Timing Belt / Tensioner / Guide VW PASSAT B8 (3G2, CB2) 2.0 TDI (110kW / 150hp) 2014 - ...
Previous 1 2 3 4 Next
| Width of castor bearing surface | 26mm |
| Outer Diameter | 67mm |
| Weight | 0.589kg |
| Engine Code | DSRB, DSRA |
26,20€
30,80€
-15%
ADD TO BASKET
| Belt Pulley Ø | 40mm |
| Height 1 | 29mm |
| Height 2 | 46.6mm |
| Weight | 0.3kg |
| Driven units | Camshaft |
| Trim Level | CRLBDBGADFGA |
| for OE No. | 03L109244G |
| More information » | |
27,10€
31,90€
-16%
ADD TO BASKET
| Width | 25mm |
| Number of Teeth | 145 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
| Weight | 0.17kg |
| Engine Code | CRLB, DBGA, DFGA |
27,70€
32,60€
-16%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Colour | black |
| Number of Teeth | 145 |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Length | 1,381mm |
| Driven units | Camshaft |
| Engine Code | CRLB, DBGA, DFGA |
| Article number of the recommended special tool | GAT5170, GAT4844, GAT4741 |
| More information » | |
27,90€
32,80€
-15%
ADD TO BASKET
| Number of Teeth | 145 |
| Width | 25mm |
| Driven units | Camshaft |
| Trim Level | HT -CRLBDBGADFGA |
| for OE No. | 04L109119D |
27,90€
32,90€
-16%
ADD TO BASKET
| Surface | Smooth |
| Outer Diameter | 68mm |
| Inner Diameter | 8mm |
| Width | 30mm |
| Driven units | Camshaft, Camshaft |
| Engine Code | CRLB, DFGA, DBGA |
| Block Separation | |
| Construction Year to | 03.2017 |
| More information » | |
28,00€
33,00€
-16%
ADD TO BASKET
| Number of Teeth | 145 |
| Length | 1,381mm |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Supplementary Article/Info 2 | not for dusty operating conditions |
| Engine Code | CRLB, DFGA, DBGA |
| Construction Year to | 07.2019 |
| More information » | |
28,20€
33,20€
-16%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Colour | black/white |
| Number of Teeth | 149 |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Length | 1,419mm |
| Driven units | Camshaft |
| Engine Code | DSRA, DSRB, DTSA, DTSB |
| More information » | |
28,50€
33,60€
-16%
ADD TO BASKET
| Number of Teeth | 145 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.21kg |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft |
| Engine Code | CRLB, DFGA, DBGA |
| More information » | |
29,30€
34,50€
-16%
ADD TO BASKET
| Width | 27mm |
| Outer Diameter | 68mm |
32,40€
38,10€
-15%
ADD TO BASKET
| Outer Diameter 1 | 78mm |
| Width 1 | 46mm |
32,70€
38,40€
-15%
ADD TO BASKET
| Length | 1,026mm |
| Number of belts | 1 |
| Number of ribs | 6 |
33,10€
38,90€
-15%
ADD TO BASKET
| Outer Diameter | 67.8mm |
| Width | 30.2mm |
| SVHC | No SVHC present! |
| Engine Code | CRLB, DBGA, DFGA |
33,40€
39,30€
-16%
ADD TO BASKET
| Number of Teeth | 149 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.22kg |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Driven units | Camshaft |
| Engine Code | DSRA, DSRB, DTSA, DTSB |
| More information » | |
35,40€
41,70€
-16%
ADD TO BASKET
| Outer Diameter | 67.8mm |
| Width | 30.2mm |
| SVHC | No SVHC present! |
| Engine Code | DSRA, DSRB, DTSA, DTSB |
37,30€
43,90€
-16%
ADD TO BASKET
| Ø | 68mm |
| Width | 26.3mm |
| Tensioner Pulley Actuation | Automatic |
| Construction Year to | 03.2017 |
| Engine Code | DBGA |
41,50€
48,80€
-15%
ADD TO BASKET
| Width of castor bearing surface | 26mm |
| Width | 26mm |
| Outer Diameter | 67.8mm |
| Material | Metal |
