Timing belt and water pump kit VW BORA Variant (1J6) 1.9 TDI 4motion (74kW / 101hp) 1999 - 2005
Previous 1 2 3 4 5 6 7 Next
| Vehicle Identification Number (VIN) to | 1J-2-592782, 1J-2D352773 |
| Block Separation | |
$26,90
$31,60
-15%
ADD TO BASKET
| Weight | 0.793kg |
| Packaging length | 13cm |
| Packaging width | 13cm |
| Packaging height | 16cm |
| Supplementary Article/Supplementary Info | with gasket/seal |
| Construction Year to | 05.2003 |
$27,10
$31,90
-16%
ADD TO BASKET
| Supplementary Article/Info 2 | with seal ring |
| Operating Mode | Mechanical |
| Water pump impeller material | Metal |
| Engine Code | ATD |
$27,30
$32,10
-15%
ADD TO BASKET
| Number of Teeth | 120 |
| Length | 1, 143mm |
| Width | 30mm |
| Tooth Pitch | 9.525mm |
$27,80
$32,70
-15%
ADD TO BASKET
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Number of grooves | 19 |
| Material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of blades/vanes | 8 |
| Weight | 0.717kg |
| Supplementary Article/Info 2 | with seal ring |
| Observe service information | |
| More information » | |
$27,90
$32,80
-15%
ADD TO BASKET
| Water Pump Type | for timing belt drive |
| Number of Teeth | 19 |
| Supplementary Article/Supplementary Info | with gasket/seal |
| SVHC | No SVHC present! |
$28,60
$33,70
-16%
ADD TO BASKET
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Number of grooves | 19 |
| Material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of blades/vanes | 8 |
| Weight | 0.717kg |
| Supplementary Article/Info 2 | with seal ring |
| Observe service information | |
| More information » | |
$29,60
$34,80
-15%
ADD TO BASKET
| Vehicle Identification Number (VIN) to | 1J-2-592 782, 1J-2D352 773 |
| Block Separation | |
$29,60
$34,80
-15%
ADD TO BASKET
| Operating Mode | Mechanical |
| Water pump impeller material | Plastic |
| Supplementary Article/Info 2 | with seal ring |
| Engine Code | ATD |
| for OE No. | 03L 121 011 G |
$29,60
$34,90
-16%
ADD TO BASKET
| Ø | 72mm |
| Width | 30.6mm |
| Tensioner Pulley Actuation | Hydraulic |
| Flange Ø | 82mm |
| Construction Year to | 12.2002 |
| Vehicle Identification Number (VIN) to | 1J-2-525 000, 1J-2D352 773 |
| Fitting Position | Upper Left |
| More information » | |
$31,20
$36,70
-15%
ADD TO BASKET
| Surface | Smooth |
| Outer Diameter | 72mm |
| Width | 35mm |
| Construction Year to | 05.2003 |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) to | 1J-2-592782, 1J-2D352773 |
$31,30
$36,80
-15%
ADD TO BASKET
| Weight | 0.646kg |
| Inner Diameter | 9mm |
| Outer Diameter | 68mm |
| Packaging length | 8.3cm |
| Packaging width | 8.3cm |
| Packaging height | 4.8cm |
| Construction Year from | 05.2002 |
| Construction Year to | 05.2003 |
| Driven units | Camshaft |
| More information » | |
$31,90
$37,50
-15%
ADD TO BASKET
| Operating Mode | Mechanical |
| Supplementary Article/Info 2 | with seal ring |
| Number of Teeth | 19 |
| Water Pump Pulley Ø | 56mm |
| Impeller Ø | 64mm |
| Number of blades/vanes | 7 |
| Water pump impeller material | Metal |
| old version | |
| More information » | |
| Operating Mode | Mechanical |
| Supplementary Article/Info 2 | with seal ring |
| Number of Teeth | 19 |
| Water Pump Pulley Ø | 56mm |
| Impeller Ø | 64mm |
| Number of blades/vanes | 7 |
| Water pump impeller material | Metal |
| More information » | |
