manual vacuum pump kit

Available 1pc. A manual pump that creates a vacuum. It is intended, for example, to check the correctness of the work:

When checking the installation of the fuel supply system (e.g. in the event of a fuel pump failure), it black be observed whether there are air bubbles in the fuel
pressure sensors (working area)
exhaust gas recirculation valve
throttle lever
fuel pressure regulator
pressure modulator in automatic transmissions
brake assist etc.
It is also used by one person to bleed the brake system.
Thanks to the additional equipment, it is suitable for all passenger cars.

The set includes:

metal pump with pressure gauge in the range (0 <-> 76 cm Hg) (-1 to 0 bar)
2 flexible hoses, approx. 600 mm long
a set of connecting terminals with wires
a set of connecting terminals and connectors
container
2 caps per container.
Functional characteristics:

to check the correct operation of the fuel supply system
to check the correct operation of pressure sensors, exhaust gas recirculation valve, throttle valve, fuel pressure regulator, automatic transmission pressure modulator, brake assist.

frequently asked Questions
1. What is the maximum vacuum value in the pump?

-1 bar.

2. How many wires and how long is the pump?

2 flexible hoses, approx. 600 mm long.

3. What is the main purpose of the device?

Checking the operation of the fuel supply system.