Sensors OPEL SIGNUM Hatchback (Z03) 3.2 V6 (F48) (155kW / 211hp) 2003 - 2008
Previous 1 2 3 4 5 6 Next
| Number of pins | 3-pin connector |
| Connector Shape | oval |
| Sensor Type | Hall Sensor |
| Fitting Depth | 14mm |
| for OE No. | 6238111 |
$35,30
$41,50
-15%
ADD TO BASKET
| Resistor | 9Ohm |
| Conductor Number | 4conductor |
| Length | 275mm |
| Number of circuits | 4 |
| Cable Length | 275mm |
| Oxygen Sensor | Heated |
$36,20
$42,60
-16%
ADD TO BASKET
| Cable Length | 520mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
$37,30
$43,80
-15%
ADD TO BASKET
| Frequency Range | 433MHz |
| Version | Direct-Fit TPMS |
| for OE No. | 13172567, 13354312 |
| Specification | Combi Programmable, Complete Unit, For 1 Wheel, Sensor and Valve, TPMS Sensor |
$37,30
$43,80
-15%
ADD TO BASKET
| Frequency Range | 433Hz |
| Permissible Max. Speed | 250km/h |
| Version | Gen Delta |
| Tightening Torque | 6Nm |
| Sensor Type | Active sensor |
| Mounting Type | Clamped |
| Colour | silver |
| Vehicle Identification Number (VIN) | [;E2999999] |
| More information » | |
$38,50
$45,30
-16%
ADD TO BASKET
| Cable Length | 300mm |
| Oxygen Sensor | Planar Sensor, Heated, Diagnostic Probe, Regulating Sensor |
| Block Separation | |
$40,70
$47,90
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 93g |
| Gross Weight | 140g |
| Fitting Position | Left |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$42,60
$50,10
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor, Diagnostic Probe |
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Block Separation | |
| Fitting Position | after catalytic converter, before catalytic converter |
$42,80
$50,30
-15%
ADD TO BASKET
| Length | 250mm |
| Sensor Type | Hall Sensor |
| Number of pins | 3-pin connector |
| Supplementary Article/Info 2 | with cable |
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Length | 600mm |
| Engine Code | Z 32 SE |
$43,30
$50,90
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Overall Length | 300mm |
| Available as universal article as well, see article no. | 0258986615 |
| Recommended change interval | 160, 000km |
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
| More information » | |
$43,30
$50,90
-15%
ADD TO BASKET
| Frequency Range | 433MHz |
| Valve colour | silver |
| Tightening Torque | 8Nm |
| Mounting Type | Bolted |
| Supplementary Article/Info 2 | with groove, with valves |
| Permissible Max. Speed | 250km/h |
| Housing Colour | red |
| More information » | |
$43,40
$51,00
-15%
ADD TO BASKET
| Cable Length | 350mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Heated, Regulating Sensor |
| Assy./disassy. by qualified personnel required! | |
| Fitting Position | before catalytic converter |
$45,00
$52,90
-15%
ADD TO BASKET
| can be programmed | |
| Colour | black |
| Frequency Range | 433MHz |
| Material | Rubber |
| for OE No. | 93461364, 93457916, 13598773, 13516165 |
| can be programmed | |
| Colour | silver |
| Frequency Range | 433MHz |
| Material | Steel |
| for OE No. | 93461364, 93457916, 13598773, 13516165 |
| Line insulation design | with silicone-coated woven-fibre insulation |
| Length | 350mm |
| Thread Size | M18x1, 5mm |
| Resistor | 9Ohm |
| Overall Length | 300mm |
| Cable Length | 300mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Planar Sensor, Thread pre-greased, Regulating Sensor, Diagnostic Probe |
| Engine Code | Z 32 SE |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
| More information » | |
$50,30
$59,20
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Length | 270mm |
| Overall Length | 300mm |
| Cable Length | 300mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Thread pre-greased, Regulating Sensor, Diagnostic Probe |
| Engine Code | Z 32 SE |
| Fitting Position | before catalytic converter, after catalytic converter |
| More information » | |
$51,40
$60,50
-16%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Conductor Number | 4conductor |
| Cable Length | 210mm |
| Engine Code | Z 32 SE |
