Radial Oil Seal / Set VW BORA Variant (1J6) 1.4 16V (55kW / 75hp) 1999 - 2005
| Inner Diameter | 32mm |
| Outer Diameter | 47mm |
| Height | 10mm |
| Swirl Type | Alternating Twist |
| Engine Code | AKQ |
| Fitting Position | frontal sided |
$1,80
$2,10
-15%
ADD TO BASKET
| for manufacturer number | 8707028 |
| Fitting Position | frontal sided |
$2,20
$2,60
-16%
ADD TO BASKET
| Fitting Position | frontal sided |
| Fabrication Number | NUP-VW-016 |
| for OE No. | 036103085H |
| Inner Diameter 1 | 32mm |
| Outer Diameter 1 | 42mm |
| Material | FPM (fluoride rubber) |
| Dust Cover | with dust lip |
| Swirl Type | Right-hand Twist |
| More information » | |
$2,50
$2,90
-14%
ADD TO BASKET
| Fitting Position | frontal sided |
| Outer Diameter 1 | 42mm |
| Material | FPM (fluoride rubber) |
| for OE No. | 036103085H |
| Height 1 | 8mm |
| Dust Cover | with dust lip |
| Swirl Type | Right-hand Twist |
| Inner Diameter 1 | 32mm |
| Engine Code | AHW, AXP, BCA |
| More information » | |
$3,80
$4,50
-16%
ADD TO BASKET
| Fitting Position | frontal sided |
| Height | 7mm |
| Outer Diameter | 42mm |
| Inner Diameter | 32mm |
| Material | NBR (nitrile butadiene rubber) |
| Construction Year to | 10.2001 |
| Engine Code | AHW |
| More information » | |
| Inner Diameter | 32mm |
| Outer Diameter | 42mm |
| Height | 6mm |
| Radial Shaft Seal Design | AW/BS |
| Swirl Type | Right-hand Twist |
| Material | FPM (fluoride rubber) |
| Dust Cover | with dust lip |
| Fitting Position | frontal sided |
| More information » | |
$5,00
$5,80
-14%
ADD TO BASKET
| Material | FPM (fluoride rubber) |
| Inner Diameter | 32mm |
| Outer Diameter | 42mm |
| Height | 6mm |
| Radial Shaft Seal Design | A SL |
| Swirl Type | Right-hand Twist |
| Height 1 | 7mm |
| Fitting Position | frontal sided, frontal sided, frontal sided, frontal sided, frontal sided |
| Engine Code | AHW, AKQ, APE, AXP, BCA |
| Block Separation | |
| Block Separation | |
| Block Separation | |
| Block Separation | |
| More information » | |
$5,00
$5,90
-16%
ADD TO BASKET
| Inner Diameter | 32mm |
| Outer Diameter | 42mm |
| Height | 7mm |
| Fitting Position | frontal sided, frontal sided, frontal sided |
| Engine Code | AHW, AXP, BCA, APE |
| Block Separation | |
| Construction Year to | 10.2001 |
| Block Separation | |
| More information » | |
$5,80
$6,90
-16%
ADD TO BASKET
| Inner Diameter | 85mm |
| Outer Diameter | 105mm |
| Height | 12mm |
| Engine Code | AKQ |
| Fitting Position | transmission sided |
$8,50
$10,00
-15%
ADD TO BASKET
| Fitting Position | Pulley side |
$11,60
$13,60
-15%
ADD TO BASKET
| Material | PTFE (polytetrafluoroethylene) |
| Supplementary Article/Info 2 | with flange |
| Fitting Position | transmission sided, transmission sided |
| Vehicle Identification Number (VIN) from | 1J2650001 |
| Engine Code | AXP, BCA |
| Block Separation | |
$13,50
$15,90
-16%
ADD TO BASKET
| Fitting Position | transmission sided |
| Fabrication Number | NUP-VW-021 |
$17,00
$20,00
-15%
ADD TO BASKET
| Transmission Type | Manual Transmission |
| Material | PTFE (polytetrafluoroethylene) |
| for OE No. | 030103171H |
| Fitting Position | transmission sided |
| Engine Code | APE |
$17,80
$20,90
-15%
ADD TO BASKET
| for manufacturer number | 8707014 |
| Fitting Position | transmission sided |
$19,00
$22,30
-15%
ADD TO BASKET
| Fitting Position | transmission sided |
$19,00
$22,30
-15%
ADD TO BASKET
| Fitting Position | transmission sided |
| Fabrication Number | NUP-VW-019 |
$19,10
$22,50
-16%
ADD TO BASKET
| for manufacturer number | 8707021 |
| Fitting Position | transmission sided |
$19,40
$22,80
-15%
ADD TO BASKET
| Fitting Position | transmission sided |
| Inner Diameter | 85mm |
| Housing Type | with housing |
| Supplementary Article/Info 2 | with mounting sleeve |
| Engine Code | AXP |
| Vehicle Identification Number (VIN) to | 1J-2-650 000 |
$21,70
$25,50
-15%
ADD TO BASKET
| Fitting Position | transmission sided |
| Inner Diameter | 85mm |
| Housing Type | with housing |
| Supplementary Article/Info 2 | with mounting sleeve |
| Engine Code | AXP |
| Vehicle Identification Number (VIN) from | 1J-2-650 001 |
$25,10
$29,50
-15%
ADD TO BASKET
| Fitting Position | transmission sided |
| Weight | 0.14kg |
| Inner Diameter | 85mm |
| Material | PTFE (polytetrafluoroethylene) |
