Timing belt and water pump kit VW BORA I (1J2) 1.9 TDI (74kW / 101hp) 1998 - 2013
Previous 1 2 3 4 5 6 7 Next
| Operating Mode | Hydraulic |
| SVHC | No SVHC present! |
| Vehicle Identification Number (VIN) to | 1J-2-592 782, 1J-2D352 773 |
| Block Separation | |
| Block Separation | |
| Engine Code | AXR |
| Engine no. up to | 010 000 |
| More information » | |
$41,40
$48,70
-15%
ADD TO BASKET
| Width | 31.5mm, 36mm |
| Outer Diameter | 68mm |
| Weight | 0.692kg |
| Observe service information | |
| Engine Code | AXR, ATD |
$41,40
$48,70
-15%
ADD TO BASKET
| Width 1 | 35mm |
| Outer Diameter 1 | 78mm |
| Vehicle Identification Number (VIN) | [1J-29394001;], [1J-2B123079;], [1J-2D352774;], [1J-2U403277;], [1J-2W592783;], [1M-2R120001;], [4B-2-120001;], [6H-2-023001;], [6X-2-040 001;], [8E-2-285001;], [8E-2-297101;], [9C-2-617 120;], [9N-2-050001;] |
$41,90
$49,20
-15%
ADD TO BASKET
| for OE No. | 0018351364 |
| Number of inlets/outlets | 2 |
| Operating Mode | Electric |
| Vehicle type | Bora, Jetta |
| Block Separation | |
| Construction Year from | 07.2003 |
$43,00
$50,60
-16%
ADD TO BASKET
| Surface | Smooth |
| Outer Diameter | 67.5mm |
| Width | 35mm |
| Construction Year to | 05.2005, 05.2005, 07.2010 |
| Vehicle type | Bora, Bora, Jetta |
| Driven units | Camshaft, Camshaft, Camshaft |
| Engine Code | AXR, ATD |
| Engine no. from | AXR 010001 |
| Block Separation | |
| Vehicle Identification Number (VIN) from | 1J-2-592783, 1J-2D352774 |
| Block Separation | |
| Construction Year from | 07.2003 |
| More information » | |
$43,40
$51,00
-15%
ADD TO BASKET
| Supplementary Article/Info 2 | with tensioner pulley damper |
| Length 1 | 1, 143mm |
| Width | 30mm |
| Number of Teeth | 120 |
| Fitting Position | Vehicle Front, Front Axle |
$44,80
$52,70
-15%
ADD TO BASKET
| Weight | 0.3kg |
| Observe service information | |
| Engine Code | ATD, AXR |
| Vehicle Identification Number (VIN) to | ******1J*2D352773, ******1J*2*592782, ******1J*2D352773, ******1J*2*592782 |
| Block Separation | |
| Engine no. up to | 010 000 |
$44,90
$52,80
-15%
ADD TO BASKET
| Operating Mode | Electric |
| Voltage | 12V |
| for OE No. | 078 965 561 |
| Engine Code | ATD, AXR |
$46,50
$54,80
-16%
ADD TO BASKET
| Voltage | 12V |
| Operating Mode | Electric |
| Number of pins | 2-pin connector |
| Guarantee | 3 years guarantee |
| Weight | 0.42kg |
| Always compare old and new part (in particular OE No.) | |
$51,20
$60,20
-15%
ADD TO BASKET
| Construction Year to | 05.2005, 05.2005 |
| Vehicle type | Bora, Bora |
| Engine Code | ATD, AXR |
| Vehicle Identification Number (VIN) to | 1J-2-592782, 1J-2D352773 |
| Block Separation | |
| Engine no. up to | AXR 010000 |
$51,30
$60,40
-16%
ADD TO BASKET
| Voltage | 12V |
| Length | 115mm |
| Width | 70mm |
| Height | 80mm |
| Weight | 0.21kg |
| Material | Plastic |
| Supplementary Article/Supplementary Info | without holder |
| Operating Mode | Electric |
| More information » | |
$52,70
$62,00
-15%
ADD TO BASKET
| Number of Teeth | 120 |
| Width | 30mm |
| Driven units | Camshaft |
$57,80
$68,00
-16%
