Sensor / Probe SKODA OCTAVIA III Combi (5E5, 5E6) 1.2 TSI (63kW / 86hp) 2012 - 2020
Previous 1 2 Next
polcar e14 0016
e14 0016
5901532877212
1628sw 6001549007 6001549060 7700107434 8200052063 8201071311 9639853680
e14 0016
5901532877212
1628sw 6001549007 6001549060 7700107434 8200052063 8201071311 9639853680
polcar e14 0024
e14 0024
5901532877298
06b906265b
e14 0024
5901532877298
06b906265b
| Lambda Sensor | Finger probe |
| Thread Size | M18 x 1,5 |
| Cable Length | 800mm |
| Number of pins | 4-pin connector |
| Weight | 0.13kg |
| Warranty | 3 years warranty |
| Engine Code | CJZB |
| Exhaust System | after catalytic converter |
| More information » | |
22,30€
26,20€
-15%
ADD TO BASKET
| Lambda Sensor | Diagnostic Probe |
| Cable Length | 970mm |
| Exhaust System | after catalytic converter |
| Conductor Number | 4conductor |
| Warranty | 3 years warranty |
23,10€
27,10€
-15%
ADD TO BASKET
| Resistor | 3.5Ohm |
| Length | 571mm |
| Conductor Number | 4conductor |
| Number of circuits | 4 |
| Cable Length | 571mm |
| Lambda Sensor | Heated |
23,60€
27,80€
-16%
ADD TO BASKET
| Lambda Sensor | Diagnostic Probe, Heated |
| Fitting Position | after catalytic converter |
| Rated Voltage | 12V |
| Number of pins | 4-pin connector |
| Connector Shape | D Shape |
| Cable Length | 837mm |
| Total Length | 870mm |
| Spanner Size | 22 |
| Thread Size | M 18 |
| Thread Pitch | 1.5mm |
| Thread Length | 9mm |
| Supplementary Article/Info 2 | with cable, with heat shield pipe |
| Lubrication | with grease lubrication |
| More information » | |
24,80€
29,20€
-16%
ADD TO BASKET
| Lambda Sensor | Regulating Probe, Thread pre-greased |
| Thread Size | M18x1.5 |
| Cable Length | 570mm |
| Number of pins | 4-pin connector |
| Fitting Position | before catalytic converter |
| Fabrication Number | ESL-AU-016 |
27,20€
32,00€
-16%
ADD TO BASKET
| Quality | OE |
| for manufacturer | DENSO |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| Weight | 95g |
| Lambda Sensor | Heated, Finger probe, Lambda Sensor, Regulating Probe |
| Gross Weight | 139g |
| Construction Year to | 05.2015 |
| Exhaust System | for pre-catalytic converter |
| More information » | |
31,30€
36,80€
-15%
ADD TO BASKET
| Lambda Sensor | Diagnostic Probe |
| Voltage | 12V |
| Length | 1,000mm |
| Number of circuits | 4 |
| Weight | 0.15kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| More information » | |
35,10€
41,30€
-16%
ADD TO BASKET
| Cable Length | 800mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 1.997.007 |
| Number of circuits | 4 |
| Engine Code | CJZB |
| for PR number | 7MJ |
| Fitting Position | after catalytic converter |
| Emission Standard | Euro 5+ |
| Quantity required | 1 |
| More information » | |
35,40€
41,60€
-15%
ADD TO BASKET
| Lambda Sensor | Diagnostic Probe, Heated |
| Voltage | 12V |
| Length | 595mm |
| Number of circuits | 4 |
| Weight | 0.13kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| More information » | |
36,80€
43,30€
-16%
ADD TO BASKET
| Cable Length | 800mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 10.7007 |
| Number of circuits | 4 |
| Engine Code | CJZB |
| for PR number | 7MJ |
| Fitting Position | after catalytic converter |
| Emission Standard | Euro 5+ |
| Quantity required | 1 |
| More information » | |
40,80€
48,00€
-15%
ADD TO BASKET
| Lambda Sensor | Heated, Regulating Probe |
| External Thread Size | M18 x 1,5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 755mm |
| Weight | 0.121kg |
| Engine Code | CJZB |
| Construction Year to | 05.2015 |
| Fitting Position | before catalytic converter |
| More information » | |
42,30€
49,70€
-15%
ADD TO BASKET
| Cable Length | 650mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Regulating Probe |
| Available as universal article as well, see article no. | 1.997.007 |
| Number of circuits | 4 |
| Engine Code | CJZB |
| Construction Year to | 05.2015 |
| for PR number | 7MJ |
| Fitting Position | before catalytic converter |
| Emission Standard | Euro 5+ |
| Quantity required | 1 |
| More information » | |
46,30€
54,50€
-16%
ADD TO BASKET
| Lambda Sensor | Heated, Regulating Probe |
| Number of circuits | 4 |
| Length | 836mm |
| Engine Code | CJZB |
| Construction Year to | 05.2015 |
| Emission Standard | Euro 5 |
| for PR number | 0GV, 7GR, 7MJ |
| More information » | |
50,10€
59,00€
-16%
ADD TO BASKET
