Timing Belt / Tensioner / Guide VW BORA I (1J2) 1.6 FSI (81kW / 110hp) 1998 - 2013
Previous 1 2 3 4 Next
| Outer Diameter | 60mm |
| Width | 18.7mm |
| SVHC | No SVHC present! |
$19,50
$22,90
-15%
ADD TO BASKET
| Width | 25.2mm |
| Outer Diameter | 60mm |
| Height | 54mm |
$20,20
$23,80
-16%
ADD TO BASKET
| Outer Diameter 1 | 60mm |
| Width 1 | 18mm |
| Driven units | Camshaft |
$20,30
$23,90
-16%
ADD TO BASKET
| Ø | 60mm |
| Width | 25mm |
| Tensioner Pulley Actuation | Automatic |
| Supplementary Article/Info 2 | with fastening material |
| Fitting Position | Lower Left |
| Driven units | Camshaft |
$20,50
$24,20
-16%
ADD TO BASKET
| Number of Teeth | 130 |
| Packaging length | 25.5cm |
| Packaging width | 16cm |
| Packaging height | 3cm |
| Weight | 0.18kg |
| Width | 20mm |
| Tooth Pitch | 8mm |
| 2 Belts | |
| Width 2 | 17mm |
| Number of Teeth 2 | 58 |
| Driven units | Camshaft |
| More information » | |
$20,70
$24,40
-16%
ADD TO BASKET
| Ø | 60mm |
| Width | 18.8mm |
| Driven units | Camshaft |
$20,80
$24,40
-15%
ADD TO BASKET
| Ø | 60mm |
| Width | 19mm |
| Tensioner Pulley Actuation | Automatic |
| Fitting Position | Upper |
$21,10
$24,80
-15%
ADD TO BASKET
| Width of castor bearing surface | 54mm |
| Width | 25mm |
| Inner Diameter | 8mm |
| Outer Diameter | 60mm |
| Weight | 0.326kg |
$22,00
$25,80
-15%
ADD TO BASKET
| Outer Diameter | 60mm |
| Width | 24mm |
| Observe service information | |
| Follow installation instructions | |
| SVHC | No SVHC present! |
$22,10
$26,00
-15%
ADD TO BASKET
| Outer Diameter 1 | 60mm |
| Width 1 | 24mm |
| Driven units | Water Pump |
$22,50
$26,50
-16%
ADD TO BASKET
| Surface | Smooth |
| Outer Diameter | 60mm |
| Width | 25.5mm |
| Driven units | Camshaft |
$23,80
$28,00
-15%
ADD TO BASKET
| Inner Diameter | 8mm |
| Outer Diameter | 60mm |
| Width | 25mm |
| Material | Plastic |
| Supplementary Article/Info 2 | with screw |
| Driven units | Camshaft |
$24,60
$28,90
-15%
ADD TO BASKET
| Outer Diameter | 60mm |
| Width | 24mm |
$25,40
$29,90
-16%
ADD TO BASKET
| Width | 17mm |
| Number of Teeth | 58 |
| Belts | with rounded tooth profile |
| Weight | 0.47kg |
| Observe service information | |
$30,40
$35,70
-15%
ADD TO BASKET
| Number of Teeth | 130 |
| Width | 20mm |
| Engine Code | BAD |
| Driven units | Camshaft |
$31,50
$37,00
-15%
ADD TO BASKET
$44,70
$52,60
-16%
ADD TO BASKET
| Weight | 0.4kg |
| Driven units | Camshaft |
| Vehicle configuration line / variant | HT -BAD # BAD |
| Number of Teeth | 58 |
| Width | 17mm |
| Length | 464mm |
| Number of belts | 1 |
| Rollers contained | 1 |
| More information » | |
$52,10
$61,30
-16%
ADD TO BASKET
| Number of Teeth | 58 |
| Number of Teeth 2 | 130 |
| Length | 464mm |
| Length 2 | 1, 040mm |
| Width | 17mm |
| Width 2 | 20mm |
| Tooth Pitch | 8mm |
| Number of track rollers | 4 |
