Timing belt and water pump kit VW BORA I (1J2) 1.9 TDI (110kW / 150hp) 1998 - 2013
Previous 1 2 3 4 5 6 7 Next
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Number of grooves | 19 |
| Material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of blades/vanes | 8 |
| Weight | 0.717kg |
| Supplementary Article/Info 2 | with seal ring |
| Observe service information | |
| More information » | |
$29,60
$34,80
-15%
ADD TO BASKET
| Vehicle Identification Number (VIN) to | 1J-2W592 782, 1J-2D352 773 |
| Block Separation | |
$29,60
$34,80
-15%
ADD TO BASKET
| Operating Mode | Mechanical |
| Water pump impeller material | Plastic |
| Supplementary Article/Info 2 | with seal ring |
| Engine Code | ARL |
| for OE No. | 03L 121 011 G |
$29,60
$34,90
-16%
ADD TO BASKET
| Ø | 72mm |
| Width | 30.6mm |
| Tensioner Pulley Actuation | Hydraulic |
| Flange Ø | 82mm |
| Vehicle Identification Number (VIN) to | 1J-2-592 782, 1J-2D352 773 |
| Fitting Position | Upper Left |
$31,20
$36,70
-15%
ADD TO BASKET
| Surface | Smooth |
| Outer Diameter | 72mm |
| Width | 35mm |
| Construction Year from | 09.2000 |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) to | 1J-2-592782, 1J-2D352773 |
$31,30
$36,80
-15%
ADD TO BASKET
| Weight | 0.646kg |
| Inner Diameter | 9mm |
| Outer Diameter | 68mm |
| Packaging length | 8.3cm |
| Packaging width | 8.3cm |
| Packaging height | 4.8cm |
| Construction Year from | 05.2002 |
| Driven units | Camshaft |
| More information » | |
$31,90
$37,50
-15%
ADD TO BASKET
| Operating Mode | Mechanical |
| Supplementary Article/Info 2 | with seal ring |
| Number of Teeth | 19 |
| Water Pump Pulley Ø | 56mm |
| Impeller Ø | 64mm |
| Number of blades/vanes | 7 |
| Water pump impeller material | Metal |
| old version | |
| More information » | |
| Operating Mode | Mechanical |
| Supplementary Article/Info 2 | with seal ring |
| Number of Teeth | 19 |
| Water Pump Pulley Ø | 56mm |
| Impeller Ø | 64mm |
| Number of blades/vanes | 7 |
| Water pump impeller material | Metal |
| More information » | |
| Supplementary Article/Info 2 | without lid |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Number of Teeth | 19 |
| Belt Pulley Ø | 56.2mm |
| Weight | 0.8kg |
| Construction Year from | 05.2001 |
| Engine Code | ARL |
| More information » | |
$32,40
$38,10
-15%
ADD TO BASKET
| Voltage | 12V |
| Pressure [bar] | 0.1bar |
| Flow rate | 500l/h |
| Operating Mode | Electric |
$32,40
$38,10
-15%
ADD TO BASKET
| Width | 35mm |
| Outer Diameter | 72mm |
| Vehicle Identification Number (VIN) to | 1J-2-525000, 1J-2-D352773 |
$32,60
$38,30
-15%
ADD TO BASKET
| Outer Diameter | 72mm |
| Width | 35mm |
| Observe service information | |
| SVHC | No SVHC present! |
| Vehicle Identification Number (VIN) to | 1J-2W592 782, 1J-2D352 773 |
| Block Separation | |
$33,00
$38,80
-15%
ADD TO BASKET
| Outer Diameter | 72mm |
| Width | 35mm |
| Vehicle Identification Number (VIN) to | 1J-2-525 000, 1J-2D352 773 |
| Block Separation | |
$33,80
$39,80
-16%
ADD TO BASKET
| Weight | 0.68kg |
| Width | 31mm, 35mm |
| Outer Diameter | 72mm |
| Quantity required | 1 |
$33,90
$39,90
-16%
ADD TO BASKET
| Width of castor bearing surface | 31mm |
| Width | 35mm |
| Outer Diameter | 72mm |
| Weight | 0.68kg |
| Vehicle Identification Number (VIN) to | ******1J*2D352773, ******1J*2*592782 |
$34,70
