Sensor / Probe VW TRANSPORTER T5 Van (7HA, 7HH, 7EA, 7EH) 2.0 TSI (150kW / 204hp) 2003 - ...
Previous 1 2 Next
| for manufacturer | VAG |
| Number of pins | 3-pin connector |
| Cable Length | 200mm |
| Socket Width | 1.5mm |
| Supplementary Article/Supplementary Info | with socket housing, with gaskets/seals |
| Supplementary Article/Info 2 | with pipe |
| Contact surface | gold-plated |
| Cable Cross Section | 0.75mm² |
| Temperature range from | -25°C |
| Temperature range to | +140°C |
| Cable insulation material | Silicone |
| Plug housing design | Plug sleeve housing |
| SVHC | No SVHC present! |
| Vehicle Identification Number (VIN) from | 7H-G-000 001 |
| More information » | |
$14,80
$17,50
-16%
ADD TO BASKET
| Quality | OE EQUIVALENT |
| for OE No. | 076906051B |
$15,30
$18,00
-15%
ADD TO BASKET
| Weight | 0.03kg |
| Connector Shape | D Shape |
| Material | PA 6 GF 30 |
| Number of pins | 3-pin connector |
| Signal type | Analogue |
| Pressure from | 0kPa |
| Pressure to | 100kPa |
| More information » | |
$15,30
$18,00
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-SK-000 |
$18,80
$22,10
-15%
ADD TO BASKET
| Number of connectors | 3 |
| Material | Plastic |
| Sensor Type | Differential Pressure Sensor |
| Weight | 0.02kg |
| for OE No. | 059 906 051 C |
$19,60
$23,10
-16%
ADD TO BASKET
| Pressure from | 27kPa |
| Pressure to | 303kPa |
| Output Voltage, from | 0.505V |
| Output Voltage, up to | 4.71V |
| Engine Code | CJKA |
$19,90
$23,40
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Number of circuits | 4 |
$20,50
$24,10
-15%
ADD TO BASKET
| Weight | 0.18kg |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Diagnostic Probe |
| Rated Resistance | 9Ohm |
| Overall Length | 540mm |
| Thread Size | M18X1, 5 |
$21,60
$25,30
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Resistor | 9Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$24,10
$28,30
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Diagnostic Probe |
| Number of circuits | 4 |
| Overall Length | 750mm |
| Fitting Position | after catalytic converter |
$25,30
$29,70
-15%
ADD TO BASKET
oe 076906051b
564 396 076906051b
076 906 051 b
564 396 076906051b
076 906 051 b
| Pressure from | 27kPa |
| Pressure to | 303kPa |
| Output Voltage, from | 0.505V |
| Output Voltage, up to | 4.71V |
| Engine Code | CJKA |
$27,70
$32,50
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Resistor | 9Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$28,00
$32,90
-15%
ADD TO BASKET
| for OE No. | 059906051C |
$28,30
$33,30
-16%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Diagnostic Probe |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Transmission Type | Manual Transmission |
| Fitting Position | after catalytic converter |
$30,10
$35,40
-15%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Recommended change interval | 160, 000km |
| Fitting Position | Rear |
| Connector/Clamp | Connector may need adjustment |
| Number of pins | 4-pin connector |
$32,50
$38,30
-16%
ADD TO BASKET
| Cable Length | 720mm |
| Oxygen Sensor | Planar Sensor, Heated, Diagnostic Probe |
| Fitting Position | after catalytic converter |
$33,20
$39,00
-15%
ADD TO BASKET
| Fitting Position | Rear |
| Oxygen Sensor | Switching-type Oxygen Sensor |
$33,70
$39,60
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe |
| Number of pins | 4-pin connector |
| Connector Shape | D Shape |
| Socket colour | black |
| Cable Length | 1, 050mm |
| for OE No. | 022906262BJ |
| Engine Code | CJKA |
| More information » | |
$37,50
$44,10
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 750mm |
| Length | 29.53Inch |
| Number of pins | 4-pin connector |
| Available as universal article as well, see article no. | OS-15P |
| Specification | Isolated Ground, Planar Type, Zirconia Type |
| Fitting Position | after catalytic converter |
| Engine Code | CJKA |
| for OE No. | 04C906262D, 06E906265E, 06E906265P |
| More information » | |
$39,90
$46,90
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Diagnostic Probe |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 93g |
| Gross Weight | 140g |
| More information » | |
$41,20
$48,50
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
$42,40
$49,90
-16%
ADD TO BASKET
| Cable Length | 800mm |
| Conductor Number | 4conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 1.998.235 |
| Number of circuits | 4 |
| Engine Code | CJKA |
| Fitting Position | after catalytic converter |
| Colour | black |
| More information » | |
$43,00
$50,60
-16%
ADD TO BASKET
| Cable Length | 814mm |
| Oxygen Sensor | Planar Sensor, Heated, Diagnostic Probe |
| Fitting Position | after catalytic converter |
$44,20
$52,00
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe |
| Length | 750mm |
| Number of pins | 4-pin connector |
| Supplementary Article/Info 2 | with mounting manual |
| for Art.No. | 77031 |
| Fitting Position | before catalytic converter, after catalytic converter |
| Oxygen Sensor | Planar Sensor, Thread pre-greased, Heated |
| Number of pins | 4-pin connector |
| Cable Length | 800mm |
| Thread Size | M18x1, 5 |
| Switch Pressure | 4bar |
| Connector Shape | oval |
| Weight | 0.17kg |
| Engine Code | CJKA |
| More information » | |
$53,40
$62,80
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Oxygen Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
$60,90
$65,30
-7%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Colour | red |
| Guarantee | 3 years guarantee |
| Number of circuits | 5 |
| Weight | 0.15kg |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$62,60
$73,70
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Overall Length | 750mm |
| Available as universal article as well, see article no. | 0258986602 |
| Recommended change interval | 250, 000km |
| Oxygen Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
$63,80
$75,10
-16%
ADD TO BASKET
| Oxygen Sensor | Broadband Oxygen Sensor |
| Number of pins | 5-pin connector |
| Cable Length | 610mm |
| Quality | OE EQUIVALENT |
| for OE No. | 03C906262A |
$67,10
$79,00
-16%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
