Sensor / Probe VOLVO S60 I (384) 2.4 T (147kW / 200hp) 2000 - 2010
Previous 1 2 Next
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-SK-000 |
$18,80
$22,10
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Number of circuits | 4 |
$20,50
$24,10
-15%
ADD TO BASKET
| Length | 500mm |
| Number of connectors | 4 |
| Oxygen Sensor | Heated |
$20,60
$24,20
-15%
ADD TO BASKET
| Weight | 0.18kg |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Diagnostic Probe |
| Rated Resistance | 9Ohm |
| Overall Length | 540mm |
| Thread Size | M18X1, 5 |
$21,60
$25,30
-15%
ADD TO BASKET
| Oxygen Sensor | Planar Sensor, Heated |
| Cable Length | 210mm |
| Number of pins | 4-pin connector |
$23,50
$27,70
-16%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Diagnostic Probe |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Transmission Type | Manual Transmission |
| Construction Year from | 08.2001 |
| Construction Year to | 07.2003 |
| Fitting Position | after catalytic converter |
| More information » | |
$30,10
$35,40
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 800mm |
| Length | 31.5Inch |
| Number of pins | 4-pin connector |
| Available as universal article as well, see article no. | OS-15P |
| Specification | Isolated Ground, Planar Type, Zirconia Type |
| Fitting Position | after catalytic converter |
| Construction Year to | 08.2003 |
| Engine Code | B 5244 T3 |
| More information » | |
$30,90
$36,30
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Diagnostic Probe |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Construction Year to | 07.2001 |
| Fitting Position | after catalytic converter |
| for OE No. | 9186934 |
$31,30
$36,80
-15%
ADD TO BASKET
| Cable Length | 1, 040mm |
| Oxygen Sensor | Planar Sensor, Heated, Diagnostic Probe |
| Fitting Position | after catalytic converter |
| Model Year from | 2002 |
$33,30
$39,20
-16%
ADD TO BASKET
| Length | 770mm |
| Number of connectors | 4 |
| Construction Year from | 08.2000 |
| Construction Year to | 01.2003 |
| Oxygen Sensor | Diagnostic Probe |
$34,80
$40,90
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe |
| Voltage | 12V |
| Length | 765mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.15kg |
| Resistor | 9Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$38,30
$45,00
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | B 5244 T3 |
| Vehicle Identification Number (VIN) to | 425139 |
| Oxygen Sensor | Diagnostic Probe |
| Oxygen Sensor | Heated, Diagnostic Probe |
| External Thread Size | M18 x 1, 5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 850mm |
| Weight | 0.107kg |
| Vehicle Identification Number (VIN) to | ***********425139 |
| More information » | |
$41,60
$48,90
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
$42,40
$49,90
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Diagnostic Probe |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 93g |
| Gross Weight | 140g |
| Construction Year to | 01.2003 |
| More information » | |
$42,60
$50,10
-15%
ADD TO BASKET
| Cable Length | 250mm |
| Conductor Number | 4conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Diagnostic Probe |
| Number of circuits | 4 |
| Engine Code | B 5244 T3 |
| Model Year from | 2002 |
| Fitting Position | after catalytic converter |
| More information » | |
$42,60
$50,10
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Diagnostic Probe |
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | B 5244 T3 |
| Construction Year from | 01.2005 |
$42,80
$50,30
-15%
ADD TO BASKET
| Cable Length | 250mm |
| Conductor Number | 4conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Diagnostic Probe |
| Number of circuits | 4 |
| Engine Code | B 5244 T3 |
| Model Year from | 2002 |
| Fitting Position | after catalytic converter |
| More information » | |
$43,40
$51,10
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Guarantee | 3 years guarantee |
| Weight | 0.23kg |
| Always compare old and new part (in particular OE No.) | |
$44,60
$52,40
-15%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Heated, Thread pre-greased, Diagnostic Probe |
| Line insulation design | with silicone-coated woven-fibre insulation |
| Supplementary Article/Info 2 | without plug |
| Number of pins | 4-pin connector |
| for OE No. | V99760001 |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Length | 350mm |
| Fitting Position | after catalytic converter |
| Engine Code | B 5244 T3 |
| Vehicle Identification Number (VIN) to | 425139 |
| More information » | |
$45,00
$52,90
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Length | 1, 700mm |
| Thread Size | M18x1, 5 |
| Cable Length | 1, 530mm |
| Conductor Number | 3conductor |
| Oxygen Sensor | Thread pre-greased, Regulating Sensor |
| Construction Year from | 10.2000 |
| Fitting Position | Front, before catalytic converter |
| More information » | |
$45,20
$53,10
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Overall Length | 790mm |
| Available as universal article as well, see article no. | 0258986615 |
| Recommended change interval | 160, 000km |
| Construction Year to | 07.2001 |
| Oxygen Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
| for OE No. | 9186934 |
| More information » | |
$46,30
$54,50
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Diagnostic Probe |
| Thread Size | M18x1.5 |
| Cable Length | 770mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 1367825, 8642230 |
| Quality | OE |
| Weight | 131g |
| Gross Weight | 164g |
| Construction Year to | 01.2003 |
| More information » | |
$46,60
$54,80
-15%
ADD TO BASKET
| Cable Length | 1, 670mm |
| Oxygen Sensor | Finger-type Sensor, Heated, Regulating Sensor |
| Fitting Position | before catalytic converter |
| Model Year from | 2002 |
| Model Year to | 2001 |
$46,90
$55,10
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Oxygen Sensor | Planar Sensor, Heated, Thread pre-greased |
| Supplementary Article/Info 2 | without plug |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Construction Year to | 12.2004 |
| Fitting Position | after catalytic converter |
| More information » | |
$47,00
$55,30
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Diagnostic Probe |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| Assy./disassy. by qualified personnel required! | |
| Fitting Position | after catalytic converter |
| Model Year from | 2002 |
$47,30
$55,60
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Diagnostic Probe |
| External Thread Size | M18 x 1, 5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 850mm |
| Weight | 0.107kg |
| Vehicle Identification Number (VIN) to | ***********425139 |
| More information » | |
$51,80
$60,90
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Overall Length | 790mm |
| Available as universal article as well, see article no. | 0258986602 |
| Recommended change interval | 250, 000km |
| Construction Year from | 08.2001 |
| Construction Year to | 07.2003 |
| Oxygen Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
| More information » | |
$54,80
$64,50
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Construction Year to | 07.2001 |
| Oxygen Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
| for OE No. | 9186934 |
| More information » | |
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Construction Year from | 08.2001 |
| Construction Year to | 07.2003 |
| Oxygen Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
| More information » | |
$60,90
$65,30
-7%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