| More information » | |
$64,50
$75,90
-16%
ADD TO BASKET
| Number of track rollers | 4 |
| Number of belts | 2 |
| Width 2 | 17mm |
| Width 1 | 20mm |
| Number of Teeth | 130 |
| Number of Teeth 2 | 58 |
| Vehicle Identification Number (VIN) | [;1J-6-050000], [;1K-6-250000], [;2K-6-150 000], [9C-7-550 001;], [;9N-7-000 000] |
| More information » | |
$65,40
$76,90
-15%
ADD TO BASKET
| Number of belts | 2 |
| Number of Teeth 1 | 130 |
| Width 1 | 20mm |
| Number of Teeth 2 | 58 |
| Width 2 | 17mm |
| Observe service information | |
| Follow installation instructions | |
| SVHC | No SVHC present! |
| More information » | |
$67,60
$79,50
-15%
ADD TO BASKET
| Weight | 1.4kg |
| Driven units | Camshaft |
| Vehicle configuration line / variant | HT -BAD # BAD |
| for OE No. | 036198119E |
| Number of Teeth | 130 |
| Width | 20mm |
| Length | 1, 040mm |
| Number of Teeth 1 | 58 |
| Width 1 | 17mm |
| Length 1 | 464mm |
| Number of belts | 2 |
| 2 Belts | |
| Rollers contained | 4 |
| More information » | |
$68,90
$81,10
-16%
ADD TO BASKET
| Width | 17mm, 20mm |
| Number of Teeth | 130, 58 |
| Belts | with rounded tooth profile |
| Weight | 1.5kg |
| Observe service information | |
$69,10
$81,30
-16%
ADD TO BASKET
| Observe technical data | |
| Driven units | 2.Camshaft |
| Article number of the recommended special tool | GAT4635, GAT4634 |
$70,20
$82,60
-16%
ADD TO BASKET
| Packaging length | 26.5cm |
| Packaging width | 16.5cm |
| Packaging height | 9.5cm |
| Weight | 1.4kg |
| Number of Teeth | 130 |
| Width | 20mm |
| 2 Belts | |
| Width 2 | 17mm |
| Number of Teeth 2 | 58 |
| Rollers contained | 4 |
| Driven units | Camshaft |
| More information » | |
$74,50
$87,60
-15%
ADD TO BASKET
| Width | 17mm, 20mm |
| Number of Teeth | 130, 58 |
| Belts | with rounded tooth profile |
| Weight | 1.5kg |
| Observe service information | |
$74,50
$87,70
-16%
ADD TO BASKET
| Article number of the recommended special tool | VKN 1001 |
| Colour | black |
| Number of Teeth 1 | 130 |
| Number of Teeth 2 | 58 |
| Width 1 | 20mm |
| Width 2 | 17mm |
| Belts | with rounded tooth profile |
| More information » | |
$75,40
$88,70
-15%
ADD TO BASKET
| Multi-piece | four-piece |
$76,10
$89,60
-16%
ADD TO BASKET
| Weight | 0.9kg |
| Driven units | Camshaft |
| Vehicle configuration line / variant | HT -BAD # BAD |
| Number of Teeth | 130 |
| Width | 20mm |
| Length | 1, 040mm |
| Number of belts | 1 |
| Rollers contained | 2 |
| More information » | |
$76,30
$89,80
-16%
ADD TO BASKET
| Number of Teeth | 130 |
| Driven units | Camshaft |
| Width | 20mm |
| Number of Teeth 2 | 58 |
| Width 2 | 17mm |
| Rollers contained | 4 |
$76,80
$90,30
-15%
ADD TO BASKET
| Number of Teeth | 130, 58 |
| Width | 17mm, 20mm |
| Number of belts | 2 |
| for Art.No. | A200 |
$90,00
$105,90
-16%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