ADD TO BASKET
| Voltage | 12V |
| Pressure [bar] | 0.1bar |
| Flow rate | 500l/h |
| Engine Code | ATD, AXR |
| Operating Mode | Electric |
$60,20
$70,80
-15%
ADD TO BASKET
| Number of Teeth | 120 |
| Width | 30mm |
| Number of belts | 1 |
| Weight | 1.85kg |
| Vehicle type | Bora |
$61,50
$72,40
-16%
ADD TO BASKET
| Weight | 1.2kg |
| Driven units | Camshaft |
| Vehicle configuration line / variant | HT -KTB |
| for OE No. | 038198119C |
| Number of Teeth | 120 |
| Width | 30mm |
| Length | 1, 143mm |
| Number of belts | 1 |
| Rollers contained | 2 |
| More information » | |
$61,80
$72,70
-15%
ADD TO BASKET
| Number of Teeth | 120 |
| Width | 30mm |
| Number of belts | 1 |
| Vehicle Identification Number (VIN) from | 8Z_3_000001 |
| Vehicle Identification Number (VIN) to | 8Z_2_070000 |
| Number of deflection pulleys | 1 |
| Number of tension rollers | 1 |
| Model Year from | 2003 |
| Vehicle type | Bora |
| More information » | |
$62,30
$73,30
-16%
ADD TO BASKET
| Number of belts | 1 |
| Number of track rollers | 2 |
| Width 1 | 30mm |
| Number of Teeth | 120 |
| Vehicle Identification Number (VIN) | [1J-2B123078;], [1J-2D352774;], [1J-2P394000;], [1J-2U403277;], [1J-2W592783;], [1M-2-R120 001;], [4B-2-120001;], [6H-2-013656;], [8E-2-297 101;], [9C-2-613 921;], [9N-2-050001;], [9N-2-060001;] |
$62,40
$73,40
-15%
ADD TO BASKET
| Article number of the recommended special tool | VKN 1000 |
| Belt Width | 30mm |
| Belt Material | PTFE (polytetrafluoroethylene) |
| Colour | black |
| Number of Teeth | 120 |
| Belts | with rounded tooth profile |
| Construction Year to | 12.2002 |
| Engine no. up to | 010 000 |
| Engine Code | AXR |
| More information » | |
$66,00
$77,60
-15%
ADD TO BASKET
| Article number of the recommended special tool | VKN 1000 |
| Belt Width | 30mm |
| Belt Material | PTFE (polytetrafluoroethylene) |
| Colour | black |
| Number of Teeth | 120 |
| Belts | with rounded tooth profile |
| Vehicle Identification Number (VIN) from | 1J-2-592 783, 1J-2D352 774 |
| Engine Code | ATD |
| More information » | |
$66,20
$77,90
-16%
ADD TO BASKET
| Weight | 1.3kg |
| Driven units | Camshaft |
| Vehicle configuration line / variant | HT ->0202 >010 000 |
| Number of Teeth | 120 |
| Width | 30mm |
| Length | 1, 143mm |
| Number of belts | 1 |
| Rollers contained | 2 |
| More information » | |
$67,60
$79,60
-16%
ADD TO BASKET
| Supplementary Article/Supplementary Info | without water pump |
| Observe technical data | |
| Construction Year to | 05.2005, 05.2005, 07.2010 |
| Vehicle type | Bora, Bora, Jetta |
| Driven units | Camshaft, Camshaft, Camshaft |
| Engine Code | ATD, AXR |
| Vehicle Identification Number (VIN) from | 1J-2-592783, 1J-2D352774 |
| Article number of the recommended special tool | GAT4840A, GAT4844, GAT4840A, GAT4844 |
| Block Separation | |
| Engine no. from | AXR 010001 |
| Block Separation | |
| Construction Year from | 07.2003 |
| More information » | |
$67,70
$79,70
-16%
ADD TO BASKET
| Width | 30mm |
| Number of Teeth | 120 |
| Surface | Coated |
| Belts | with rounded tooth profile |
