Joint / Set VW GOLF II (19E, 1G1) 1.6 (51kW / 70hp) 1983 - 1992
Previous 1 2 Next
| Fitting Position | transmission sided, Front Axle |
20,40€
23,90€
-15%
ADD TO BASKET
| Fitting Position | transmission sided |
| Length | 32mm |
| Tooth Gaps, profile shaft conn. | 33 |
| Outer Diameter | 94mm |
| Joint Type | CV Joint |
| Drive Shaft | without ABS ring |
| Fabrication Number | NPW-VW-068 |
| More information » | |
20,60€
24,20€
-15%
ADD TO BASKET
| Tooth Gaps, profile shaft conn. | 33 |
| Length | 32mm |
| Fitting Position | Wheel Side |
| Specification | Groove type: INNER |
21,30€
25,10€
-16%
ADD TO BASKET
| Fitting Position | Front Axle, transmission sided |
| Joint Type | CV Joint |
| Height | 32mm |
| Tooth Gaps, transm. side connection | 33 |
| Outer Diameter | 94mm |
21,60€
25,40€
-15%
ADD TO BASKET
| Fitting Position | Front Axle |
| External Toothing differential side | 33 |
| Specification | BELL PIN LENGTH - 32 |
| Transmission Type | Manual Transmission |
22,20€
26,20€
-16%
ADD TO BASKET
| Fitting Position | Front Axle, transmission sided |
| Joint Type | CV Joint |
| Joint Ø | 94mm |
| Tooth Gaps, transm. side connection | 33 |
| Transmission Type | Manual Transmission, Fully Automatic |
22,40€
26,40€
-16%
ADD TO BASKET
| Fitting Position | Front Axle, Wheel Side |
| Internal Toothing wheel side | 30 |
| External Toothing wheel side | 22 |
| Joint Type | CV Joint |
| Transmission Type | Automatic Transmission, Manual Transmission |
29,10€
34,30€
-16%
ADD TO BASKET
| Joint Type | CV Joint |
| for OE No. | 6Q0 498 103 A |
| Fitting Position | transmission sided, Front Axle |
| Weight | 1.54kg |
| Vehicle Identification Number (VIN) from | 17-D-641910 |
| Vehicle Identification Number (VIN) to | 1G-N-300000 |
| Transmission Type | Manual Transmission, Fully Automatic |
| More information » | |
29,60€
34,80€
-15%
ADD TO BASKET
| Weight | 1.5kg |
| Observe service information | |
| Fitting Position | Wheel Side, Front Axle |
31,20€
36,70€
-15%
ADD TO BASKET
| Fitting Position | transmission sided |
| Tooth Gaps, profile shaft conn. | 33 |
| Joint Type | CV Joint |
| Drive Shaft | without ABS ring |
| Transmission Type | Automatic Transmission, Manual Transmission |
32,50€
38,20€
-15%
ADD TO BASKET
| Fitting Position | Front Axle, transmission sided |
| Weight | 1.61kg |
| Tooth Gaps, transm. side connection | 33 |
| Outer Diameter | 94mm |
| Joint Type | Disc Joint |
| Packaging length | 20cm |
| Packaging width | 10.5cm |
| Packaging height | 10.5cm |
| Model Year from | 1987 |
| Model Year to | 1988 |
| More information » | |
32,60€
38,40€
-16%
ADD TO BASKET
| Joint Type | CV Joint |
| External Toothing wheel side | 22 |
| Internal Toothing wheel side | 30 |
| Seal diam. | 53mm |
| Machined | without groove in internal component |
| Joint Ø | 81mm |
| Length | 130mm |
| Thread Size | M20x1.5 |
| Bellows Material | NBR (nitrile butadiene rubber) |
| New Part | |
| Supplementary Article/Info 2 | with nut |
| Fitting Position | Wheel Side, Front Axle Left, Front Axle Right |
| Transmission Type | Manual Transmission, Automatic Transmission |
| More information » | |
33,90€
39,80€
-15%
ADD TO BASKET
| Joint Type | CV Joint |
| External Toothing wheel side | 22 |
| Internal Toothing wheel side | 30 |
| Seal diam. | 53mm |
| Machined | without groove in internal component |
| Joint Ø | 81mm |
| Length | 130mm |
| Thread Size | M20x1.5 |
| Bellows Material | NBR (nitrile butadiene rubber) |
| New Part | |
| Supplementary Article/Info 2 | with nut |
| Fitting Position | Wheel Side, Front Axle Left, Front Axle Right |
| Transmission Type | Manual Transmission, Automatic Transmission |
| More information » | |
35,70€
42,00€
-15%
ADD TO BASKET
| Fitting Position | transmission sided, Front Axle |
| Weight | 1.932kg |
| Tooth Gaps, transm. side connection | 33 |
| Seal diam. | 100mm |
| Outer Diameter | 99mm |
| Joint Type | Disc Joint |
| Packaging length | 20cm |
| Packaging width | 10.5cm |
| Packaging height | 10.5cm |
| for model year | 1987 |
| More information » | |
37,90€
44,60€
-16%
ADD TO BASKET
| Length | 32mm |
| Bore Ø | 8.2mm |
| Tooth Gaps, profile shaft conn. | 33 |
| Number of bores | 6 |
| Outer Diameter | 94mm |
| Bolt Hole Circle Ø | 78mm |
| Joint Type | Disc Joint |
| Machined | with groove in inner part (inside) |
| Engine Code | PN |
| Fitting Position | transmission sided, Front Axle |
| More information » | |
39,20€
46,10€
-15%
ADD TO BASKET
| Joint Type | Disc Joint |
| Tooth Gaps, profile shaft conn. | 33 |
| Machined | without groove in internal component |
| Joint Ø | 94mm |
| Length | 32mm |
| Supplementary Article/Info 2 | with cap |
| Bore Ø | 8.2mm |
| Number of bores | 6 |
| Bolt Hole Circle Ø | 78mm |
| Bellows Material | NBR (nitrile butadiene rubber) |
| New Part | |
| Fitting Position | transmission sided, Front Axle Left, Front Axle Right |
| Transmission Type | Manual Transmission, Automatic Transmission |
| More information » | |
40,20€
47,30€
-16%
ADD TO BASKET
| Joint Type | Disc Joint |
| Length | 32mm |
| Machined | without groove in internal component |
| Tooth Gaps, profile shaft conn. | 33 |
| Joint Ø | 94mm |
| Bore Ø | 8.2mm |
| Number of bores | 6 |
| Bolt Hole Circle Ø | 78mm |
| New Part | |
| Fitting Position | transmission sided, Front Axle Left, Front Axle Right |
| Transmission Type | Manual Transmission, Automatic Transmission |
| More information » | |
42,00€
49,40€
-15%
ADD TO BASKET
| Joint Type | Disc Joint |
| Tooth Gaps, profile shaft conn. | 33 |
| Machined | without groove in internal component |
| Joint Ø | 94mm |
| Length | 32mm |
| Supplementary Article/Info 2 | with cap |
| Bore Ø | 8.2mm |
| Number of bores | 6 |
| Bolt Hole Circle Ø | 78mm |
| Bellows Material | NBR (nitrile butadiene rubber) |
| New Part | |
| Fitting Position | transmission sided, Front Axle Left, Front Axle Right |
| Transmission Type | Manual Transmission, Automatic Transmission |
| More information » | |
46,50€
54,70€
-15%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
