Timing Belt / Tensioner / Guide VW BORA I (1J2) 1.9 TDI 4motion (96kW / 130hp) 1998 - 2013
Previous 1 2 3 4 5 6 Next
| Width | 29mm |
| Outer Diameter | 72mm |
$13,70
$16,10
-15%
ADD TO BASKET
$13,90
$16,30
-15%
ADD TO BASKET
| Belt Pulley Ø | 40mm |
| Height 1 | 36.6mm |
| Height 2 | 51.2mm |
| Weight | 0.2kg |
| Vehicle Identification Number (VIN) from | 1J_2_592 783 |
| Driven units | Camshaft |
| Vehicle configuration line / variant | 0302> , ASZ , |
| for OE No. | 038109244J |
| More information » | |
$14,60
$17,10
-15%
ADD TO BASKET
| Belt Pulley Ø | 28.5mm |
| Height 1 | 34mm |
| Height 2 | 34mm |
| Weight | 0.1kg |
| Vehicle Identification Number (VIN) to | 1J_2_592 782 |
| Driven units | Camshaft |
| Vehicle configuration line / variant | >0202 , ASZ , |
| for OE No. | 03L109244C |
| More information » | |
$15,30
$18,00
-15%
ADD TO BASKET
| Outer Diameter 1 | 80mm |
| Width 1 | 47mm |
| Driven units | Water Pump |
| Fitting Position | Right |
$15,60
$18,30
-15%
ADD TO BASKET
| Width | 19mm |
| Weight | 0.24kg |
| Outer Diameter | 60mm |
$15,70
$18,50
-16%
ADD TO BASKET
| Fitting Position | inner, Cylinder Head, Upper |
| Number of mounting bores | 2 |
| Components deviate from OE | |
| Supplementary Article/Info 2 | with heat shield, without sealing plug |
| Material | Polyamid 6.6, GRP (Glass fibre Reinforced Plastic) |
| Vehicle Identification Number (VIN) from | 1J-2-592783, 1J-2D352774 |
$16,40
$19,30
-16%
ADD TO BASKET
| Weight | 0.23kg |
| Length | 320mm |
| Width | 200mm |
| Height | 80mm |
$16,80
$19,80
-16%
ADD TO BASKET
| Fitting Position | inner |
| Number of Teeth | 120 |
| Length | 1, 143mm |
| Width | 30mm |
| Belts | with rounded tooth profile |
| Driven units | Camshaft |
| Construction Year from | 04.2001 |
| Construction Year to | 05.2003 |
| More information » | |
$20,00
$23,50
-15%
ADD TO BASKET
| Vehicle Identification Number (VIN) from | 1J-2-592783, 1J-2D352774 |
$20,30
$23,90
-16%
ADD TO BASKET
| Weight | 830g |
| Ø | 72mm |
| Width | 35mm |
$20,90
$24,60
-16%
ADD TO BASKET
| Weight | 650g |
| Ø | 78.5mm |
| Width | 35.2mm |
$21,30
$25,00
-15%
ADD TO BASKET
| Width | 35.3mm |
| Outer Diameter | 78.4mm |
| Vehicle Identification Number (VIN) from | 1J-2W592 783, 1J-2D352 774 |
| Block Separation | |
$21,60
$25,40
-15%
ADD TO BASKET
| Ø | 67mm |
| Width | 31mm |
| Tensioner Pulley Actuation | Automatic |
$23,50
$27,60
-15%
ADD TO BASKET
| Width | 30mm |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of Teeth | 120 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
| Weight | 0.18kg |
| Observe service information | |
| More information » | |
$23,50
$27,70
-16%
ADD TO BASKET
| Width | 35mm |
| Outer Diameter | 72mm |
| Supplementary Article/Supplementary Info | with fastening/mounting material |
| Supplementary Article/Info 2 | with nut |
| Vehicle Identification Number (VIN) to | 1J-2-592 782 |
$24,20
$28,50
-16%
ADD TO BASKET
| Width | 30mm |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of Teeth | 120 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
| Weight | 0.26kg |
$24,80
$29,20
-16%
ADD TO BASKET
| Ø | 72mm |
| Width | 31mm |
| Tensioner Pulley Actuation | Hydraulic |
$25,40
$29,80
-15%
ADD TO BASKET
| for OE No. | 1119023 |
$26,00
$30,60
-16%
ADD TO BASKET
| Vehicle Identification Number (VIN) to | 1J-2-592 782, 1J-2D352 773 |
$26,00
$30,60
-16%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Colour | black |
| Number of Teeth | 120 |
| Width | 30mm |
| Tooth Pitch | 9.525mm |
| Length | 1, 143mm |
| Construction Year from | 04.2001 |
| Construction Year to | 05.2003 |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT4840A, GAT4844 |
| More information » | |
$26,00
$30,60
-16%
ADD TO BASKET
| Number of Teeth | 120 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.17kg |
| Width | 30mm |
| Tooth Pitch | 9.525mm |
| Construction Year from | 04.2001 |
| Construction Year to | 05.2003 |
| Driven units | Camshaft |
| More information » | |
$26,40
$31,00
-15%
ADD TO BASKET
| Number of Teeth | 120 |
| Width | 30mm |
| Driven units | Camshaft |
| Vehicle configuration line / variant | HT -ASZ |
| for OE No. | 038109119P |
$26,90
$31,60
-15%
ADD TO BASKET
| Vehicle Identification Number (VIN) to | 1J-2W592782, 1J-2D352773 |
| Block Separation | |
$26,90
$31,60
-15%
ADD TO BASKET
| Number of Teeth | 120 |
| Length | 1, 143mm |
| Width | 30mm |
| Tooth Pitch | 9.525mm |
$27,80
$32,70
-15%
ADD TO BASKET
| Vehicle Identification Number (VIN) to | 1J-2W592 782, 1J-2D352 773 |
| Block Separation | |
$29,60
$34,80
-15%
ADD TO BASKET
| Ø | 72mm |
| Width | 30.6mm |
| Tensioner Pulley Actuation | Hydraulic |
| Flange Ø | 82mm |
| Construction Year to | 12.2002 |
| Vehicle Identification Number (VIN) to | 1J-2-592 782, 1J-2D352 773 |
$31,20
$36,70
-15%
ADD TO BASKET
| Surface | Smooth |
| Outer Diameter | 72mm |
| Width | 35mm |
| Construction Year from | 04.2001 |
| Construction Year to | 05.2003 |
| Driven units | Camshaft |
| Vehicle Identification Number (VIN) to | 1J-2-592782, 1J-2D352773 |
| More information » | |
$31,30
$36,80
-15%
ADD TO BASKET
| Weight | 0.646kg |
| Inner Diameter | 9mm |
| Outer Diameter | 68mm |
| Packaging length | 8.3cm |
| Packaging width | 8.3cm |
| Packaging height | 4.8cm |
| Construction Year from | 03.2002 |
| Construction Year to | 05.2003 |
| Vehicle Identification Number (VIN) from | 1J2592783 |
| Driven units | Camshaft |
| More information » | |
$31,90
$37,50
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