$40,80
-15%
ADD TO BASKET
| Width 1 | 35mm |
| Outer Diameter 1 | 72mm |
| Vehicle Identification Number (VIN) | [;1J-2B123078], [;1J-2D352773], [;1J-2P394000], [;1J-2U403276], [;1J-2W592782], [;1M-2R120000], [;4B-2-120000], [;6H-2-023000], [;8E-2-285000], [;8E-2-297 100], [;9C-2-613 920], [;9N-2-050000] |
$35,10
$41,30
-16%
ADD TO BASKET
$36,10
$42,50
-16%
ADD TO BASKET
| Weight | 0.692kg |
| Width | 31.5mm, 36mm |
| Outer Diameter | 68mm |
| Quantity required | 1 |
$36,40
$42,90
-16%
ADD TO BASKET
| Voltage | 12V |
| for OE No. | 034965561A |
| Operating Mode | Electric |
| Assy./disassy. by qualified personnel required! | |
$36,80
$43,20
-15%
ADD TO BASKET
| Ø | 67mm |
| Width | 31mm |
| Tensioner Pulley Actuation | Automatic |
| Construction Year from | 01.2002 |
| Vehicle Identification Number (VIN) from | 1J-2-592 783, 1J-2D352 774 |
| Fitting Position | Upper Left |
$37,40
$44,00
-16%
ADD TO BASKET
| Tensioner Pulley Actuation | Hydraulic |
| Vehicle Identification Number (VIN) to | 1J-2-592 782, 1J-2D352 773 |
| Fitting Position | Left |
$37,80
$44,50
-16%
ADD TO BASKET
| Operating Mode | Hydraulic |
$39,70
$46,70
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with gasket/seal |
| Water Pump Type | for timing belt drive |
| Number of Teeth | 19 |
| reinforced version | |
| Observe service information | |
| Quality | Sealed with SiC/SiC |
| Water pump impeller material | Metal |
| New part without deposit | |
| Article number of the recommended special tool | 999 990 0002 |
| Housing material | Stainless Steel |
| Chemical Properties | High temperature-resistant |
| More information » | |
$39,90
$46,90
-15%
ADD TO BASKET
| Outer Diameter | 78.4mm |
| Width | 35.3mm |
| Observe service information | |
| Follow installation instructions | |
| SVHC | No SVHC present! |
| Vehicle Identification Number (VIN) from | 1J-2W592 783, 1J-2D352 774 |
| Block Separation | |
| More information » | |
$39,90
$46,90
-15%
ADD TO BASKET
| Belt Pulley Ø | 67.8mm |
| Height 1 | 31mm |
| Height 2 | 27.2mm |
| Weight | 0.7kg |
| Construction Year from | 05.2002 |
| Driven units | Camshaft |
| Vehicle configuration line / variant | 05/02> |
| for OE No. | 038109243M |
| More information » | |
$40,40
$47,50
-15%
ADD TO BASKET
| Operating Mode | Hydraulic |
| SVHC | No SVHC present! |
| Vehicle Identification Number (VIN) to | 1J-2W592 782, 1J-2D352 773 |
| Block Separation | |
$41,00
$48,20
-15%
ADD TO BASKET
| Width | 31.5mm, 36mm |
| Outer Diameter | 68mm |
| Weight | 0.692kg |
| Observe service information | |
$41,40
$48,70
-15%
ADD TO BASKET
| Width 1 | 35mm |
| Outer Diameter 1 | 78mm |
$41,90
$49,20
-15%
ADD TO BASKET
| Surface | Smooth |
| Outer Diameter | 67.5mm |
| Width | 35mm |
| Construction Year from | 09.2000 |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) from | 1J-2-592783 |
| Vehicle Identification Number (VIN) to | 1J-2D352774 |
| More information » | |
$43,40
$51,00
-15%
ADD TO BASKET
| Supplementary Article/Info 2 | with tensioner pulley damper |
| Length 1 | 1, 143mm |
| Width | 30mm |
| Number of Teeth | 120 |
| Fitting Position | Vehicle Front, Front Axle |
| Vehicle Identification Number (VIN) from | 1J2592783/2D352774 |
| Construction Year from | 09.2000 |
| More information » | |
$44,80
$52,70
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
