Timing belt and water pump kit VW BORA I (1J2) 1.9 TDI (66kW / 90hp) 1998 - 2013
Previous 1 2 3 4 5 Next
| Weight | 0.8kg |
| Vehicle configuration line / variant | TB |
| for OE No. | 038121011AX |
$21,00
$24,70
-15%
ADD TO BASKET
| Outer Diameter | 68mm |
| Width | 25mm |
$21,30
$25,00
-15%
ADD TO BASKET
| Surface | Smooth |
| Material | Metal |
| Outer Diameter | 80mm |
| Inner Diameter | 10mm |
| Width | 29.5mm |
| Construction Year to | 05.2005 |
| Driven units | Camshaft |
| More information » | |
$21,40
$25,20
-16%
ADD TO BASKET
| Width | 29mm |
| Inner Diameter | 10mm |
| Outer Diameter | 80mm |
| Material | Metal |
| Weight | 0.612kg |
$21,50
$25,30
-16%
ADD TO BASKET
| Pulleys | with belt pulley |
| Number of Teeth | 19 |
| Exchange Part | |
| Vehicle type | Bora |
| Number of Teeth | 19 |
| Weight | 0.74kg |
$21,90
$25,70
-15%
ADD TO BASKET
| Ø | 80mm |
| Width | 29mm |
| Fitting Position | Lower Right |
$22,00
$25,90
-16%
ADD TO BASKET
$22,90
$26,90
-15%
ADD TO BASKET
| Number of Teeth | 141 |
| Length | 1, 343mm |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
$23,00
$27,00
-15%
ADD TO BASKET
| Number of Teeth | 19 |
| Operating Mode | Mechanical |
| Supplementary Article/Supplementary Info | do not use sealant |
| Supplementary Article/Info 2 | with seal ring |
| Number of blades/vanes | 7 |
| Water Pump Pulley Ø | 56.03mm |
| Impeller Ø | 64mm |
| Water Pump Type | for timing belt drive |
| Water pump impeller material | Metal |
| Construction Year to | 12.2001 |
| More information » | |
$23,00
$27,10
-16%
ADD TO BASKET
| Number of Teeth | 141 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.195kg |
| Width | 25.4mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft, Camshaft |
| Engine Code | AGR, ALH |
| Engine no. up to | 565 000, 500 000 |
| Block Separation | |
| More information » | |
$24,00
$28,30
-16%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Colour | black |
| Number of Teeth | 141 |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Length | 1, 343mm |
| Observe technical data | |
| Construction Year to | 05.2005 |
| Driven units | Camshaft |
| Engine Code | AGR, ALH |
| Article number of the recommended special tool | GAT4740 |
| More information » | |
$24,30
$28,60
-16%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with gasket/seal |
| Water Pump Type | for timing belt drive |
| Number of Teeth | 19 |
| Quality | Sealed with SiC/SiC |
| New part without deposit | |
| Article number of the recommended special tool | 999 990 0002 |
$24,50
$28,80
-15%
ADD TO BASKET
| Width | 25mm |
| Number of Teeth | 141 |
| Belts | with rounded tooth profile |
| Weight | 0.15kg |
| Observe service information | |
$24,90
$29,30
-16%
ADD TO BASKET
| Weight | 0.473kg |
| Width | 30mm |
| Inner Diameter | 8mm |
| Outer Diameter | 67.5mm |
| Quantity required | 1 |
$25,50
$30,00
-15%
ADD TO BASKET
| Water Pump Type | for timing belt drive |
| Water pump impeller material | Plastic |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Number of Teeth | 19 |
$25,50
$30,00
-15%
ADD TO BASKET
| Operating Mode | Mechanical |
| Water pump impeller material | Metal |
| Supplementary Article/Supplementary Info | with gasket/seal |
| Engine Code | AGR, ALH |
| Block Separation | |
$25,70
$30,20
-15%
ADD TO BASKET
$25,90
$30,50
-16%
ADD TO BASKET
| Water Pump Type | for timing belt drive |
| Number of Teeth | 19 |
| SVHC | No SVHC present! |
$26,30
$30,90
-15%
ADD TO BASKET
| Number of Teeth | 19 |
$26,30
$30,90
-15%
ADD TO BASKET
| Number of Teeth | 141 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.2kg |
| Width | 25.4mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft, Camshaft |
| Engine Code | AGR, ALH |
| Engine no. from | 565 001, 500 001 |
| Block Separation | |
| More information » | |
$26,40
$31,10
-16%
ADD TO BASKET
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of blades/vanes | 7 |
| Weight | 0.741kg |
| Supplementary Article/Info 2 | with seal ring |
| Observe service information | |
| More information » | |
$29,00
$34,10
-15%
ADD TO BASKET
| Pulleys | with belt pulley |
| Supplementary Article/Info 2 | without lid |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Weight | 0.768kg |
| Engine Code | AGR, ALH |
$29,20
$34,30
-15%
ADD TO BASKET
| Ø | 80mm |
| Width | 29mm |
| Height | 48mm |
$29,20
$34,30
-15%
ADD TO BASKET
| Ø | 68mm |
| Width | 25.4mm |
| Outer Diameter | 78mm |
| Height | 42.6mm |
| Engine Code | AGR, ALH |
$30,50
$35,90
-16%
ADD TO BASKET
| Operating Mode | Mechanical |
| Supplementary Article/Supplementary Info | with gasket/seal |
| Number of Teeth | 19 |
| Impeller Ø | 64mm |
| Water pump impeller material | Metal |
| Number of blades/vanes | 7 |
| Voltage | 12V |
| Pressure [bar] | 0.1bar |
| Flow rate | 500l/h |
| Operating Mode | Electric |
$32,40
$38,10
-15%
ADD TO BASKET
| Belt Pulley Ø | 67.5mm |
| Height 1 | 30mm |
| Height 2 | 42.8mm |
| Weight | 0.5kg |
| Driven units | Camshaft |
| Vehicle configuration line / variant | TENS |
| for OE No. | 038109243N |
| More information » | |
$36,20
$42,60
-16%
ADD TO BASKET
| Voltage | 12V |
| for OE No. | 034965561A |
| Operating Mode | Electric |
| Assy./disassy. by qualified personnel required! | |
$36,80
$43,20
-15%
ADD TO BASKET
| Ø | 68mm |
| Width | 26mm |
| Tensioner Pulley Actuation | Automatic |
| Flange Ø | 77.6mm |
| Fitting Position | Upper Left |
$37,30
$43,80
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
