CV Joint / Set VW GOLF V Variant (1K5) 1.6 MultiFuel (75kW / 102hp) 2007 - 2009
Previous 1 2 Next
| Fitting Position | Wheel Side |
| External Toothing wheel side | 36 |
| Internal Toothing wheel side | 30 |
| Seal diam. | 59.5mm |
| Joint Type | CV Joint |
| Drive Shaft | without ABS ring |
| Length | 95.5mm |
| Outer Diameter | 90mm |
| Surface | Powder coated |
| More information » | |
$29,70
$34,90
-15%
ADD TO BASKET
| Thread Size | M16x1, 5 |
| Fitting Position | Wheel Side, Front Axle Left, Front Axle Right |
| Seal diam. | 59.5mm |
| External Toothing wheel side | 36 |
| Length 2 | 95.5mm |
| Internal Toothing wheel side | 30 |
| Version | 6 balls |
| More information » | |
$31,90
$37,60
-16%
ADD TO BASKET
| Fitting Position | Front Axle |
| External Toothing wheel side | 26 |
| Internal Toothing wheel side | 32 |
$33,00
$38,80
-15%
ADD TO BASKET
| Thread Size | M16x1, 5 |
| Fitting Position | Wheel Side |
| Outer Diameter | 90mm |
| Internal Toothing wheel side | 30 |
| Length | 95.5mm |
| Seal diam. | 59.5mm |
| External Toothing wheel side | 36 |
| More information » | |
$33,30
$39,10
-15%
ADD TO BASKET
| Fitting Position | transmission sided, Front Axle Left |
| External Toothing differential side | 40 |
| Tooth Gaps, transm. side connection | 28 |
| Seal diam. | 46mm |
| Outer Diameter | 98mm |
| Joint Type | CV Joint |
| Fabrication Number | NPW-VW-031 |
| More information » | |
$34,40
$40,50
-16%
ADD TO BASKET
| Length | 34mm |
| Tooth Gaps, profile shaft conn. | 33 |
| Outer Diameter | 99.9mm |
| Num. of holes | 6 |
| Joint Type | Flexible Joint Disc |
$34,80
$40,90
-15%
ADD TO BASKET
| Seal diam. | 59.6mm |
| Outer Diameter | 89.9mm |
| Internal Toothing wheel side | 30 |
| External Toothing wheel side | 36 |
| Fitting Position | Front Axle |
| Length | 34mm |
| Tooth Gaps, transm. side connection | 33 |
| Supplementary Article/Info 2 | with bolts/screws |
$37,10
$43,60
-15%
ADD TO BASKET
| Joint Type | CV Joint |
| Fitting Position | transmission sided |
$37,40
$44,00
-16%
ADD TO BASKET
| Internal Toothing wheel side | 30 |
| External Toothing wheel side | 36 |
| Joint Type | CV Joint |
$37,50
$44,10
-15%
ADD TO BASKET
| Internal Toothing wheel side | 30 |
| Seal diam. | 59.5mm |
| Outer Diameter | 90mm |
| External Toothing wheel side | 36 |
$39,20
$46,10
-15%
ADD TO BASKET
| Fitting Position | transmission sided, Front Axle |
| Weight | 1.932kg |
| Tooth Gaps, transm. side connection | 33 |
| Seal diam. | 100mm |
| Outer Diameter | 99mm |
| Joint Type | Flexible Joint Disc |
| Packaging length | 20cm |
| Packaging width | 10.5cm |
| Packaging height | 10.5cm |
| More information » | |
$40,80
$48,00
-16%
ADD TO BASKET
| Fitting Position | Wheel Side, Front Axle |
| Weight | 2.092kg |
| External Toothing wheel side | 36 |
| Internal Toothing wheel side | 30 |
| Seal diam. | 59mm |
| Outer Diameter | 89mm |
| Joint Type | CV Joint |
| Packaging length | 20cm |
| Packaging width | 10.5cm |
| Packaging height | 10.5cm |
| More information » | |
$42,30
$49,80
-16%
ADD TO BASKET
| Thread Size | M16x1.5 |
| External Toothing wheel side | 36 |
| Internal Toothing wheel side | 30 |
| Seal diam. | 59.5mm |
| Outer Diameter | 90mm |
| Joint Type | CV Joint |
| Machined | with groove in inner part (inside) |
| More information » | |
$43,50
$51,10
-15%
ADD TO BASKET
| Joint Type | Flexible Joint Disc |
| Tooth Gaps, profile shaft conn. | 33 |
| Machined | without groove in internal component |
| Joint Ø | 100mm |
| Length | 34mm |
| Supplementary Article/Info 2 | with top |
| Bore Ø | 8mm |
| Number of bores | 6 |
| Bolt Hole Circle Ø | 86mm |
| Bellows Material | NBR (nitrile butadiene rubber) |
| New Part | |
| Supplementary Article/Supplementary Info | with grease |
| More information » | |
$54,40
$64,00
-16%
ADD TO BASKET
| Joint Type | CV Joint |
| External Toothing wheel side | 36 |
| Internal Toothing wheel side | 30 |
| Seal diam. | 60mm |
| Machined | with groove in internal component |
| Joint Ø | 90mm |
| Length | 95mm |
| Thread Size | M16x1.5 |
| Bellows Material | TPE (thermoplastic elastomer) |
| New Part | |
| Supplementary Article/Supplementary Info | with grease |
| More information » | |
$60,00
$70,60
-16%
ADD TO BASKET
| Joint Type | Flexible Joint Disc |
| Tooth Gaps, profile shaft conn. | 33 |
| Machined | without groove in internal component |
| Joint Ø | 100mm |
| Length | 34mm |
| Supplementary Article/Info 2 | with top |
| Bore Ø | 8mm |
| Number of bores | 6 |
| Bolt Hole Circle Ø | 86mm |
| Bellows Material | NBR (nitrile butadiene rubber) |
| New Part | |
| Supplementary Article/Supplementary Info | with grease |
| More information » | |
$61,40
$72,20
-15%
ADD TO BASKET
| Joint Type | CV Joint |
| External Toothing wheel side | 36 |
| Internal Toothing wheel side | 30 |
| Seal diam. | 60mm |
| Machined | with groove in internal component |
| Joint Ø | 90mm |
| Length | 95mm |
| Thread Size | M16x1.5x77 |
| Bellows Material | TPE (thermoplastic elastomer) |
| New Part | |
| Supplementary Article/Info 2 | with screw |
| Supplementary Article/Supplementary Info | with grease |
| More information » | |
$67,40
$79,30
-16%
ADD TO BASKET
| Joint Type | CV Joint |
| External Toothing wheel side | 36 |
| Internal Toothing wheel side | 30 |
| Seal diam. | 60mm |
| Machined | with groove in internal component |
| Joint Ø | 90mm |
| Length | 95mm |
| Thread Size | M16x1.5 |
| Bellows Material | TPE (thermoplastic elastomer) |
| New Part | |
| Supplementary Article/Supplementary Info | with grease |
| More information » | |
$67,70
$79,60
-15%
ADD TO BASKET
| Joint Type | CV Joint |
| External Toothing wheel side | 36 |
| Internal Toothing wheel side | 30 |
| Seal diam. | 60mm |
| Machined | with groove in internal component |
| Joint Ø | 90mm |
| Length | 95mm |
| Thread Size | M16x1.5x77 |
| Bellows Material | TPE (thermoplastic elastomer) |
| New Part | |
| Supplementary Article/Info 2 | with screw |
| Supplementary Article/Supplementary Info | with grease |
| More information » | |
$76,80
$90,30
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
