Sensors SKODA OCTAVIA III (5E3, NL3, NR3) 1.2 TSI (77kW / 105hp) 2012 - 2021
Previous 1 2 3 ... 9 10 11 12 Next
| Number of pins | 3-pin connector |
| Connector Shape | oval |
| Socket colour | black |
| Rated Voltage | 12V |
| SVHC | No SVHC present! |
| for PR number | TP1 |
35,10€
41,30€
-16%
ADD TO BASKET
| Lambda Sensor | Diagnostic Probe |
| Voltage | 12V |
| Length | 1,000mm |
| Number of circuits | 4 |
| Weight | 0.15kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| More information » | |
35,40€
41,60€
-15%
ADD TO BASKET
| Cable Length | 800mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 1.997.007 |
| Number of circuits | 4 |
| Engine Code | CJZA |
| Fitting Position | after catalytic converter |
| Emission Standard | Euro 5+, Euro 6+ |
| Quantity required | 1 |
| for PR number | 7MJ, 7MM |
| More information » | |
35,40€
41,60€
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
35,40€
41,60€
-15%
ADD TO BASKET
| Voltage | 12V |
| Number of pins | 3-pin connector |
| Weight | 0.11kg |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| Construction Year from | 02.2015 |
36,20€
42,60€
-16%
ADD TO BASKET
| Lambda Sensor | Diagnostic Probe, Heated |
| Voltage | 12V |
| Length | 595mm |
| Number of circuits | 4 |
| Weight | 0.13kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| More information » | |
37,10€
43,60€
-15%
ADD TO BASKET
| Housing Type | Synthetic Material Housing |
| Number of pins | 3-pin connector |
| Ø | 34mm |
| Length | 69mm |
| Width | 46mm |
| Height | 13mm |
| Connector Shape | angular |
| Glass | with humidity sensor |
| Supplementary Article/Info 2 | with adhesive film |
| for manufacturer | VALEO |
| for combined PR number | 8N4+9AK |
| More information » | |
38,10€
44,90€
-16%
ADD TO BASKET
| Lambda Sensor | Heated, Thread pre-greased, Diagnostic Probe |
| Number of circuits | 4 |
| Cable Length | 400mm |
| Thread Size | M18x1,5 |
| SVHC | No SVHC present! |
| Construction Year from | 08.2015 |
39,60€
46,50€
-15%
ADD TO BASKET
| Fitting Position | Front |
| Supplementary Article/Info 2 | without sensor |
| Component No. | 120-00-036 |
40,20€
47,30€
-16%
ADD TO BASKET
| Cable Length | 800mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 10.7007 |
| Number of circuits | 4 |
| Engine Code | CJZA |
| Fitting Position | after catalytic converter |
| Emission Standard | Euro 5+, Euro 6+ |
| Quantity required | 1 |
| for PR number | 7MJ, 7MM |
| More information » | |
40,80€
48,00€
-15%
ADD TO BASKET
| Colour | black |
| Shape | angled |
| Sensor Type | Ultrasonic Sensor |
| Supplementary Article/Supplementary Info | with seal |
| Number of connectors | 3 |
| Chemical Properties | Paintable |
| Housing Colour | brown |
| Weight | 0.018kg |
| Fitting Position | Left Front, Right Front |
| More information » | |
41,00€
48,30€
-16%
ADD TO BASKET
| Fitting Position | Front |
| Supplementary Article/Info 2 | without sensor |
| Component No. | 120-00-035 |
41,30€
48,50€
-15%
ADD TO BASKET
| Supplementary Article/Info 2 | without cable |
| MAPP code available | |
| Construction Year from | 02.2013 |
| Quantity required | 2 |
| Fitting Position | Rear Axle |
| Vehicle Equipment | for vehicles with parking assistant system |
41,30€
48,60€
-16%
ADD TO BASKET
| Housing Type | Synthetic Material Housing |
| Number of pins | 3-pin connector |
| Ø | 34mm |
| Length | 70mm |
| Width | 48mm |
| Height | 16mm |
| Connector Shape | angular |
| Glass | with rain sensor |
| Supplementary Article/Info 2 | with adhesive film |
| for manufacturer | TRW |
| Always compare old and new part (in particular OE No.) | |
| for combined PR number | 8N4+9AC, 8N4+KH6, 8N6+9AC, 8N6+KH6 |
| More information » | |
41,60€
48,90€
-15%
ADD TO BASKET
| Supplementary Article/Info 2 | Aluminium Pedal Cover |
| Number of mounting bores | 1 |
| Number of pins | 6-pin connector |
| Transmission Type | Automatic Transmission |
| Left-/right-hand drive vehicles | for left-hand drive vehicles |
| Material | Aluminium |
| Assy./disassy. by qualified personnel required! | |
| More information » | |
42,00€
49,40€
-15%
ADD TO BASKET
| to | 9bar |
| Supplementary Article/Info 2 | with pressure sensor, with integrated air temperature sensor, with valves, with screw |
| Supplementary Article/Supplementary Info | with battery |
