Sensor / Probe TOYOTA YARIS (_P1_) 1.3 (NCP10, SCP12_) (63kW / 86hp) 1999 - 2005
Previous 1 2 Next
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-SK-000 |
$18,80
$22,10
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Number of circuits | 4 |
$20,50
$24,10
-15%
ADD TO BASKET
| Length | 275mm |
| Fitting Position | Front, Left Front, before catalytic converter, after catalytic converter |
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-TY-008 |
$22,00
$25,90
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Length | 330mm |
| Engine Code | 2NZ-FE |
| Construction Year to | 12.2002 |
| Fitting Position | before catalytic converter |
$23,70
$27,90
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Resistor | 13Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$27,80
$32,80
-16%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Regulating Sensor, Diagnostic Probe, Regulating Sensor |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Transmission Type | Manual Transmission |
| Construction Year to | 12.2002, 12.2002, 01.2005 |
| Fitting Position | before catalytic converter, before catalytic converter, after catalytic converter |
| Block Separation | |
| Block Separation | |
| Vehicle type | |
| Construction Year from | 09.1999 |
| More information » | |
$30,10
$35,40
-15%
ADD TO BASKET
| Thread Size | M18x1.5 |
| Cable Length | 490mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Thread pre-greased |
| Fabrication Number | ESL-TY-040 |
$30,90
$36,40
-16%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe |
| Cable Length | 900mm |
$30,90
$36,40
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| Quality | OE |
| Weight | 103g |
| Gross Weight | 147g |
| Construction Year to | 12.2002 |
| Vehicle Production Country | Japan |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$32,10
$37,70
-15%
ADD TO BASKET
| Oxygen Sensor | Planar Sensor |
| Cable Length | 400mm |
| Number of circuits | 4 |
| Construction Year to | 12.2002 |
| for OE No. | 89465-52050 |
| Vehicle Production Country | Japan |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$32,50
$38,30
-16%
ADD TO BASKET
| Length | 450mm |
| Thread Size | M18x1.5-6e |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Heated |
| Fitting Position | Front, after catalytic converter |
$32,90
$38,70
-15%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Number of pins | 4-pin connector |
| Cable Length | 500mm |
| Fitting Position | Exhaust Manifold |
| for OE No. | 8946512540 |
$33,60
$39,50
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| External Thread Size | M18 x 1, 5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 410mm |
| Weight | 0.092kg |
| Construction Year to | 12.2002 |
| More information » | |
$33,70
$39,60
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor, Regulating Sensor |
| Voltage | 12V |
| Length | 392mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.13kg |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| Engine Code | 2NZ-FE |
| Construction Year to | 12.2002 |
| More information » | |
$33,70
$39,60
-15%
ADD TO BASKET
| Cable Length | 369mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor |
| Exhaust System | for pre-catalytic converter |
| Block Separation | |
| Fitting Position | before catalytic converter |
$34,90
$41,00
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Cable Length | 360mm |
| Number of pins | 4-pin connector |
$37,80
$44,40
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe |
| Voltage | 12V |
| Length | 410mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.13kg |
| Resistor | 13Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| Construction Year to | 12.2002 |
| More information » | |
$37,90
$44,60
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | 2NZ-FE |
| Oxygen Sensor | Regulating Sensor |
| Oxygen Sensor | Heated, Regulating Sensor |
| External Thread Size | M18 x 1, 5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 410mm |
| Weight | 0.092kg |
| Construction Year to | 12.2002 |
| More information » | |
$42,40
$49,80
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
$42,40
$49,90
-16%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Heated, Thread pre-greased, Regulating Sensor |
| Line insulation design | with silicone-coated woven-fibre insulation |
| Supplementary Article/Info 2 | without plug |
| Number of pins | 4-pin connector |
| for OE No. | V99760001 |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Length | 350mm |
| Fitting Position | after catalytic converter |
| Engine Code | 2NZ-FE |
| More information » | |
$45,00
$52,90
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Length | 350mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Finger-type Sensor, Thread pre-greased, Regulating Sensor |
| Construction Year to | 11.2002 |
| Fitting Position | Exhaust Manifold |
$46,20
$54,30
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Length | 775mm |
| Engine Code | 2NZ-FE |
$46,90
$55,20
-16%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Number of pins | 4-pin connector |
| Cable Length | 500mm |
| Fitting Position | Exhaust Manifold |
| for OE No. | 8946512540 |
$47,00
$55,30
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Oxygen Sensor | Planar Sensor, Heated, Thread pre-greased |
| Supplementary Article/Info 2 | without plug |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Construction Year from | 01.2000 |
| Construction Year to | 01.2003 |
| Fitting Position | before catalytic converter |
| More information » | |
$47,00
$55,30
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Guarantee | 3 years guarantee |
| Weight | 0.12kg |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
$48,40
$56,90
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Guarantee | 3 years guarantee |
| Weight | 0.1kg |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
$48,40
$56,90
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 360mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 8946505100, 89465-52050 |
| Quality | OE |
| Weight | 94g |
| Gross Weight | 127g |
| Construction Year to | 12.2002 |
| Vehicle Production Country | Japan |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$49,00
$57,70
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Overall Length | 565mm |
| Available as universal article as well, see article no. | 0258986602 |
| Recommended change interval | 250, 000km |
| Construction Year to | 12.2002 |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
| More information » | |
$49,30
$58,00
-16%
ADD TO BASKET
| Length | 350mm |
| Number of circuits | 4 |
| Construction Year to | 12.2002 |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
$53,20
$62,50
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