| Weight | 1.1kg |
| Observe service information | |
| Engine Code | AXR, ATD |
| More information » | |
$68,20
$80,20
-15%
ADD TO BASKET
| Number of Teeth 1 | 120 |
| Width 1 | 30mm |
| Observe service information | |
| SVHC | No SVHC present! |
| Vehicle Identification Number (VIN) from | 1J-2-592 783, 1J-2D352 774 |
| Block Separation | |
| Block Separation | |
| Engine Code | AXR |
| Engine no. from | 010 001 |
| More information » | |
$68,40
$80,40
-15%
ADD TO BASKET
| Construction Year to | 05.2005, 05.2005 |
| Vehicle type | Bora, Bora |
| Driven units | Camshaft, Camshaft |
| Engine Code | ATD, AXR |
| Vehicle Identification Number (VIN) to | 1J-2-592782, 1J-2D352773 |
| Supplementary Article/Info 2 | without tensioner pulley damper, without tensioner pulley damper |
| Article number of the recommended special tool | GAT4840A, GAT4844, GAT4840A, GAT4844 |
| Block Separation | |
| Engine no. up to | AXR 010000 |
| More information » | |
$68,40
$80,50
-16%
ADD TO BASKET
| Number of belts | 1 |
| Number of track rollers | 2 |
| Width 1 | 30mm |
| Number of Teeth | 120 |
| Vehicle Identification Number (VIN) | [;1J-2B123078], [;1J-2D352773], [;1J-2P394000], [;1J-2U403276], [;1J-2W592782], [;1M-2-R120 000], [;4B-2-120000], [;6H-2-013655], [6X-2-040 000;], [;8E-2-297 100], [;9C-2-613 920], [;9N-2-050000], [;9N-2-060000] |
$68,60
$80,70
-15%
ADD TO BASKET
| Number of Teeth | 120 |
| Length | 1, 143mm |
| Width | 30mm |
| Tooth Pitch | 9.525mm |
| Number of track rollers | 2 |
| Supplementary Article/Info 2 | without tensioner element |
| Engine Code | ATD, AXR |
| Construction Year to | 02.2002, 02.2002 |
| Vehicle Identification Number (VIN) to | 1J..2..592 782, 1J..2D352 773 |
| Block Separation | |
| Construction Year from | 05.2001 |
| Engine no. up to | AXR 021 000 |
| More information » | |
$69,50
$81,80
-16%
ADD TO BASKET
| Number of Teeth 1 | 120 |
| Width 1 | 30mm |
| Observe service information | |
| SVHC | No SVHC present! |
| Vehicle Identification Number (VIN) to | 1J-2-592 782, 1J-2D352 773 |
| Block Separation | |
| Block Separation | |
| Engine Code | AXR |
| Engine no. up to | 010 000 |
| More information » | |
$69,80
$82,10
-15%
ADD TO BASKET
| Width | 30mm |
| Number of Teeth | 120 |
| Belts | with rounded tooth profile |
| Weight | 1.05kg |
| Units/pulleys | incl. tensioner pulley, incl. deflection pulley |
| for OE No. | 038 198 119 |
| Observe service information | |
| Engine Code | ATD, AXR |
| Vehicle Identification Number (VIN) to | ******1J*2D352773, ******1J*2*592782 |
| Block Separation | |
| Engine no. up to | 025 000 |
| More information » | |
$70,00
$82,40
-16%
ADD TO BASKET
$70,10
$82,40
-15%
ADD TO BASKET
| Number of Teeth | 120 |
| Length | 1, 143mm |
| Width | 30mm |
| Number of track rollers | 2 |
| Engine Code | ATD, AXR |
| Construction Year from | 03.2002, 03.2002 |
| Vehicle Identification Number (VIN) from | 1J..2..592 783, 1J..2D352 774 |
| Block Separation | |
| Engine no. from | AXR 021 001 |
| More information » | |
$70,90
$83,40
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
