Tools for removing seals, o-rings
Goods available only in e-shop
Previous 1 2 3 4 Next
61,20€
ADD TO BASKET
Sealey AK709 Gasket Punch Set 10pcCarbon steel body with spring loaded centring pin.Suitable for cutting gasket material or cork, leather etc.Supplied in storage case with nine dies.Model No: AK709Contents: Dies; 5, 6, 8, 10, 12.5, 16, 20, 25, 32mm, PunchTotal Shipping Weight: 1.26kg Sealey was established in 1978 and has become well known for its innovation, quality and service. Headquartered in ...
64,80€
ADD TO BASKET
65,60€
ADD TO BASKET
Injector Seal Removal Tool Designed to remove the copper injector seal when it has stuck into the good. Adjusts to allow seals with 7.5-10mm internal diameter to be removed. Simply drop the tool into the hole left by the injector, tighten the handle and lift out the seal. Model No: VS2054 Minimum/Maximum Internal Size: Ø7.5/10mm Length: 240mm Sealey was established in 1978 and has become well know...
68,10€
ADD TO BASKET
Available 1pc. This tool is designed for dismounting the burned copper washers from the fuel injector chamber. Adjustable expansion three-jaw bites into the copper washer and it comes to its dismounting without any damage of motor head just by upward pulling. If needed, it is possible to use the lever and to pick-up the washer by using the fork wrench. TRIUMF Triumf Professional Tools is an internationally opera...
70,60€
75,70€
-7%
ADD TO BASKET
71,10€
ADD TO BASKET
24 pc set perfect radiaalsete tihendusrõngaste for dismantling radiaalsete tihendusrõngaste mittepurustavaks kokkupanekuks diameter 21,5 up to 64 mm BRILLIANT TOOLS radiaaltihendusrõnga together- and lahtivõtmiskomplekt BT542030 võimaldab radiaalsete tihendusrõngaste easy and mittepurustavat kokkupanekut and lahtivõtmist. different anodeeritud adapterrõngaste abil surutakse new radiaalsed tihendus...
74,20€
ADD TO BASKET
Available 3pc. suitable for PSA- engines, diameter 4...10 mm thread: M16 x 2,0
83,20€
ADD TO BASKET
tool VW crankshaft seal for changing Viide: MGS01540 tool VW crankshaft seal for changing 1.4,1.6 16V 1.9 / 2.0 SDI / TDI, 2.0 CR VW, AUDI, SKODA, SEAT engines
83,70€
ADD TO BASKET
tool bearing and seals installing 9,5-50 mm. strong alumiiniumkonstruktsioon with shaft shaped handle intended different diameter bearing and seals hõlpsaks and comfortable installing without kahjustusteta. Laienevad 3-staged jaws kohanduvad quickly different bearing with diameters. screw keeps reguleeritavaid lõuasid paigal, et neid oleks easy one hand to use. suitable for with most of cars, for ...
87,50€
ADD TO BASKET
Available 1pc. application: Iveco cars 2,3 dimensions/dimesions: Welt: - inner: 50 mm - outside: 79 mm plate: - inner: 32 mm - outside: 100 mm
89,10€
ADD TO BASKET
set bearing, õlitihendite installing 51 elements. suitable for bearing, bushes, tihendusrõngaste and rubber installing. Löögikindlus võimaldab to use hammers. replaceable adapters 50 pc. set contains: steel ajamid 12 mm with shaft, Adapteri sizes: Ø 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49...
96,00€
ADD TO BASKET
Available 2pc. scrapers set tihendijääkide. tihendusmassi. glue etc for removal. Kaabitsatel plastic handle. plastic case. set contains: scraper 12.5x200. 25x200. 12.5x300. 25x300 mm KS TOOLS Werkzeuge - Maschinen GmbH is one of the leading manufacturers of tools and industrial products. The company was founded in 1992 and its head office is located in Heusenstamm, the company employs more than 350 people and ha...
97,80€
106,10€
-8%
ADD TO BASKET
Available 1pc. camshaft etc võllide seals for removal
100,70€
ADD TO BASKET
set for assembly uszczelniacza crankshaft engines
102,60€
ADD TO BASKET
Available 1pc. Special tool designed for dismantling the valve sealing of diameters Ø 10 - 19 mm. Clamping three-jaw in thin case provides quick manipulation. Ideal utilization for 20-valve motor-heads. TRIUMF Triumf Professional Tools is an internationally operating company in Slovakia. Since its establishment in 1999, the company has offered customers high-quality hand tools, special tools, electric and pneuma...
109,90€
119,30€
-8%
ADD TO BASKET
●Specially designed tool to renew crankshaft sealing flange. ●Applicable : For 16V, 20V, 1.9, 2.0 diesel engine since 2006. ●Golf, TOURAN, and Audi A3 4-cyl. Diesel engine 4-valve for fitting sealing flange with integrated sender wheel.
