Timing belt and water pump kit VW BORA Variant (1J6) 1.6 16V (77kW / 105hp) 1999 - 2005
Previous 1 2 3 4 5 Next
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Number of Teeth | 27 |
| Number of blades/vanes | 8 |
| Weight | 0.823kg |
| Supplementary Article/Info 2 | with seal ring |
| Observe service information | |
| More information » | |
$28,20
$33,20
-16%
ADD TO BASKET
| Water Pump Type | for timing belt drive |
| Water pump impeller material | Plastic |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Number of Teeth | 27 |
$28,60
$33,60
-15%
ADD TO BASKET
| Water Pump Type | for timing belt drive |
| Supplementary Article/Supplementary Info | with gasket/seal |
| SVHC | No SVHC present! |
$28,60
$33,60
-15%
ADD TO BASKET
| Width | 17mm |
| Number of Teeth | 58 |
| Belts | with rounded tooth profile |
| Weight | 0.47kg |
| Observe service information | |
$30,40
$35,70
-15%
ADD TO BASKET
| Operating Mode | Mechanical |
| Supplementary Article/Supplementary Info | with gasket/seal |
| Number of Teeth | 27 |
| Water pump impeller material | Metal |
| Number of Teeth | 130 |
| Width | 20mm |
| Engine Code | ATN |
| Driven units | Camshaft |
$31,50
$37,00
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with gasket/seal |
| Water Pump Type | for timing belt drive |
| Number of Teeth | 27 |
| New part without deposit | |
| Article number of the recommended special tool | 999 990 0002 |
$31,90
$37,50
-15%
ADD TO BASKET
| Voltage | 12V |
| Pressure [bar] | 0.1bar |
| Flow rate | 500l/h |
| Operating Mode | Electric |
$32,40
$38,10
-15%
ADD TO BASKET
| Number of Teeth | 27 |
| Weight | 0.92kg |
$32,90
$38,70
-15%
ADD TO BASKET
| Voltage | 12V |
| for OE No. | 034965561A |
| Operating Mode | Electric |
| Assy./disassy. by qualified personnel required! | |
$36,80
$43,20
-15%
ADD TO BASKET
$44,70
$52,60
-16%
ADD TO BASKET
| Operating Mode | Electric |
| Voltage | 12V |
| for OE No. | 078 965 561 |
$46,50
$54,80
-16%
ADD TO BASKET
| Weight | 0.4kg |
| Driven units | Camshaft |
| Vehicle configuration line / variant | HT -KTB |
| Number of Teeth | 58 |
| Width | 17mm |
| Length | 464mm |
| Number of belts | 1 |
| Rollers contained | 1 |
| More information » | |
$52,10
$61,30
-16%
ADD TO BASKET
| Voltage | 12V |
| Length | 115mm |
| Width | 70mm |
| Height | 80mm |
| Weight | 0.21kg |
| Material | Plastic |
| Supplementary Article/Supplementary Info | without holder |
| Operating Mode | Electric |
| More information » | |
$52,70
$62,00
-15%
ADD TO BASKET
| Voltage | 12V |
| Pressure [bar] | 0.1bar |
| Flow rate | 500l/h |
| Operating Mode | Electric |
$60,20
$70,80
-15%
ADD TO BASKET
| Number of Teeth | 58 |
| Number of Teeth 2 | 130 |
| Length | 464mm |
| Length 2 | 1, 040mm |
| Width | 17mm |
| Width 2 | 20mm |
| Tooth Pitch | 8mm |
| Number of track rollers | 4 |
| More information » | |
$64,50
$75,90
-16%
ADD TO BASKET
| Number of track rollers | 4 |
| Number of belts | 2 |
| Width 2 | 17mm |
| Width 1 | 20mm |
