Exhaust Emission Control TOYOTA AVENSIS (_T25_) 2.4 VVT-i (AZT251_, AZT251R) (120kW / 163hp) 2003 - 2008
Previous 1 2 Next
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-SK-000 |
$18,80
$22,10
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Number of circuits | 4 |
$20,50
$24,10
-15%
ADD TO BASKET
| Length | 275mm |
| Fitting Position | Front, Left Front, before catalytic converter, after catalytic converter |
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-TY-008 |
$22,00
$25,90
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Length | 330mm |
| Engine Code | 2AZ-FSE |
| Fitting Position | Right |
$23,70
$27,90
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Resistor | 13Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$27,80
$32,80
-16%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe |
| Number of pins | 4-pin connector |
| Cable Length | 720mm |
| for OE No. | 8946533340 |
$28,00
$33,00
-16%
ADD TO BASKET
| Fitting Position | Left Front, Right Front, before catalytic converter |
| Oxygen Sensor | Regulating Sensor, Thread pre-greased |
| Fabrication Number | ESL-TY-017 |
$28,10
$33,00
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Thread Size | M18x1.5 |
| Cable Length | 655mm |
| Number of pins | 4-pin connector |
| Fitting Position | Left, after catalytic converter |
| Fabrication Number | ESL-TY-023 |
$28,20
$33,10
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Thread Size | M18x1.5 |
| Cable Length | 630mm |
| Number of pins | 4-pin connector |
| Fitting Position | Right, after catalytic converter |
| Fabrication Number | ESL-TY-024 |
$29,20
$34,40
-16%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Regulating Sensor, Regulating Sensor |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Transmission Type | Manual Transmission |
| Fitting Position | Rear, Front, before catalytic converter |
| Block Separation | |
$30,10
$35,40
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe |
| Cable Length | 900mm |
$30,90
$36,40
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Socket colour | grey |
| for OE No. | 89465 30430 |
| Length | 800mm |
| Thread Size | M18 x 1, 5 |
| Supplementary Article/Info 2 | with fastening material |
| Connector Shape | angular |
| Number of circuits | 4 |
| Cable Length | 800mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Fitting Position | after catalytic converter |
| More information » | |
$31,90
$37,50
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| Quality | OE |
| Weight | 103g |
| Gross Weight | 147g |
| Fitting Position | Left, Right |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$32,10
$37,70
-15%
ADD TO BASKET
| Oxygen Sensor | Planar Sensor |
| Cable Length | 400mm |
| Number of circuits | 4 |
| Fitting Position | Left |
| for OE No. | 89465-05100 |
| Exhaust System | for pre-catalytic converter |
$32,50
$38,30
-16%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Number of pins | 4-pin connector |
| Cable Length | 500mm |
| Fitting Position | Exhaust Manifold |
| for OE No. | 8946512540 |
$33,60
$39,50
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor, Regulating Sensor |
| Voltage | 12V |
| Length | 392mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.13kg |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| Engine Code | 2AZ-FSE |
| More information » | |
$33,70
$39,60
-15%
ADD TO BASKET
| Resistor | 13Ohm |
| Conductor Number | 4conductor |
| Number of circuits | 4 |
| Length | 800mm |
| Cable Length | 800mm |
| Oxygen Sensor | Heated |
$34,40
$40,50
-16%
ADD TO BASKET
| Cable Length | 369mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor |
| Fitting Position | Left, Right, Front, before catalytic converter |
$34,90
$41,00
-15%
ADD TO BASKET
| Cable Length | 492mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor |
| Fitting Position | Left, Right, Front, before catalytic converter |
$35,20
$41,40
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Cable Length | 360mm |
| Number of pins | 4-pin connector |
$37,80
$44,40
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe |
| Voltage | 12V |
| Length | 410mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.13kg |
| Resistor | 13Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$37,90
$44,60
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | 2AZ-FSE |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | Left |
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Cable Length | 675mm |
| SVHC | No SVHC present! |
| Observe technical data | |
$39,20
$46,10
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
$42,40
$49,90
-16%
ADD TO BASKET
| Cable Length | 350mm |
| Conductor Number | 4conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Regulating Sensor |
| Available as universal article as well, see article no. | 10.8235 |
| Number of circuits | 4 |
| Engine Code | 2AZ-FSE |
| Construction Year from | 04.2006 |
| Fitting Position | Left, Right, Front, before catalytic converter |
| Quantity required | 2 |
| More information » | |
$43,00
$50,50
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of pins | 4-pin connector |
| Cable Length | 510mm |
| for OE No. | 8946520670 |
| Fitting Position | Right, Exhaust Manifold |
$43,00
$50,60
-16%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Heated, Thread pre-greased, Regulating Sensor |
| Line insulation design | with silicone-coated woven-fibre insulation |
| Supplementary Article/Info 2 | without plug |
| Number of pins | 4-pin connector |
| for OE No. | V99760001 |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Length | 350mm |
| Fitting Position | after catalytic converter, Left |
| Engine Code | 2AZ-FSE |
| More information » | |
$45,00
$52,90
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Length | 350mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Finger-type Sensor, Thread pre-greased, Regulating Sensor |
| Fitting Position | Left, Exhaust Manifold |
$46,20
$54,30
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Length | 775mm |
| Engine Code | 2AZ-FSE |
| Fitting Position | Left |
$46,90
$55,20
-16%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Number of pins | 4-pin connector |
| Cable Length | 500mm |
| Fitting Position | Exhaust Manifold |
| for OE No. | 8946512540 |
$47,00
$55,30
-16%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