| Supplementary Article/Info 2 | without lid |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Number of Teeth | 19 |
| Belt Pulley Ø | 56.2mm |
| Weight | 0.8kg |
| Construction Year to | 05.2003 |
| Engine Code | ATD |
| More information » | |
$32,40
$38,10
-15%
ADD TO BASKET
| Voltage | 12V |
| Pressure [bar] | 0.1bar |
| Flow rate | 500l/h |
| Operating Mode | Electric |
$32,40
$38,10
-15%
ADD TO BASKET
| Width | 35mm |
| Outer Diameter | 72mm |
| Vehicle Identification Number (VIN) to | 1J-2-525000, 1J-2-D352773 |
| Block Separation | |
| Engine no. up to | 010000 |
$32,60
$38,30
-15%
ADD TO BASKET
| Outer Diameter | 72mm |
| Width | 35mm |
| Engine Code | ATD |
| Vehicle Identification Number (VIN) to | 1J-2-525 000, 1J-2D352 773 |
| Block Separation | |
| Engine no. up to | 010 000 |
$33,80
$39,80
-16%
ADD TO BASKET
| Weight | 0.68kg |
| Width | 31mm, 35mm |
| Outer Diameter | 72mm |
| Quantity required | 1 |
$33,90
$39,90
-16%
ADD TO BASKET
| Outer Diameter | 72mm |
| Width | 35mm |
| Observe service information | |
| SVHC | No SVHC present! |
| Vehicle Identification Number (VIN) to | 1J-2-592 782, 1J-2D352 773 |
| Block Separation | |
$34,00
$40,00
-15%
ADD TO BASKET
| Width of castor bearing surface | 31mm |
| Width | 35mm |
| Outer Diameter | 72mm |
| Weight | 0.68kg |
| Vehicle Identification Number (VIN) to | ******1J*2D352773, ******1J*2*592782 |
$34,70
$40,80
-15%
ADD TO BASKET
| Width 1 | 35mm |
| Outer Diameter 1 | 72mm |
| Vehicle Identification Number (VIN) | [;1J-2B123078], [;1J-2D352773], [;1J-2P394000], [;1J-2U403276], [;1J-2W592782], [;1M-2R120000], [;4B-2-120000], [;6H-2-023000], [;8E-2-285000], [;8E-2-297 100], [;9C-2-613 920], [;9N-2-050000] |
$35,10
$41,30
-16%
ADD TO BASKET
$36,10
$42,50
-16%
ADD TO BASKET
| Weight | 0.692kg |
| Width | 31.5mm, 36mm |
| Outer Diameter | 68mm |
| Quantity required | 1 |
$36,40
$42,90
-16%
ADD TO BASKET
| Voltage | 12V |
| for OE No. | 034965561A |
| Operating Mode | Electric |
| Assy./disassy. by qualified personnel required! | |
$36,80
$43,20
-15%
ADD TO BASKET
| Ø | 67mm |
| Width | 31mm |
| Tensioner Pulley Actuation | Automatic |
| Construction Year from | 01.2002 |
| Vehicle Identification Number (VIN) from | 1J-2-525 001, 1J-2D352 774 |
| Fitting Position | Upper Left |
$37,40
$44,00
-16%
ADD TO BASKET
| Tensioner Pulley Actuation | Hydraulic |
| Construction Year to | 12.2002 |
| Vehicle Identification Number (VIN) to | 1J-2-525 000, 1J-2D352 773 |
| Fitting Position | Left |
$37,80
$44,50
-16%
ADD TO BASKET
| Operating Mode | Hydraulic |
$39,70
$46,70
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with gasket/seal |
| Water Pump Type | for timing belt drive |
| Number of Teeth | 19 |
| reinforced version | |
| Observe service information | |
| Quality | Sealed with SiC/SiC |
| Water pump impeller material | Metal |
| New part without deposit | |
| Article number of the recommended special tool | 999 990 0002 |
| Housing material | Stainless Steel |
| Chemical Properties | High temperature-resistant |
| More information » | |
$39,90
$46,90
-15%
ADD TO BASKET
| Belt Pulley Ø | 67.8mm |
| Height 1 | 31mm |
| Height 2 | 27.2mm |
| Weight | 0.7kg |
| Construction Year from | 05.2002 |
| Driven units | Camshaft |
| Vehicle configuration line / variant | 05/02> |
| for OE No. | 038109243M |
| More information » | |
$40,40
$47,50
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