| Fitting Position | before catalytic converter, after catalytic converter |
$51,70
$60,80
-15%
ADD TO BASKET
| for manufacturer number | 6PX 012 684-041 |
| Assy./disassy. by qualified personnel required! | |
| SVHC | 7439-92-1; Lead |
| Vehicle Equipment | for vehicles with automatic climate control |
| Vehicle Identification Number (VIN) from | 61000001 |
$52,80
$62,10
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 400mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 93186115, 855386 |
| Quality | OE |
| Weight | 83g |
| Gross Weight | 116g |
| Fitting Position | Left |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$55,80
$65,60
-15%
ADD TO BASKET
| Length | 350mm |
| Techn. Info. No. | Universal 77015 |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
$56,50
$66,40
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
| Recommended additional repairs | Air Filter |
$62,30
$73,30
-16%
ADD TO BASKET
| Outer Diameter 1 | 140mm |
| Height 1 | 102mm |
| Rim | 5-Hole |
| Number of Teeth, ABS ring | 96 |
| Supplementary Article/Info 2 | with integrated wheel bearing, with integrated ABS sensor |
| Thread Size | M12 x 1.5 |
| Bolt Hole Circle Ø | 110mm |
| Outer Diameter 2 | 70mm |
| Number of flange connections | 4 |
| Weight | 3.97kg |
| Fitting Position | Rear Axle Left, Rear Axle Right |
| More information » | |
$63,60
$74,80
-15%
ADD TO BASKET
| Fitting Position | Rear Axle |
| Supplementary Article/Supplementary Info | with fastening/mounting material |
| Supplementary Article/Info 2 | with integrated ABS sensor, with integrated wheel bearing |
| Outer Diameter | 140mm |
| Bolt Hole Circle Ø | 110mm |
| Num. of holes | 4 |
| Rim | 5-Hole |
| Bearing Type | Ball Bearing |
| More information » | |
$64,00
$75,30
-16%
ADD TO BASKET
| Fitting Position | Front Axle |
| Supplementary Article/Supplementary Info | with fastening/mounting material |
| Supplementary Article/Info 2 | with integrated ABS sensor, with integrated wheel bearing |
| Inner Diameter | 33mm |
| Outer Diameter | 137mm |
| Width | 130mm |
| Bolt Hole Circle Ø | 105mm |
| Num. of holes | 3 |
| Rim | 5-Hole |
| Bearing Type | Ball Bearing |
| Suspension | for vehicles without IDS-plus suspension |
| More information » | |
$64,70
$76,20
-16%
ADD TO BASKET
| Fitting Position | Front Axle |
| Supplementary Article/Supplementary Info | with fastening/mounting material |
| Supplementary Article/Info 2 | with integrated wheel bearing, with integrated ABS sensor |
| Outer Diameter | 137mm |
| Bolt Hole Circle Ø | 105mm |
| Num. of holes | 3 |
| Rim | 5-Hole |
| Number of Teeth | 30 |
| Bearing Type | Ball Bearing |
| Suspension | for vehicles with IDS-plus suspension |
| More information » | |
$65,30
$76,80
-15%
ADD TO BASKET
| Voltage | 12V |
| Number of pins | 5-pin connector |
| Quantity required | 1 |
$69,30
$81,50
-15%
ADD TO BASKET
| Inner Diameter 1 | 33mm |
| Outer Diameter 1 | 137mm |
| Height 1 | 84mm |
| Rim | 5-Hole |
| Supplementary Article/Info 2 | with integrated wheel bearing, with integrated ABS sensor |
| Thread Size | M12 x 1.5 |
| Bolt Hole Circle Ø | 110mm |
| Outer Diameter 2 | 88.9mm |
| Number of flange connections | 3 |
| Weight | 4.12kg |
| Suspension | for vehicles without IDS suspension |
| Fitting Position | Front Axle Left, Front Axle Right |
| More information » | |
$77,60
$91,30
-16%
ADD TO BASKET
| Inner Diameter 1 | 33mm |
| Outer Diameter 1 | 137mm |
| Height 1 | 84mm |
| Rim | 5-Hole |
| Supplementary Article/Info 2 | with integrated wheel bearing, with integrated ABS sensor |
| Thread Size | M12 x 1.5 |
| Bolt Hole Circle Ø | 110mm |
| Outer Diameter 2 | 89.9mm |
| Number of flange connections | 3 |
| Weight | 3.86kg |
| Vehicle Identification Number (VIN) from | 51000001 |
| Fitting Position | Front Axle Left, Front Axle Right, Front Axle Right, Front Axle Left |
| Block Separation | |
| Suspension | for vehicles with IDS suspension |
| More information » | |
$81,10
$95,40
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