| Colour | grey |
| Weight | 36g |
| Supported by | De-Minimis |
| Valve colour | black |
| Number of valves | 1 |
| Material | Rubber/Metal |
| Frequency Range | 433MHz, 434MHz |
| Article number of the recommended special tool | 95990021 |
| only with | 95990021 |
| Number of bolts/screws | 1 |
| Power consumption | 0.001W |
| SVHC | No SVHC present! |
| Observe technical data | |
| More information » | |
42,10€
49,50€
-15%
ADD TO BASKET
| Cable Length | 540mm |
| Lambda Sensor | Broadband lambda sensor, Heated, Diagnostic Probe |
| Fitting Position | after catalytic converter |
| for PR number | 7MJ, 7MM |
45,40€
53,50€
-16%
ADD TO BASKET
| Cable Length | 650mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Regulating Probe |
| Available as universal article as well, see article no. | 1.997.007 |
| Number of circuits | 4 |
| Engine Code | CJZA |
| Construction Year to | 05.2015 |
| for PR number | 7MJ |
| Fitting Position | before catalytic converter |
| Emission Standard | Euro 5+ |
| Quantity required | 1 |
| More information » | |
46,70€
54,90€
-15%
ADD TO BASKET
| Sensor Type | Ultrasonic Sensor |
| Fitting Position | Front, Rear, outer, inner, Left, Right |
| Chemical Properties | Paintable |
| Length | 32mm |
| Width | 23mm |
| Height | 35.9mm |
| Number of pins | 3-pin connector |
| Ø | 15.5mm |
| Weight | 0.03kg |
| More information » | |
47,00€
55,30€
-16%
ADD TO BASKET
| Sensor Length | 80mm |
| Engine Code | CJZA |
| Housing Colour | black |
47,10€
55,40€
-15%
ADD TO BASKET
| Sensor Type | Ultrasonic Sensor |
| Fitting Position | Front, Rear, outer, Longitudinal, inner, Left, Right |
| Chemical Properties | Paintable |
| Length | 41mm |
| Width | 23mm |
| Height | 28.7mm |
| Number of pins | 3-pin connector |
| Ø | 15.5mm |
| Weight | 0.029kg |
| More information » | |
48,60€
57,10€
-15%
ADD TO BASKET
49,30€
57,90€
-15%
ADD TO BASKET
| Sensor Type | Ultrasonic Sensor |
| Fitting Position | Front, Rear, lateral installation, Longitudinal, Left, Right |
| Chemical Properties | Paintable |
| Length | 41mm |
| Width | 23mm |
| Height | 28.7mm |
| Number of pins | 3-pin connector |
| Ø | 15.5mm |
| Weight | 0.028kg |
| More information » | |
50,90€
59,80€
-15%
ADD TO BASKET
| Cable Length | 570mm |
| Lambda Sensor | Planar probe, Heated, Regulating Probe |
| Construction Year to | 05.2015 |
| Fitting Position | before catalytic converter |
| for PR number | 7MJ |
50,90€
59,80€
-15%
ADD TO BASKET
| Housing Type | Synthetic Material Housing |
| Number of pins | 3-pin connector |
| Ø | 36mm |
| Length | 69mm |
| Width | 44mm |
| Height | 16mm |
| Connector Shape | angular |
| Glass | with rain sensor, with humidity sensor |
| Supplementary Article/Info 2 | with adhesive film |
| for manufacturer | TRW |
| Always compare old and new part (in particular OE No.) | |
| for combined PR number | 8K3+9AK, 8N4+9AK, 8N6+9AK |
| More information » | |
52,80€
62,20€
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Connector Shape | D Shape |
| Number of mounting bores | 3 |
| for OE No. | 04E 907 660 D |
| Quality | OE EQUIVALENT |
52,90€
62,30€
-16%
ADD TO BASKET
| Cable Length | 475mm |
| Lambda Sensor | Planar probe, Heated, Regulating Probe |
| Construction Year from | 06.2015 |
| Fitting Position | before catalytic converter |
| for PR number | 7MJ, 7MM |
53,40€
62,90€
-16%
ADD TO BASKET
| Lambda Sensor | Finger probe |
| Thread Size | M18 x 1,5 |
| Cable Length | 800mm |
| Number of pins | 4-pin connector |
| Fitting Position | after catalytic converter |
54,00€
63,50€
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with holder |
| Glass | with rain sensor |
| Shape | round |
| for manufacturer | TRW |
| Number of pins | 3-pin connector |
| Supplementary Article/Info 2 | with adhesive film |
54,20€
63,80€
-16%
ADD TO BASKET
| for OE No. | 04E906262 |
| Quality | OE |
| for manufacturer | DENSO |
| Thread Size | M18x1.5 |
| Cable Length | 570mm |
| Number of pins | 4-pin connector |
| Weight | 96g |
| Lambda Sensor | Heated, Finger probe, Lambda Sensor, Regulating Probe |
| Gross Weight | 127g |
| Construction Year to | 05.2015 |
| Exhaust System | for pre-catalytic converter |
| More information » | |
54,30€
63,90€
-16%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
