD TO BASKET
| Programmed | |
| Tightening Torque | 4Nm |
| Assy./disassy. by qualified personnel required! | |
$48,20
$56,80
-16%
ADD TO BASKET
| can be programmed | |
| Colour | black |
| Frequency Range | 433MHz |
| Material | Rubber |
| Construction Year to | 06.2024 |
| Supplementary Article/Supplementary Info | with gasket/seal |
| Number of mounting bores | 3 |
| Connector Shape | D Shape |
| Assy./disassy. by qualified personnel required! | |
$49,00
$57,60
-15%
ADD TO BASKET
| Fitting Position | Oil Sump |
| Number of pins | 3-pin connector |
| Connector Shape | D Shape |
| Supplementary Article/Info 2 | with seal ring |
| Seal Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of mounting bores | 3 |
| Housing Type | Synthetic Material Housing |
| Housing Colour | black |
| Observe system fill quantity | |
| More information » | |
$49,50
$58,20
-15%
ADD TO BASKET
| Cable Length | 570mm |
| Oxygen Sensor | Broadband Oxygen Sensor, Heated, Regulating Sensor |
| Fitting Position | before catalytic converter |
| Alternatively | |
$49,60
$58,40
-16%
ADD TO BASKET
| Cable Length | 585mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor |
| Fitting Position | before catalytic converter |
$49,90
$58,70
-15%
ADD TO BASKET
| Housing Type | Synthetic Material Housing |
| Number of pins | 3-pin connector |
| Ø | 36mm |
| Length | 69mm |
| Width | 44mm |
| Height | 16mm |
| Connector Shape | angular |
| Glazing | with rain sensor, with humidity sensor |
| Supplementary Article/Info 2 | with adhesive film |
| for manufacturer | TRW |
| Always compare old and new part (in particular OE No.) | |
| Production date to | 12.08.2019 |
| for PR number | 8N6 |
| More information » | |
$49,90
$58,70
-15%
ADD TO BASKET
| can be programmed | |
| Colour | silver |
| Frequency Range | 433MHz |
| Material | Steel |
| Construction Year to | 06.2024 |
| Number of pins | 3-pin connector |
| Assy./disassy. by qualified personnel required! | |
$51,60
$60,70
-15%
ADD TO BASKET
$53,00
$62,30
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Thread pre-greased, Diagnostic Probe |
| Number of circuits | 4 |
| Cable Length | 695mm |
| Thread Size | M18x1, 5 |
| SVHC | No SVHC present! |
$55,90
$65,80
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Fitting Position | Front |
$56,80
$66,80
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with holder |
| Glazing | with rain sensor |
| Shape | round |
| for manufacturer | TRW |
| Number of pins | 3-pin connector |
| Supplementary Article/Info 2 | with adhesive film |
$58,50
$68,80
-15%
ADD TO BASKET
| for manufacturer number | 1040008 |
$58,90
$69,30
-16%
ADD TO BASKET
| Glazing | with rain/light sensor, without a moisture sensor |
| for manufacturer | TRW |
| Article number of recommended accessories | 8U0 907 671 Klammer, 7N0 955 609 Gel |
| Number of pins | 3-pin connector |
| Number of pins | 3-pin connector |
| Guarantee | 3 years guarantee |
| Weight | 0.13kg |
| Always compare old and new part (in particular OE No.) | |
| for PR number | TD3 |
$63,00
$74,10
-15%
ADD TO BASKET
| Colour | silver |
| Tightening Torque | 4Nm |
| Mounting Type | Bolted |
| Valve Type | Air Valve |
| Vehicle Equipment | for vehicles with tyre-pressure monitoring system |
| Supplementary Article/Info 2 | with valves, with screw |
| Frequency Range | 433MHz |
| Full Set | |
| Recommended change interval | 160, 000km, 5Years |
| Valve Stem Material | Aluminium |
| Supplementary Article/Supplementary Info | with mounting tool |
| Observe the vehicle manufacturer specifications | |
| More information » | |
$65,90
$77,50
-15%
ADD TO BASKET
$66,80
$78,60
-16%
ADD TO BASKET
| Housing Type | Synthetic Material Housing |
| Number of pins | 3-pin connector |
| Fitting Depth | 100mm |
| Housing Colour | black |
| Connector Shape | D Shape |
| Number of mounting bores | 3 |
| Supplementary Article/Info 2 | with seal ring |
| Seal Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of connectors | 3 |
| SVHC | No SVHC present! |
| for PR number | TD3 |
| More information » | |
$67,80
$79,70
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with gasket/seal |
| Number of pins | 3-pin connector |
| Fitting Depth | 100mm |
| Number of mounting bores | 3 |
| Shape | D Shape |
$68,50
$80,60
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
| for PR number | TD3 |
$68,90
$81,10
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Thread pre-greased, Regulating Sensor |
| Number of circuits | 5 |
| Cable Length | 785mm |
| Thread Size | M18x1, 5 |
| SVHC | No SVHC present! |
$69,30
$81,50
-15%
ADD TO BASKET
| Fabrication Number | EPP-VW-004 |
$70,30
$82,70
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