| Weight | 0.594kg |
| Engine Code | DFGA, CRLB, DBGA |
| Block Separation | |
| Construction Year to | 03.2017 |
| More information » | |
43,60€
51,20€
-15%
ADD TO BASKET
| Number of Teeth | 145 |
| Width | 25mm |
| Number of belts | 1 |
| for Art.No. | KD153/KD153V |
64,60€
75,90€
-15%
ADD TO BASKET
| Belt Width | 25mm |
| Belt Material | PTFE (polytetrafluoroethylene) |
| Colour | black |
| Number of Teeth | 145 |
| Belts | with rounded tooth profile |
| Engine Code | CRLB, DFGA |
64,60€
76,00€
-15%
ADD TO BASKET
| Number of Teeth 1 | 145 |
| Width 1 | 25mm |
| Observe service information | |
| Follow installation instructions | |
| SVHC | No SVHC present! |
| Engine Code | DBGA, DFGA, CRLB |
72,40€
85,20€
-16%
ADD TO BASKET
| Packaging length | 26.5cm |
| Packaging width | 16.5cm |
| Packaging height | 9.5cm |
| Weight | 1.32kg |
| Number of Teeth | 145 |
| Width | 25mm |
| Driven units | Camshaft, Camshaft |
| Engine Code | DFGA, CRLB, DBGA |
| Block Separation | |
| Construction Year to | 03.2017 |
| More information » | |
72,90€
85,70€
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | without water pump |
| Driven units | Camshaft, Camshaft |
| Engine Code | CRLB, DFGA, DBGA |
| Article number of the recommended special tool | GAT5170, GAT5247, GAT4844, GAT5170, GAT5247, GAT4844 |
| Block Separation | |
| Construction Year to | 03.2017 |
75,40€
88,70€
-15%
ADD TO BASKET
| Weight | 1.4kg |
| Driven units | Camshaft |
| Trim Level | HT -03/17> |
| Number of Teeth | 145 |
| Width | 25mm |
| Length | 1,381mm |
| Number of belts | 1 |
| Rollers contained | 3 |
| More information » | |
76,00€
89,40€
-15%
ADD TO BASKET
| Weight | 1.3kg |
| Driven units | Camshaft |
| Trim Level | HT -CRLBDBGADFGA |
| for OE No. | 04L198119K |
| Number of Teeth | 145 |
| Width | 25mm |
| Length | 1,381mm |
| Number of belts | 1 |
| Rollers contained | 3 |
| More information » | |
77,20€
90,90€
-16%
ADD TO BASKET
| Number of Teeth | 145 |
| Length | 1,381mm |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Number of track rollers | 3 |
| Supplementary Article/Info 2 | not for dusty operating conditions |
| Engine Code | CRLB, DFGA, DBGA |
| Construction Year to | 07.2019, 02.2017 |
| Block Separation | |
| Construction Year from | 05.2015 |
| More information » | |
77,70€
91,50€
-16%
ADD TO BASKET
| Number of Teeth 1 | 149 |
| Width 1 | 25mm |
| Observe service information | |
| SVHC | No SVHC present! |
| Engine Code | DSRA, DSRB, DTSA, DTSB |
78,40€
92,20€
-15%
ADD TO BASKET
| Number of Teeth | 145 |
| Supplementary Article/Supplementary Info | with attachment material |
| Belts | with rounded tooth profile |
| Weight | 1.049kg |
| Engine Code | DFGA, CRLB, DBGA |
| Block Separation | |
| Construction Year to | 03.2017 |
| More information » | |
79,20€
93,10€
-15%
ADD TO BASKET
| Number of belts | 1 |
| Rollers contained | 3 |
| Number of Teeth | 145 |
| Width | 25mm |
| for components see parts list | |
| for OE No. | 04L 198 119A |
| Production date to | 05.03.2017 |
| More information » | |
79,50€
93,60€
-16%
ADD TO BASKET
| Number of belts | 1 |
| Width 1 | 25mm |
| Number of track rollers | 3 |
| Number of Teeth 1 | 145 |
82,80€
97,40€
-15%
ADD TO BASKET
| Number of Teeth | 145 |
| Width | 25mm |
| Weight | 2.05kg |
| for Art.No. | A255 |
83,40€
98,10€
-15%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
