Lambda Control SUZUKI BALENO (EG) 1.8 GTX (SY418) (89kW / 121hp) 1995 - 2009
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-SK-000 |
| Country Specific Design | Great Britain, Germany, Hongkong |
| Vehicle Identification Number (VIN) from | 200001 |
$18,80
$22,10
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Number of circuits | 4 |
$20,50
$24,10
-15%
ADD TO BASKET
| Weight | 0.175kg |
| Number of connectors | 4 |
| Oxygen Sensor | Heated |
| Overall Length | 470mm |
$20,90
$24,60
-16%
ADD TO BASKET
| Oxygen Sensor | Planar Sensor, Heated |
| Cable Length | 210mm |
| Number of pins | 4-pin connector |
$23,50
$27,70
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Guarantee | 3 years guarantee |
| Weight | 0.12kg |
| Always compare old and new part (in particular OE No.) | |
$26,70
$31,40
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe |
| Fabrication Number | ESL-SK-004 |
| Cable Length | 545mm |
$28,70
$33,80
-16%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Number of circuits | 4 |
| Engine Code | J18A |
| Exhaust System | before catalytic converter |
| Vehicle Identification Number (VIN) from | *00200001 |
$29,80
$35,00
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 103g |
| Gross Weight | 152g |
| Vehicle Identification Number (VIN) to | S00200000 |
| Transmission Type | Manual Transmission |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$30,00
$35,20
-15%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Diagnostic Probe |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Transmission Type | Manual Transmission |
| Engine Code | J18A |
| Vehicle Identification Number (VIN) from | 00200001 |
$30,10
$35,40
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Guarantee | 3 years guarantee |
| Weight | 0.12kg |
| Always compare old and new part (in particular OE No.) | |
$31,00
$36,40
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 95g |
| Gross Weight | 139g |
| Vehicle Identification Number (VIN) from | S00200001 |
| Transmission Type | Manual Transmission |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$33,80
$39,70
-15%
ADD TO BASKET
| Oxygen Sensor | Heated |
| External Thread Size | M18 x 1, 5 |
| Number of circuits | 4 |
| Fitting Position | before catalytic converter |
| Cable Length | 450mm |
| Weight | 0.001kg |
| Observe service information | |
| Vehicle Identification Number (VIN) from | JSAEG**1S001*0001 |
| More information » | |
$34,60
$40,70
-15%
ADD TO BASKET
| Cable Length | 350mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor |
| Country Specific Design | Great Britain, Germany, Hongkong |
| Fitting Position | before catalytic converter |
| Vehicle Identification Number (VIN) from | 200001 |
| Block Separation | |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$34,90
$41,00
-15%
ADD TO BASKET
| Oxygen Sensor | Heated |
| External Thread Size | M18 x 1, 5 |
| Weight | 0.1kg |
| Observe service information | |
| Vehicle Identification Number (VIN) to | *********00160000 |
| Fitting Position | Front |
| Block Separation | |
| Vehicle Identification Number (VIN) from | *********00160001 |
| More information » | |
$41,20
$48,40
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Engine Code | J18A |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
| Vehicle Identification Number (VIN) from | *00140001 |
| Vehicle Identification Number (VIN) to | *00200000 |
| More information » | |
$42,00
$49,50
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
$42,40
$49,90
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Oxygen Sensor | Planar Sensor, Heated, Thread pre-greased |
| Supplementary Article/Info 2 | without plug |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Construction Year to | 06.1999 |
| Fitting Position | before catalytic converter |
| More information » | |
$47,00
$55,30
-16%
ADD TO BASKET
| Cable Length | 324mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor |
| Fitting Position | before catalytic converter |
| Vehicle Identification Number (VIN) to | 200000 |
| Vehicle Identification Number (VIN) from | 200001 |
$49,90
$58,60
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 325mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 1821377E00 |
| Quality | OE |
| Weight | 89g |
| Gross Weight | 119g |
| Vehicle Identification Number (VIN) to | S00200000 |
| Transmission Type | Manual Transmission |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$53,10
$62,50
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Length | 364mm |
| Number of circuits | 4 |
| Connector Shape | angular |
| Socket colour | white |
| for OE No. | 18213 67D00 |
| Thread Size | M18 x 1, 5 |
| Cable Length | 325mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Regulating Sensor, Thread pre-greased |
| Fitting Position | before catalytic converter |
| Vehicle Identification Number (VIN) to | W00200000 |
| More information » | |
$58,70
$69,10
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Engine Code | J18A |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
| Vehicle Identification Number (VIN) from | *00200001 |
| More information » | |
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Engine Code | J18A |
| Oxygen Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
| Vehicle Identification Number (VIN) from | 00200001 |
| More information » | |
$60,90
$65,30
-7%
ADD TO BASKET
| Number of circuits | 3 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Engine Code | J18A |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
$65,90
$70,60
-7%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 340mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 1821365G00 |
| Quality | OE |
| Weight | 82g |
| Gross Weight | 112g |
| Vehicle Identification Number (VIN) from | S00200001 |
| Transmission Type | Manual Transmission |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$82,00
$96,40
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Connector Shape | D Shape |
| Conductor Number | 4conductor |
| Fitting Position | after catalytic converter, Exhaust Manifold |
| Cable Length | 450mm |
| Oxygen Sensor | Thread pre-greased, Regulating Sensor |
| Vehicle Identification Number (VIN) from | S00200001 |
| More information » | |
$103,70
$122,00
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