| Cable Length | 570mm |
| Lambda Sensor | Planar probe, Heated, Regulating Probe |
| Construction Year to | 05.2015 |
| Fitting Position | before catalytic converter |
| Engine Code | CJZB |
| for PR number | 7MJ |
50,90€
59,80€
-15%
ADD TO BASKET
| Cable Length | 685mm |
| Lambda Sensor | Planar probe, Heated, Regulating Probe |
| Construction Year from | 06.2015 |
| Construction Year to | 08.2015 |
| Fitting Position | before catalytic converter |
| Engine Code | CYVA |
| for PR number | 7MM |
| More information » | |
52,60€
61,90€
-16%
ADD TO BASKET
| Cable Length | 475mm |
| Lambda Sensor | Planar probe, Heated, Regulating Probe |
| Construction Year from | 06.2015 |
| Fitting Position | before catalytic converter |
| Engine Code | CJZB, CYVA |
| for PR number | 7MJ, 7MM |
53,40€
62,90€
-16%
ADD TO BASKET
| Lambda Sensor | Finger probe |
| Thread Size | M18 x 1,5 |
| Cable Length | 800mm |
| Number of pins | 4-pin connector |
| Fitting Position | after catalytic converter |
| Engine Code | CJZB |
54,00€
63,50€
-15%
ADD TO BASKET
| for OE No. | 04E906262 |
| Quality | OE |
| for manufacturer | DENSO |
| Thread Size | M18x1.5 |
| Cable Length | 570mm |
| Number of pins | 4-pin connector |
| Weight | 96g |
| Lambda Sensor | Heated, Finger probe, Lambda Sensor, Regulating Probe |
| Gross Weight | 127g |
| Construction Year to | 05.2015 |
| Exhaust System | for pre-catalytic converter |
| More information » | |
54,30€
63,90€
-16%
ADD TO BASKET
| Cable Length | 540mm |
| Lambda Sensor | Broadband lambda sensor, Heated, Diagnostic Probe, Diagnostic Probe |
| Fitting Position | after catalytic converter, after catalytic converter |
| Engine Code | CJZB, CJZB, CYVA |
| for PR number | 7MJ, 7MM |
| Block Separation | |
| Construction Year to | 05.2015 |
| More information » | |
59,00€
69,50€
-16%
ADD TO BASKET
| Fitting Position | Front |
| Lambda Sensor | Finger probe |
61,70€
72,60€
-16%
ADD TO BASKET
| Quality | OE |
| for manufacturer | DENSO |
| Thread Size | M18x1.5 |
| Cable Length | 770mm |
| Number of pins | 4-pin connector |
| Weight | 107g |
| Lambda Sensor | Heated, Finger probe, Lambda Sensor, Diagnostic Probe |
| Gross Weight | 138g |
| Engine Code | CJZB |
| Construction Year to | 05.2015 |
| for OE No. | 04E906262M |
| More information » | |
61,70€
72,60€
-16%
ADD TO BASKET
| Lambda Sensor | Heated, Diagnostic Probe |
| Number of pins | 4-pin connector |
| Connector Shape | D Shape |
| Socket colour | black |
| Cable Length | 640mm |
| for OE No. | 04E 906 262 A |
| for Art.No. | 81847E |
| Quality | OE EQUIVALENT |
| Engine Code | CJZB |
| Construction Year from | 06.2013 |
| Fitting Position | after catalytic converter |
| More information » | |
64,40€
75,80€
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Total Length | 590mm |
| Engine Code | CYVA |
| Construction Year from | 02.2017 |
| Lambda Sensor | Regulating Probe |
| Fitting Position | before catalytic converter |
67,30€
79,20€
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Total Length | 800mm |
| Engine Code | CYVA |
| Construction Year from | 02.2017 |
| Lambda Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
77,60€
91,30€
-16%
ADD TO BASKET
| Lambda Sensor | Heated, Diagnostic Probe |
| Number of circuits | 4 |
| Length | 1,041mm |
| Engine Code | CJZB |
| Construction Year to | 05.2015 |
78,90€
92,80€
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Connector Shape | D Shape |
| Socket colour | black |
| for OE No. | 04E 906 262 K |
| Weight | 0.117kg |
| Length | 720mm |
| Number of pins | 4-pin connector |
| Lambda Sensor | Finger probe, Diagnostic Probe, Thread pre-greased |
| Number of circuits | 4 |
| Exhaust System | after catalytic converter |
| Engine Code | CJZB |
| Construction Year from | 06.2013 |
| More information » | |
83,30€
98,00€
-15%
ADD TO BASKET
| Engine Code | CJZB |
| Construction Year to | 05.2015 |
| Lambda Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
93,60€
110,20€
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Connector Shape | D Shape |
| Conductor Number | 4conductor |
| Exhaust System | after catalytic converter |
| Cable Length | 450mm |
| Lambda Sensor | Thread pre-greased, Regulating Probe |
| Construction Year to | 05.2015 |
| Fitting Position | Exhaust Manifold |
| More information » | |
95,10€
111,90€
-16%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