| Number of Teeth | 130 |
| Number of Teeth 2 | 58 |
| Vehicle Identification Number (VIN) | [;1J-6-050000], [;1K-6-250000], [;2K-6-150 000], [9C-7-550 001;], [;9N-7-000 000] |
| More information » | |
$65,40
$76,90
-15%
ADD TO BASKET
| Number of belts | 2 |
| Number of Teeth 1 | 130 |
| Width 1 | 20mm |
| Number of Teeth 2 | 58 |
| Width 2 | 17mm |
| Observe service information | |
| Follow installation instructions | |
| SVHC | No SVHC present! |
| More information » | |
$67,60
$79,50
-15%
ADD TO BASKET
| Weight | 1.4kg |
| Driven units | Camshaft |
| Vehicle configuration line / variant | HT -KTB |
| for OE No. | 036198119E |
| Number of Teeth | 130 |
| Width | 20mm |
| Length | 1, 040mm |
| Number of Teeth 1 | 58 |
| Width 1 | 17mm |
| Length 1 | 464mm |
| Number of belts | 2 |
| 2 Belts | |
| Rollers contained | 4 |
| More information » | |
$68,90
$81,10
-16%
ADD TO BASKET
| Width | 17mm, 20mm |
| Number of Teeth | 130, 58 |
| Belts | with rounded tooth profile |
| Weight | 1.5kg |
| Observe service information | |
$69,10
$81,30
-16%
ADD TO BASKET
| Observe technical data | |
| Driven units | 2.Camshaft |
| Article number of the recommended special tool | GAT4635, GAT4632 |
$70,20
$82,60
-16%
ADD TO BASKET
| Packaging length | 26.5cm |
| Packaging width | 16.5cm |
| Packaging height | 9.5cm |
| Weight | 1.4kg |
| Number of Teeth | 130 |
| Width | 20mm |
| 2 Belts | |
| Width 2 | 17mm |
| Number of Teeth 2 | 58 |
| Rollers contained | 4 |
| Driven units | Camshaft |
| More information » | |
$74,50
$87,60
-15%
ADD TO BASKET
| Width | 17mm, 20mm |
| Number of Teeth | 130, 58 |
| Belts | with rounded tooth profile |
| Weight | 1.5kg |
| Observe service information | |
$74,50
$87,70
-16%
ADD TO BASKET
| Article number of the recommended special tool | VKN 1001 |
| Colour | black |
| Number of Teeth 1 | 130 |
| Number of Teeth 2 | 58 |
| Width 1 | 20mm |
| Width 2 | 17mm |
| Belts | with rounded tooth profile |
| More information » | |
$75,40
$88,70
-15%
ADD TO BASKET
| Multi-piece | four-piece |
$76,10
$89,60
-16%
ADD TO BASKET
| Weight | 0.9kg |
| Driven units | Camshaft |
| Vehicle configuration line / variant | HT -KTB |
| Number of Teeth | 130 |
| Width | 20mm |
| Length | 1, 040mm |
| Number of belts | 1 |
| Rollers contained | 2 |
| More information » | |
$76,30
$89,80
-16%
ADD TO BASKET
| Number of Teeth | 130 |
| Driven units | Camshaft |
| Width | 20mm |
| Number of Teeth 2 | 58 |
| Width 2 | 17mm |
| Rollers contained | 4 |
$76,80
$90,30
-15%
ADD TO BASKET
| Number of Teeth | 130, 58 |
| Width | 17mm, 20mm |
| Number of belts | 2 |
| for Art.No. | A200 |
$90,00
$105,90
-16%
ADD TO BASKET
| Length | 1, 040mm |
| Number of Teeth | 130 |
| Width | 20mm |
| Tooth Pitch | 8mm |
| Rollers contained | 3 |
$91,10
$107,20
-16%
ADD TO BASKET
| Number of Teeth 1 | 130 |
| Number of Teeth 2 | 58 |
| Width 1 | 20mm |
| Width 2 | 17mm |
| Construction Year from | 05.2000 |
$95,00
$111,70
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