110,40€
117,40€
-6%
ADD TO BASKET
tool bearing and õlitihendite installing 18-90 mm. manufactured strong alumiiniumkonstruktsioonist with shaft shaped handle. intended different diameter bearing and seals hõlpsaks and comfortable installing, without et this kahjustaks neid. Laienevad 3-staged jaws kohanduvad quickly different bearing diameter. screw keeps reguleeritavaid lõuasid paigal, et neid oleks easy one hand to use. suitable...
113,40€
ADD TO BASKET
Available 3pc. device seal for changing - rear crankshaft measurement application: 3.0 with engine cars - Iveco - Fiat Ducato - Peugeot Boxer - Citroeni hüppaja
120,80€
ADD TO BASKET
set of dimesions 18-65 mm (1mm in increments)
122,80€
130,60€
-6%
ADD TO BASKET
Available 1pc. 8-pc set valve spring for the assembly and for dismantling võimaldab to change klapisääretihendeid plokikaant off võtmata survevoolik cylinders pneumatic for filling suitable for M14 and M18 süüteküünlakeermetele contains klapikiil-monteerimistööriist parts set of: 8 weight g: 3720 Videolink Application: Video Packing width mm: 269 Packing height mm: 632 Packing length mm: 918
129,30€
ADD TO BASKET
Available 2pc. This tool is designed for dismounting the burned copper washers from the fuel injector chamber. Adjustable expansion three-jaw bites into the copper washer and it comes to its dismounting without any damage of motor head just by upward pulling. If needed, it is possible to use the lever and to pick-up the washer by using the fork wrench. TRIUMF Triumf Professional Tools is an internationally opera...
130,70€
141,90€
-8%
ADD TO BASKET
set õlitihendite for dismantling Universal 22 pc. set is intended for camshafts and crankshaft seals for removal and installing engine without kahjustusteta. set of compact rööbastüüpi tõmbur, which has special replaceable hooks chin fast for removal. this set võimaldab teil vändatihendi to change without pedal crank arm korpust additionally opening and prevent pedal crank arm surface cleaning. su...
134,30€
ADD TO BASKET
Available 1pc. crankshaft õlitihendi tool VW Crafter 2.5 TDI . ● specially Volkswagen Crafter 2006-13 .: ● Võlliratta end olev oil seal on integrated õlitihendi korpusesse and kiiruseanduriga and it is with ring contains. Kui oil seal on damaged, vahetage oil seal out. ● VW Crafteri rakendamine (2006-2013) engine codes: BJJ, BJK, BJL, BJM 2.5L Blue TDI, CEBA, CEBB, CECA, CECB. OEM T50010
134,50€
ADD TO BASKET
set of dimesions 70-150 mm (5mm in increments)
141,30€
150,30€
-6%
ADD TO BASKET
Available 3pc. A comprehensive kit for removing and installing oil seals without damaging a new seal or housing. The kit includes a gasket removal puller and seven adapters to fit most gasket sizes. Designed to allow the original pulley/flange bolt to be used to press in a new seal, ensuring a square seal every time. Supplied in a storage box. Adapter size(s): 28, 34, 42, 46, 49, 56, 64 mm Bolt adapters: 8, 10, ...
149,70€
ADD TO BASKET
Available 2pc. käigukastipoolsete radiaaltihendirõngaste for the assembly paigaldamiskatse without It's tool may cause lekkekohti, new tihendirõngaste damages and engine halba toimimist suitable for VAG-vehicles 1.4 and 1.6 16V with engine for use like OEM T10017 for models: Seat Škoda VW Mootorikoodid: weight g: 1800 OE-Code Audi: T10017 OE-Code Seat: T10017 OE-Code Skoda: T10017 Packing length mm: 162 Mootori...
159,60€
ADD TO BASKET
suitable for 27-58mm for seals.
168,50€
179,20€
-6%
ADD TO BASKET
Available 1pc. It is possible to mount and dismount the new shaft seals into camshafts in the motor-head by using this tool without the necessity of complete disassembling. Suitable for sealing diameters from 27 to 58 mm. Blue round pieces are made from aluminium, in order to prevent the camshaft damage. Set includes: adapters for central screw: M8 - M10 - M12 - M14 - M16 - M18 - M20. TRIUMF Triumf Professional ...
180,50€
201,10€
-11%
ADD TO BASKET
Available 2pc. Area of use: Gasoline engines: 1.4 turbo and 1.4 and 1.6 with direct injection diesel engines 1.9 and 2.0 SDI, 2.0 TDI CR SEAT: Arosa 1.4, Ibiza 1.4, Cordoba 1.4, Leon 1.4 / 1.6, Toledo 1.4 / 1.6 and Inca 1.4 16v SKODA: Fabia 1.4, Fabia II 1.6, Octavia 1.4 and Roomster VW4 : /po1.4 / 1.4 / 16v. 1.6, PoloClassic 1.4, Golf / Bora 1.4 / 1.6, Beetle 1.4, Caddy 1.4 16vGallery OEM CODE: T10017 / T1013...
197,70€
ADD TO BASKET