| Quantity required | 1 |
| Supplementary Article/Info 2 | with flange |
$25,30
$29,80
-16%
ADD TO BASKET
| for manufacturer number | 8707026 |
| Fitting Position | transmission sided |
$26,00
$30,50
-15%
ADD TO BASKET
| Fitting Position | transmission sided |
| Housing Type | with housing |
| Housing material | Plastic |
| Supplementary Article/Supplementary Info | with pulse generator wheel |
| Supplementary Article/Info 2 | without RPM sensor |
| Sealing lip material | PTFE (polytetrafluoroethylene) |
| Vehicle Identification Number (VIN) from | 1J-2-500001 |
| More information » | |
$31,90
$37,50
-15%
ADD TO BASKET
| Fitting Position | transmission sided |
| Outer Diameter 1 | 131mm |
| Material | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Height 1 | 16.8mm |
| Supplementary Article/Info 2 | with flange, with mounting sleeve |
| Outer Diameter 2 | 152mm |
| Inner Diameter 1 | 85mm |
| Engine Code | AXP, BCA |
| Vehicle Identification Number (VIN) from | 1J2650001 |
| Block Separation | |
| More information » | |
$33,90
$39,90
-16%
ADD TO BASKET
| Observe mounting information | |
| Inner Diameter | 85mm |
| Radial Shaft Seal Design | IWD |
| Swirl Type | Left-hand Twist |
| Material | PTFE (polytetrafluoroethylene) |
| Housing Type | with housing, Housing with Aluminium Lid |
| Article number of the recommended special tool | VW T10017 |
| Supplementary Article/Info 2 | with mounting sleeve |
| Fitting Position | transmission sided |
| Engine Code | AXP, BCA |
| Vehicle Identification Number (VIN) from | 1J-2-650 001 |
| Block Separation | |
| Construction Year to | 07.2003 |
| More information » | |
$40,30
$47,40
-15%
ADD TO BASKET
| Fitting Position | transmission sided |
| Outer Diameter 1 | 131.4mm |
| Material | PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl) |
| Height 1 | 15.5mm |
| Supplementary Article/Info 2 | with mounting sleeve |
| Outer Diameter 2 | 152.7mm |
| Inner Diameter 1 | 85mm |
| Vehicle Identification Number (VIN) from | 1J-2-500 001 |
| More information » | |
$41,40
$48,70
-15%
ADD TO BASKET
| Material | PTFE (polytetrafluoroethylene) |
| Supplementary Article/Info 2 | with flange |
| Fitting Position | transmission sided, transmission sided |
| Vehicle Identification Number (VIN) from | 1J 2 650 001 |
| Engine Code | AXP, BCA |
| Block Separation | |
$41,70
$49,10
-16%
ADD TO BASKET
| Observe mounting information | |
| Inner Diameter | 85mm |
| Radial Shaft Seal Design | IWD |
| Swirl Type | Left-hand Twist |
| Material | PTFE (polytetrafluoroethylene) |
| Housing Type | Housing with Plastic Lid |
| Article number of the recommended special tool | VW T10017 |
| Supplementary Article/Info 2 | with mounting sleeve |
| Fitting Position | transmission sided |
| Engine Code | AHW, AXP |
| Block Separation | |
| Vehicle Identification Number (VIN) to | 1J-2-650 000 |
| More information » | |
$43,00
$50,60
-16%
ADD TO BASKET
| Inner Diameter | 130mm |
| Outer Diameter | 155mm |
| Height | 18mm |
| Swirl Type | Left-hand Twist |
| Material | PTFE (polytetrafluoroethylene) |
| Housing Type | with housing |
| for OE No. | 030103171K |
| Fitting Position | transmission sided |
| Block Separation | |
| Engine Code | BCA, APE, AXP |
| Block Separation | |
| Construction Year to | 10.2001 |
| More information » | |
$44,20
$52,00
-15%
ADD TO BASKET
| Inner Diameter | 85mm |
| Material | PTFE (polytetrafluoroethylene) |
| Fitting Position | transmission sided |
| Weight | 0.14kg |
| Supplementary Article/Info 2 | with flange |
| Observe service information | |
| Engine Code | AXP, AHW |
| Vehicle Identification Number (VIN) to | ******1J*2*650000 |
| Block Separation | |
| More information » | |
$47,60
$56,00
-15%
ADD TO BASKET
| Observe mounting information | |
| Inner Diameter | 85mm |
| Swirl Type | Left-hand Twist |
| Radial Shaft Seal Design | IWD |
| Material | PTFE (polytetrafluoroethylene) |
| Housing Type | with housing, Housing with Plastic Lid |
| Article number of the recommended special tool | VW T10134 |
| Supplementary Article/Info 2 | with mounting sleeve |
| Fitting Position | transmission sided |
| Engine Code | BCA |
| Vehicle Identification Number (VIN) from | 1J-4-000 001 |
| More information » | |
$49,90
$58,70
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
